Export limit exceeded: 25322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74424 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles. | ||||
| CVE-2026-72208 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: add bounds check before accessing EA entries in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough space in the EA entry before accessing the next_entry_offset field of the EA entry. | ||||
| CVE-2026-72207 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: not change 0-byte $DATA attribute to non-resident When ntfs_resident_attr_resize() cannot grow a resident attribute in place, it retries after converting other resident attributes to non-resident to free space in the MFT recrord. Do not select zero-length resident $DATA attributes for this conversion. fsck treats 0-byte non-resident $DATA attribute as corruptions. | ||||
| CVE-2026-72202 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid heap allocation for free-cluster readahead state get_nr_free_clusters() allocates a temporary file_ra_state before it publishes the precomputed free cluster count, sets NVolFreeClusterKnown(), and wakes vol->free_waitq. If that allocation fails, the worker returns without setting the flag or waking waiters, so callers waiting for the free count can block indefinitely. The readahead state is only used synchronously while scanning the bitmap. Keep it on the stack and pass it by address to the readahead helper. This eliminates the early allocation failure path instead of adding a special case that publishes a conservative count and wakes the waitqueue. Zero-initialize the on-stack state because file_ra_state_init() only sets ra_pages and prev_pos. Apply the same treatment to __get_nr_free_mft_records(), which scans the MFT bitmap with the same short-lived readahead state. | ||||
| CVE-2026-72201 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate index entries on reading Validate index entries immediately after reading an index root or index block from disk. This eliminates repeated checks in lookup and readdir, and reduce the risk of missing checks in those paths. | ||||
| CVE-2026-72010 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ] | ||||
| CVE-2026-68463 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately. | ||||
| CVE-2026-68473 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address() mask_user_address() incorrectly checks for CONFIG_E500 instead of CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on E500 hardware. Fix the check to use the correct name. | ||||
| CVE-2026-72011 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/diag: Add missing array_index_nospec() call to memtop_get_page_count() 'level' is user space controlled and used to read from an array. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72038 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: liquidio: fix BAR resource leak on PF number failure If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review. | ||||
| CVE-2026-72039 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp() If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation. | ||||
| CVE-2026-68455 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type. | ||||
| CVE-2026-68457 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for FSCTL mutations SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB handle but call VFS xattr, fallocate or fileattr helpers with the current ksmbd worker credentials. Those helpers can revalidate inode permissions, ownership and LSM policy independently of the SMB handle access mask. Run each operation with the credentials captured in the target file when the handle was opened. Keep credential handling local to these single-file FSCTLs rather than applying session credentials to the complete IOCTL handler, which also contains handle-less and multi-handle operations. | ||||
| CVE-2026-68465 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases. | ||||
| CVE-2026-68478 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: reject a card that reports too many blocks msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks. | ||||
| CVE-2026-72004 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix memory leak in ieee80211_register_hw() If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-72007 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge and AXI clock may have a timing issue. Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is de-asserted by HW) Add a bool variable is_errata_err050531 in 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround is needed. If is_errata_err050531 is true, first clear the clk before powering up gpc, then enable the clk after powering up gpc. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A | ||||
| CVE-2026-72008 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of one to generic_pm_domain as, even if that's still working, this is way too much fragile and would break at some point. | ||||
| CVE-2026-72022 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model. | ||||
| CVE-2026-72032 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. Fix the leak by destroying the replacement matcher before returning from the resize-target failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed. | ||||