Export limit exceeded: 419993 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (419993 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99254 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round. | ||||
| CVE-2026-99234 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free. | ||||
| CVE-2026-99229 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/wait: don't spin on a stuck overflow list As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule() returns right away, before it gets to look at signals or arms the timeout, for io_cqring_wait() to flush the overflow list. If that doesn't empty the list, and the CQ ring doesn't hold the number of events the caller wants, the loop starts over, with the same result. The task spins in the kernel, and can't be killed. The assumption is that this can't happen: if CQEs can't be flushed, the ring is full, and min_events is capped to the size of the ring. But: - With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It is stuck on the list if a single one is free, and then the ring holds less than cq_entries events. A single threaded application that asks for as many events as the ring has entries never gets out of io_uring_enter(). - Whether the ring is full is up to the CQ head, which the application can write to. While one thread waits for events on an empty ring, another one can move the head back so that the ring looks full and have a CQE overflow. The waiter can't be stopped any more, not even by SIGKILL. Only the application can make room in the CQ ring. Return to it if the list could not be flushed. | ||||
| CVE-2026-99222 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: Protect the read method check against type removal keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore. | ||||
| CVE-2026-99220 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: asymmetric_keys: reject trust keys without IDs The PKCS#8 parser deliberately leaves the asym_key_ids payload slot empty. key_or_keyring_common() unconditionally dereferences that slot when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the plain and :chain forms reach this branch, allowing an unprivileged caller to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING followed by add_key(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279) Call Trace: <TASK> __key_create_or_update (security/keys/key.c:884) key_create_or_update (security/keys/key.c:1021) __do_sys_add_key (security/keys/keyctl.c:134) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject an asymmetric restriction key without key IDs. A PKCS#8 private key cannot identify the signer of a candidate certificate and is not a valid trust anchor. | ||||
| CVE-2026-90724 | 1 Dell | 1 Powerprotect Data Domain Management Center | 2026-11-03 | 2.7 Low |
| Dell PowerProtect Data Domain Management Center, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | ||||
| CVE-2026-86401 | 1 Dell | 1 Powerprotect Data Domain Management Center | 2026-11-03 | 2.7 Low |
| Dell PowerProtect Data Domain Management Center, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. | ||||
| CVE-2026-77800 | 1 Zohocorp | 1 Manageengine Key Manager Plus | 2026-11-03 | 7.7 High |
| ManageEngine Key Manager Plus versions before 7151 are vulnerable to a SAML authentication bypass that allows attackers to log in using SAML assertions meant for another service provider. | ||||
| CVE-2026-63499 | 2026-11-03 | N/A | ||
| zt-zip is a Java library that provides convenience methods for ZIP archive manipulation. Prior to 1.18.1, ZipUtil.unpack(...) can apply stored ZIP-entry permissions to the extraction output directory when an entry name such as / or ./ resolves to that directory itself. Because the path traversal checks permit self-referencing entries that do not escape the destination, the unpacker's permission-handling path can replace restrictive output-directory permissions with attacker-supplied permissions. This affects applications that unpack untrusted ZIP files, and POSIX systems demonstrate the issue directly, while ZTFilePermissionsUtil.fetchDefaultStrategy provides fallback permission handling on other supported systems. This issue is fixed in version 1.18.1. | ||||
| CVE-2026-63470 | 2026-11-03 | N/A | ||
| fastapi-code-generator creates FastAPI applications from OpenAPI files. Prior to 0.8.1, the generator inserts Operation.summary into a generated route-handler docstring as a triple-double-quoted string without escaping embedded triple quotes. An attacker-controlled or attacker-influenced operation summary can close the docstring and inject a valid Python expression statement into the handler body. Syntax-breaking input only causes generation to fail, but syntactically valid generated code executes with the server process's privileges when the affected route handler is called. This call-time route-handler docstring sink is distinct from the project's separate import-time route-path and additional-response-key sinks. This issue is fixed in version 0.8.1. | ||||
| CVE-2026-63198 | 2026-11-03 | 7.3 High | ||
| traQ is a messenger application built for Digital Creators Club traP. Prior to 3.28.3, OAuth2 silent authorization requests using prompt=none with an empty or omitted scope parameter check prior consent against the empty requested scope set even though all scopes registered for the client become eligible for issuance. An attacker who controls an OAuth client capable of receiving authorization codes can target a user who previously consented to only some client scopes and obtain an access token containing broader registered scopes without additional consent. A user who has never consented to the client still receives consent_required. This issue is fixed in version 3.28.3. | ||||
| CVE-2026-4052 | 1 Wso2 | 5 Api Control Plane, Api Manager, Wso2 Api Control Plane and 2 more | 2026-11-03 | 9.8 Critical |
| This issue only impacts deployments where WSO2 Identity Server is configured as a Resident Key Manager with database sharing. In such environments, a self-registered user may gain access to the System REST APIs of WSO2 API Manager by obtaining a token from the WSO2 Identity Server token endpoint. | ||||
| CVE-2026-44266 | 2026-11-03 | 9.8 Critical | ||
| Elo is a purely functional expression language for no-code tools. Prior to 1.0.1, the Ruby backend in src/compilers/ruby.ts embeds attacker-controlled text in Ruby double-quoted strings without escaping #, so Ruby interpolation forms in the string-literal emitter or the labelled subtype-constraint branch become executable Ruby. The affected entry points include the /try playground with the Ruby target, bin/eloc -t ruby -x, and defaultFormats.elo.parse() followed by Ruby emission. A failing labelled subtype constraint evaluates its message, while an ordinary string literal is evaluated when the compiled Ruby runs, allowing Ruby code and shell command execution through backticks. JavaScript, Python, and SQL emission are not affected by this Ruby-specific path. This issue is fixed in version 1.0.1. | ||||
| CVE-2026-16900 | 1 Zohocorp | 3 Eventlog Analyzer, Log360, Manageengine Eventlog Analyzer | 2026-11-03 | 7.5 High |
| Zohocorp ManageEngine Log360 and EventLog Analyzer versions 13071 and below are vulnerable to an authentication bypass in local collector registration, allowing unauthenticated actor to register a local collector by sending a specially crafted registration request. | ||||
| CVE-2026-13594 | 1 Zohocorp | 3 Eventlog Analyzer, Log360, Manageengine Eventlog Analyzer | 2026-11-03 | 9.1 Critical |
| Zoho Corporation's ManageEngine Log360 and EventLog Analyzer versions 13062 and below are vulnerable to an issue that could allow an adversary to gain unauthorized access to the product. | ||||
| CVE-2026-121652 | 1 Aws | 1 Maplibre-gl-js-amplify | 2026-11-03 | 5.4 Medium |
| Cross-site scripting (XSS) issue in AWS Amplify maplibre-gl-js-amplify before 4.0.3 might allow remote authenticated users to inject arbitrary web script or HTML via the (1) title, (2) address, or (3) place_name property in GeoJSON feature data rendered by popupRender, or the (4) geofenceId value rendered in AmplifyGeofenceControl. To remediate this issue, users should upgrade to 4.0.3 or later. | ||||
| CVE-2026-121382 | 1 Netcore | 1 Nbr100v2 | 2026-11-03 | 7.5 High |
| A vulnerability was determined in Netcore NBR100V2 1.3.240614.030928. Affected by this issue is the function msg_aes_dec of the file /usr/bin/auto_ac. This manipulation causes integer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-120953 | 2026-11-03 | 4.3 Medium | ||
| A URI redirection weakness exists in the authentication component of the Atlas SQL JDBC Driver. During an interactive sign-in flow the driver accepts endpoint addresses supplied by the remote endpoint it is pointed at without validating their scheme, and passes the resulting address to the local default protocol handler. An unauthenticated remote party that controls the endpoint a user elects to connect to may cause an address of its choosing to be opened on the user's system; user interaction is required. | ||||
| CVE-2026-116845 | 1 Netbox | 1 Netbox | 2026-11-03 | 5.4 Medium |
| NetBox from 2.9.0 before 4.7.4 contains a broken access control vulnerability in BulkComponentCreateView that allows authenticated users to bypass view permissions on parent devices and virtual machines. Attackers with add-component permission can submit arbitrary device or VM IDs, or _all with filters, to view out-of-scope device details and create components on them. | ||||
| CVE-2026-115231 | 1 Eclipse | 1 Threadx | 2026-11-03 | N/A |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager lets a user-mode, memory-protected module post a forged callback request to another module's callback request queue. The receiving module's callback thread calls the function pointer in the request without checking that the Module Manager sent it, so the attacker's code runs with the receiving module's privilege; when that module runs in privileged mode, a user-mode module gains privileged execution. | ||||