Export limit exceeded: 428361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 428361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 112156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (112156 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50714 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix rmmod crash in driver reload test In insmod/rmmod stress test, the following crash dump shows up immediately. The problem is caused by missing mt76_dev in mt7921_pci_remove(). We should make sure the drvdata is ready before probe() finished. [168.862789] ================================================================== [168.862797] BUG: KASAN: user-memory-access in try_to_grab_pending+0x59/0x480 [168.862805] Write of size 8 at addr 0000000000006df0 by task rmmod/5361 [168.862812] CPU: 7 PID: 5361 Comm: rmmod Tainted: G OE 5.19.0-rc6 #1 [168.862816] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, 05/04/2020 [168.862820] Call Trace: [168.862822] <TASK> [168.862825] dump_stack_lvl+0x49/0x63 [168.862832] print_report.cold+0x493/0x6b7 [168.862845] kasan_report+0xa7/0x120 [168.862857] kasan_check_range+0x163/0x200 [168.862861] __kasan_check_write+0x14/0x20 [168.862866] try_to_grab_pending+0x59/0x480 [168.862870] __cancel_work_timer+0xbb/0x340 [168.862898] cancel_work_sync+0x10/0x20 [168.862902] mt7921_pci_remove+0x61/0x1c0 [mt7921e] [168.862909] pci_device_remove+0xa3/0x1d0 [168.862914] device_remove+0xc4/0x170 [168.862920] device_release_driver_internal+0x163/0x300 [168.862925] driver_detach+0xc7/0x1a0 [168.862930] bus_remove_driver+0xeb/0x2d0 [168.862935] driver_unregister+0x71/0xb0 [168.862939] pci_unregister_driver+0x30/0x230 [168.862944] mt7921_pci_driver_exit+0x10/0x1b [mt7921e] [168.862949] __x64_sys_delete_module+0x2f9/0x4b0 [168.862968] do_syscall_64+0x38/0x90 [168.862973] entry_SYSCALL_64_after_hwframe+0x63/0xcd Test steps: 1. insmode 2. do not ifup 3. rmmod quickly (within 1 second) | ||||
| CVE-2025-40210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now. | ||||
| CVE-2025-40220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why. | ||||
| CVE-2025-4046 | 1 Lexmark | 1 Cloud Services | 2026-04-15 | 8.5 High |
| A missing authorization vulnerability in Lexmark Cloud Services badge management allows attacker to reassign badges within their organization | ||||
| CVE-2025-40238 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec cleanup over MPV device When we do mlx5e_detach_netdev() we eventually disable blocking events notifier, among those events are IPsec MPV events from IB to core. So before disabling those blocking events, make sure to also unregister the devcom device and mark all this device operations as complete, in order to prevent the other device from using invalid netdev during future devcom events which could cause the trace below. BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 146427067 P4D 146427067 PUD 146488067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40 RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206 RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00 RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000 R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600 R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80 FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core] mlx5_devcom_send_event+0x8c/0x170 [mlx5_core] blocking_event+0x17b/0x230 [mlx5_core] notifier_call_chain+0x35/0xa0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core] mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib] mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib] ? idr_alloc_cyclic+0x50/0xb0 ? __kmalloc_cache_noprof+0x167/0x340 ? __kmalloc_noprof+0x1a7/0x430 __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe9/0x310 [mlx5_ib] ? kernfs_add_one+0x107/0x150 ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] auxiliary_bus_probe+0x3e/0x90 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x62d/0x830 __auxiliary_device_add+0x3b/0xa0 ? auxiliary_device_init+0x41/0x90 add_adev+0xd1/0x150 [mlx5_core] mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core] esw_mode_change+0x6c/0xc0 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x170/0x170 ? devlink_nl_eswitch_get_doit+0x290/0x290 ? devlink_nl_pre_doit_port_optional+0x50/0x50 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __sys_recvmsg+0x4e/0x90 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f27bc91b13a Code: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff ---truncated--- | ||||
| CVE-2025-40246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. | ||||
| CVE-2022-50721 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. | ||||
| CVE-2022-50723 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix memory leak in bnxt_nvm_test() Free the kzalloc'ed buffer before returning in the success path. | ||||
| CVE-2025-40279 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_connmark: initialize struct tc_ife to fix kernel leak In tcf_connmark_dump(), the variable 'opt' was partially initialized using a designatied initializer. While the padding bytes are reamined uninitialized. nla_put() copies the entire structure into a netlink message, these uninitialized bytes leaked to userspace. Initialize the structure with memset before assigning its fields to ensure all members and padding are cleared prior to beign copied. | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2025-40312 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2025-40329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits] | ||||
| CVE-2025-40327 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix system hang caused by cpu-clock usage cpu-clock usage by the async-profiler tool can trigger a system hang, which got bisected back to the following commit by Octavia Togami: 18dbcbfabfff ("perf: Fix the POLL_HUP delivery breakage") causes this issue The root cause of the hang is that cpu-clock is a special type of SW event which relies on hrtimers. The __perf_event_overflow() callback is invoked from the hrtimer handler for cpu-clock events, and __perf_event_overflow() tries to call cpu_clock_event_stop() to stop the event, which calls htimer_cancel() to cancel the hrtimer. But that's a recursion into the hrtimer code from a hrtimer handler, which (unsurprisingly) deadlocks. To fix this bug, use hrtimer_try_to_cancel() instead, and set the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer() to stop the event once it sees the PERF_HES_STOPPED flag. [ mingo: Fixed the comments and improved the changelog. ] | ||||
| CVE-2025-40348 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts If two competing threads enter alloc_slab_obj_exts() and one of them fails to allocate the object extension vector, it might override the valid slab->obj_exts allocated by the other thread with OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and expects a valid pointer to dereference a NULL pointer later on. Update slab->obj_exts atomically using cmpxchg() to avoid slab->obj_exts overrides by racing threads. Thanks for Vlastimil and Suren's help with debugging. | ||||
| CVE-2025-40353 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Do not warn if the page is already tagged in copy_highpage() The arm64 copy_highpage() assumes that the destination page is newly allocated and not MTE-tagged (PG_mte_tagged unset) and warns accordingly. However, following commit 060913999d7a ("mm: migrate: support poisoned recover from migrate folio"), folio_mc_copy() is called before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the copy will be done again to the same destination page. Since copy_highpage() already set the PG_mte_tagged flag, this second copy will warn. Replace the WARN_ON_ONCE(page already tagged) in the arm64 copy_highpage() with a comment. | ||||
| CVE-2025-4044 | 2 Lexmark, Microsoft | 2 Universal Print Driver, Windows | 2026-04-15 | 8.2 High |
| Improper Restriction of XML External Entity Reference in various Lexmark printer drivers for Windows allows attacker to disclose sensitive information to an arbitrary URL. | ||||
| CVE-2025-40591 | 1 Siemens | 11 Ruggedcom Rox Mx5000, Ruggedcom Rox Mx5000re, Ruggedcom Rox Rx1400 and 8 more | 2026-04-15 | 7.7 High |
| A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.5), RUGGEDCOM ROX MX5000RE (All versions < V2.16.5), RUGGEDCOM ROX RX1400 (All versions < V2.16.5), RUGGEDCOM ROX RX1500 (All versions < V2.16.5), RUGGEDCOM ROX RX1501 (All versions < V2.16.5), RUGGEDCOM ROX RX1510 (All versions < V2.16.5), RUGGEDCOM ROX RX1511 (All versions < V2.16.5), RUGGEDCOM ROX RX1512 (All versions < V2.16.5), RUGGEDCOM ROX RX1524 (All versions < V2.16.5), RUGGEDCOM ROX RX1536 (All versions < V2.16.5), RUGGEDCOM ROX RX5000 (All versions < V2.16.5). The 'Log Viewers' tool in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated remote attacker to execute the 'tail' command with root privileges and disclose contents of all files in the filesystem. | ||||
| CVE-2025-40595 | 1 Sonicwall | 1 Sma1000 | 2026-04-15 | 7.2 High |
| A Server-side request forgery (SSRF) vulnerability has been identified in the SMA1000 Appliance Work Place interface. By using an encoded URL, a remote unauthenticated attacker could potentially cause the appliance to make requests to unintended location. | ||||
| CVE-2025-52264 | 1 Starcharge | 1 Artemis | 2026-04-15 | 8 High |
| StarCharge Artemis AC Charger 7-22 kW v1.0.4 was discovered to contain a stack overflow via the cgiMain function at download.cgi. | ||||