Export limit exceeded: 423974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (423974 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72342 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path. | ||||
| CVE-2026-72339 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | ||||
| CVE-2026-72335 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72334 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets. | ||||
| CVE-2026-72330 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | ||||
| CVE-2026-72323 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. | ||||
| CVE-2026-72322 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix potential UAF in MLD delayed work A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-72317 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||
| CVE-2026-72312 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules. | ||||
| CVE-2026-72310 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | ||||
| CVE-2026-72304 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put In sof_ipc4_bytes_put(), the copy size is derived from the old data->size in the buffer rather than the incoming new data's size field from ucontrol. If the new data has a different size, the copy uses the wrong length: it may truncate valid data or copy stale bytes. Fix by validating and using the incoming data's sof_abi_hdr.size from ucontrol before copying. | ||||
| CVE-2026-72303 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | ||||
| CVE-2026-72302 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | ||||
| CVE-2026-72301 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get In sof_ipc3_bytes_put(), the size used for the memcpy is derived from the old data->size already in the buffer, not the incoming new data's size field. If the new data has a different size, the copy length is wrong: it may truncate valid data or copy stale bytes. Similarly, sof_ipc3_bytes_get() checks data->size against max_size without accounting for the sizeof(struct sof_ipc_ctrl_data) offset of the flex array within the allocation. Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata) from the bounds check to match the actual available space. | ||||
| CVE-2026-72299 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 </TASK> The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context. | ||||
| CVE-2026-72298 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | ||||
| CVE-2026-72297 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: reject out-of-range traffic classes in QoS validation Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted. | ||||