Export limit exceeded: 105450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (105450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98166 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix swapped-out resources never leaving their bulk_move range ttm_tt_swapout() returns the number of pages swapped out on success and a negative error code on failure; for a populated ttm it never returns zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") moved the bulk_move bookkeeping in ttm_bo_swapout_cb() under "if (!ret)", so the ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail() pair is now skipped on every successful swapout. The equivalent change for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure") tests "lret > 0", which is what was intended here as well. Before b2ed01e7ad3d the resource was taken off the bulk_move before the swapout; since then a swapped-out resource stays inside its BO's bulk_move range (and on the manager LRU) although it is unevictable. When it is later freed or the BO leaves the bulk_move (ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()), ttm_resource_del_bulk_move() skips it because of its !ttm_resource_unevictable() guard, so a range endpoint in pos->first / pos->last is left pointing at freed memory. The next ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(), "list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL dereference in ttm_resource_manager_next() -- minutes to hours after a hibernation, or at process exit / reboot following one. Samuel Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the dangling cursor; the missing removal at swapout time is the reason it dangles. Testing the condition for success restores the removal. On an AMD Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug crashed 5 of 18 hibernation cycles; a function profile of one hibernation showed 336 ttm_tt_swapout() calls and zero ttm_resource_del_bulk_move_unevictable() calls. With this change the removal happens for every swapped-out resource and 12 further cycles were clean. | ||||
| CVE-2026-105788 | 1 Microsoft | 1 Ufo | 2026-10-07 | 8.8 High |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.10, the type_text and launch_app tools in ufo/client/mcp/http_servers/mobile_mcp_server.py pass the authenticated caller-controlled text and package_name parameters into adb shell command argument positions without comprehensive validation. The adb client joins those arguments into a remote command string that the Android shell reparses, allowing shell metacharacters to execute additional commands on an authorized connected device as the Android shell user. Exploitation requires a valid Mobile MCP API key and a reachable device authorized for ADB, and it does not establish host operating-system execution, Android root execution, or access beyond the Android shell-user privileges. This issue is fixed in version 3.0.10. | ||||
| CVE-2026-98169 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. | ||||
| CVE-2026-98164 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo] | ||||
| CVE-2026-98163 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L) | ||||
| CVE-2026-105797 | 1 Microsoft | 1 Simplechat | 2026-10-07 | 8.8 High |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. In versions 0.261.003 and 0.261.027, an authorization ordering flaw in POST /api/user/plugins allows an authenticated low-privileged user to omit the top-level MCP type so that _reject_non_admin_mcp_stdio skips inspection before the type is restored from metadata. The stored personal action can then reach McpPluginFactory.create_connector, and MCPStdioPlugin.connect starts the attacker-selected operating-system process under the application service identity when the action tool is invoked. Exploitation requires personal plugins to be enabled and governance to permit MCP actions, and it can expose or modify secrets and data available to the service or disrupt the service. This issue is fixed in version 0.261.031. | ||||
| CVE-2026-105798 | 1 Microsoft | 1 Simplechat | 2026-10-07 | 8.7 High |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. Prior to 0.261.029, POST /api/group_documents/upload stores an attacker-controlled group document filename that group_workspaces.html later interpolates into inline Share event handlers. The escapeGroupHtml function leaves apostrophes unchanged, while escapeHtml produces an HTML entity that the browser decodes before JavaScript evaluation, so either path permits the filename to terminate the handler string. An authenticated group Owner, Admin, or DocumentManager can persist script that executes in the SimpleChat origin when another group member clicks Share, allowing access to victim-visible data and actions with the victim session. This issue is fixed in version 0.261.029. | ||||
| CVE-2026-61411 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 7.7 High |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | ||||
| CVE-2026-26287 | 1 External-secrets | 1 External-secrets | 2026-10-07 | 7.1 High |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Starting in version 0.10.0 and prior to version 1.3.2, a bug in the `webhook` generator initialization order incorrectly cleared the label-enforcement flag (`EnforceLabels`) after it was set, resulting in the provider-side check for `external-secrets.io/type=webhook` being skipped (and the operation to succeed while it should have failed with `secret does not contain needed label 'external-secrets.io/type: webhook'. Update secret label to use it with webhook`. Version 1.3.2 contains a patch. | ||||
| CVE-2026-104850 | 1 Modelcontextprotocol | 1 Typescript-sdk | 2026-10-07 | 7.5 High |
| MCP TypeScript SDK is the official TypeScript SDK for Model Context Protocol servers and clients. Starting in version 1.12.0 and prior to versions 1.31.0 and 2.2.0, the SDK's OAuth client support let the MCP server a client connected to decide which authorization server received the client's OAuth credentials. Stored and pre-provisioned credentials were not bound to the authorization server they belong to. A malicious or compromised MCP server could name its own authorization server in its protected resource metadata. Without any user interaction, the client would send that server the `refresh_token` and `client_secret` stored from an earlier sign-in (1.x), or the configured `client_secret` or signed assertion of a bundled non-interactive provider (1.x and 2.x). Only those applications that use the SDK as an MCP client over HTTP with an `authProvider`: your own `OAuthClientProvider`, or the bundled `ClientCredentialsProvider`, `PrivateKeyJwtProvider`, `StaticPrivateKeyJwtProvider` or (2.x) `CrossAppAccessProvider` and that may connect to an MCP server the owners does not fully trust while holding credentials for a legitimate authorization server are affected. `@modelcontextprotocol/sdk` 1.31.0 (1.x) and `@modelcontextprotocol/client` 2.2.0 (2.x) patch the issue. A workaround for those who cannot upgrade is available. 2.0.0 and 2.1.0 already accept `expectedIssuer`. On 1.x, the only workaround is to connect OAuth-enabled clients only to MCP servers you trust. | ||||
| CVE-2026-98231 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_state_flush() finds states under xfrm_state_dev_gc_lock, but drops the lock before calling xfrm_dev_state_free() because the driver callback may sleep. The device GC list does not hold an xfrm_state reference, so the state GC worker can destroy the same state concurrently. The race can proceed as follows: CPU 0 CPU 1 find x on the device GC list drop xfrm_state_dev_gc_lock read x->xso.dev xfrm_state_gc_destroy(x) xfrm_dev_state_free(x) xfrm_state_free(x) continue xfrm_dev_state_free(x) Both paths can invoke the driver callback and drop the device reference. CPU 0 can also access the xfrm_state after CPU 1 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0 Read of size 8 at addr ffff88810bbaa960 by task poc/102 Call Trace: xfrm_dev_state_free+0x24c/0x2a0 xfrm_dev_state_flush+0x353/0x400 xfrm_dev_event+0x26d/0x3a0 notifier_call_chain+0xc0/0x280 __dev_notify_flags+0x169/0x250 netif_change_flags+0xe7/0x160 dev_change_flags+0x96/0x220 devinet_ioctl+0x7f4/0x1880 Allocated by task 87: xfrm_state_alloc+0x1e/0x5c0 xfrm_add_sa+0xe7f/0x5820 xfrm_user_rcv_msg+0x4f3/0x940 Freed by task 57: kmem_cache_free+0xcb/0x3d0 xfrm_state_gc_task+0x4a8/0x650 process_one_work+0x63a/0x1070 Serialize xfrm_state destruction against the deferred-device pass with a mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain the existing callback and device-reference release ordering. | ||||
| CVE-2026-106112 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106117 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-106118 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-98167 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix server->total_read for compound encrypted PDUs In receive_encrypted_standard(), server->total_read is left at the full decrypted frame size when walking sub-PDUs of a compound encrypted frame. As a result, cifs_handle_standard() passes this full size to smb2_check_message(), causing the PDU length guards to incorrectly validate the entire compound frame instead of the current sub-PDU. This allows truncated non-last sub-PDUs to bypass length validation, leading to out-of-bounds reads in smb2_get_data_area_len(). Fix this by setting server->total_read to the true length of the current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining pdu_length for the last one. | ||||
| CVE-2026-56906 | 1 Google | 1 Android | 2026-10-07 | 7 High |
| In ep_free of eventpoll.c, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-98181 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0–63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots. | ||||
| CVE-2026-98271 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove the first bytes of a packet and reallocate skb->head. All the headers that were present before the operation are gone, but both functions call skb_headers_offset_update(skb, 0), which is a no-op : skb->mac_header, skb->network_header, skb->transport_header and skb->csum_start keep their old values and now describe bytes which are no longer there. Both helpers size the new head from the old skb_end_offset(), so the stale offsets still land inside the new allocation. They point past skb_tail_pointer() though, to bytes that were never initialized. pskb_carve_inside_nonlinear() is the worst case, because it leaves a zombie skb with an empty linear part (skb->data == skb_tail_pointer(skb), skb_headlen(skb) == 0), while skb_mac_header_was_set() is still true and skb->mac_header is way ahead of skb->data. The only user of pskb_extract() is rds_tcp_data_recv(), and the carved skb is queued on tinc->ti_skb_list. When the RDS incoming message is released, rds_tcp_inc_free() calls skb_queue_purge(), which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is visible from drop_monitor, which then tries to pull back to the (bogus) mac header : skbuff: __skb_pull(len=234) skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0 end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288 shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5)) csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0) hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60 kernel BUG at ./include/linux/skbuff.h:2847! Add skb_carve_reset_headers() to mark the mac and transport headers as not set, reset the network header, clear skb->mac_len, and drop a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes anything). Invalidate the inner offsets as well. Unlike mac_header and transport_header they have no "unset" sentinel, so a leftover non-zero value still looks like a real header. Zero skb->inner_mac_header, skb->inner_network_header, skb->inner_transport_header, skb->inner_protocol and skb->encapsulation, so that all the header state is invalidated in one place. v2: fixed an inaccurate changelog. The stale offsets stay inside the new skb->head, which is never smaller than the old one, they simply point past skb_tail_pointer() to bytes that are gone. Thanks to Xuanqiang Luo for insisting on this. Also invalidate the inner header state, as suggested by the netdev AI review : https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com | ||||
| CVE-2026-98314 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since substream->timer is set to the new timer just once, after a successful registration -- so the failure path stays safe. | ||||
| CVE-2026-106443 | 1 Kozea | 1 Weasyprint | 2026-10-07 | 8.8 High |
| WeasyPrint helps web developers to create PDF documents. Prior to 70.0, the image-loading path in weasyprint/images.py passes fetched image bytes from HTML img URLs, CSS image values, SVG image references, and data URIs to Pillow's generic image dispatcher without excluding EPS or PostScript formats. On hosts with Ghostscript installed, Pillow EpsImagePlugin invokes the interpreter for attacker-controlled PostScript, which can produce interpreter-permitted effects and can lead to remote code execution when the installed Ghostscript version has a usable sandbox bypass. Hosts without Ghostscript do not reach this rasterization path. This issue is fixed in version 70.0. | ||||