Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (423976 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74378 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | ||||
| CVE-2026-74377 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP. | ||||
| CVE-2026-74376 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: reset read_slot when reusing r10bio for discard put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. | ||||
| CVE-2026-74367 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74365 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh. | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74349 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | ||||
| CVE-2026-74340 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-74333 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74332 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74330 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. | ||||
| CVE-2026-74325 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree() after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents future RCU readers from obtaining the pointer -- it does not wait for existing readers that already hold it via rcu_dereference. The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer via rcu_dereference just before the NULL assignment, it will dereference freed memory after the kfree. struct mt76_vif_link already contains an rcu_head field that is unused at this free site -- a developer oversight, since the adjacent kfree_rcu_mightsleep call for rx_sc in the same function shows the pattern was understood. Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). | ||||
| CVE-2026-74323 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb() If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine, mt7996 driver leaks an already allocated tx token. Fix the issue releasing the token in case of error. | ||||
| CVE-2026-74321 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards. | ||||
| CVE-2026-74316 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Handle layout stid in nfsd4_drop_revoked_stid() nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a client sends FREE_STATEID for an admin-revoked layout stid, the default branch releases cl_lock and returns without unhashing or releasing the stid. The stid remains in the IDR and on the per-client list until the client is destroyed. Remove the layout stid from the per-client list and call nfs4_put_stid() to drop the creation reference. When the refcount reaches zero, nfsd4_free_layout_stateid() handles the remaining cleanup: cancelling the fence worker, removing from the per-file list, and freeing the slab object. | ||||