Export limit exceeded: 425897 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 111317 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (111317 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71255 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2024-49219 | 1 Themexpo | 1 Rs-members | 2026-05-11 | 8.8 High |
| Incorrect Privilege Assignment vulnerability in themexpo RS-Members rs-members allows Privilege Escalation.This issue affects RS-Members: from n/a through <= 1.0.3. | ||||
| CVE-2025-21794 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints() Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from hid-thrustmaster driver. This array is passed to usb_check_int_endpoints function from usb.c core driver, which executes a for loop that iterates over the elements of the passed array. Not finding a null element at the end of the array, it tries to read the next, non-existent element, crashing the kernel. To fix this, a 0 element was added at the end of the array to break the for loop. [1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad | ||||
| CVE-2026-43184 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions. | ||||
| CVE-2026-31780 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation The variable valuesize is declared as u8 but accumulates the total length of all SSIDs to scan. Each SSID contributes up to 33 bytes (IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10) SSIDs the total can reach 330, which wraps around to 74 when stored in a u8. This causes kmalloc to allocate only 75 bytes while the subsequent memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte heap buffer overflow. Widen valuesize from u8 to u32 to accommodate the full range. | ||||
| CVE-2026-31782 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Fix potential bad container_of in intel_pmu_hw_config Auto counter reload may have a group of events with software events present within it. The software event PMU isn't the x86_hybrid_pmu and a container_of operation in intel_pmu_set_acr_caused_constr (via the hybrid helper) could cause out of bound memory reads. Avoid this by guarding the call to intel_pmu_set_acr_caused_constr with an is_x86_event check. | ||||
| CVE-2025-71254 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2024-41149 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: avoid to reuse `hctx` not removed from cpuhp callback list If the 'hctx' isn't removed from cpuhp callback list, we can't reuse it, otherwise use-after-free may be triggered. | ||||
| CVE-2026-43196 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put(). | ||||
| CVE-2026-43203 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis. | ||||
| CVE-2025-71251 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In IMS, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2026-43205 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ... | ||||
| CVE-2026-37461 | 1 Osrg | 1 Gobgp | 2026-05-11 | 7.5 High |
| An out-of-bounds read in the ParseIP6Extended function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message. | ||||
| CVE-2026-43212 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which is a valid index - so add a check for this. | ||||
| CVE-2023-53721 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan() In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 | ||||
| CVE-2023-53720 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Release the label when replacing existing ct entry Cited commit doesn't release the label mapping when replacing existing ct entry which leads to following memleak report: unreferenced object 0xffff8881854cf280 (size 96): comm "kworker/u48:74", pid 23093, jiffies 4296664564 (age 175.944s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002722d368>] __kmalloc+0x4b/0x1c0 [<00000000cc44e18f>] mapping_add+0x6e8/0xc90 [mlx5_core] [<000000003ad942a7>] mlx5_get_label_mapping+0x66/0xe0 [mlx5_core] [<00000000266308ac>] mlx5_tc_ct_entry_create_mod_hdr+0x1c4/0xf50 [mlx5_core] [<000000009a768b4f>] mlx5_tc_ct_entry_add_rule+0x16f/0xaf0 [mlx5_core] [<00000000a178f3e5>] mlx5_tc_ct_block_flow_offload_add+0x10cb/0x1f90 [mlx5_core] [<000000007b46c496>] mlx5_tc_ct_block_flow_offload+0x14a/0x630 [mlx5_core] [<00000000a9a18ac5>] nf_flow_offload_tuple+0x1a3/0x390 [nf_flow_table] [<00000000d0881951>] flow_offload_work_handler+0x257/0xd30 [nf_flow_table] [<000000009e4935a4>] process_one_work+0x7c2/0x13e0 [<00000000f5cd36a7>] worker_thread+0x59d/0xec0 [<00000000baed1daf>] kthread+0x28f/0x330 [<0000000063d282a4>] ret_from_fork+0x1f/0x30 Fix the issue by correctly releasing the label mapping. | ||||
| CVE-2023-53717 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Fix a stack-out-of-bounds write that occurs in a WMI response callback function that is called after a timeout occurs in ath9k_wmi_cmd(). The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that could no longer be valid when a timeout occurs. Set wmi->last_seq_id to 0 when a timeout occurred. Found by a modified version of syzkaller. BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx Write of size 4 Call Trace: memcpy ath9k_wmi_ctrl_rx ath9k_htc_rx_msg ath9k_hif_usb_reg_in_cb __usb_hcd_giveback_urb usb_hcd_giveback_urb dummy_timer call_timer_fn run_timer_softirq __do_softirq irq_exit_rcu sysvec_apic_timer_interrupt | ||||
| CVE-2023-53710 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 | ||||
| CVE-2023-53703 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix for shift-out-of-bounds Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. | ||||
| CVE-2023-53697 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu() Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function 'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function 'unregister_nvdimm_pmu'. | ||||