Export limit exceeded: 10692 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10692 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45801 | 1 Glpi-project | 1 Glpi | 2026-09-26 | N/A |
| GLPI is a free asset and IT management software package. From 0.72 until 10.0.26 and 11.0.8, an authenticated user without the required permission can enable debug mode. The affected user-setting update does not enforce the privilege boundary intended to restrict debug-mode activation. This issue is fixed in versions 11.0.8 and 10.0.26. | ||||
| CVE-2026-93206 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read() decides how much of the config space is readable based on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling read(), not the credentials of the process that opened the file. The sysfs equivalent, pci_read_config(), has checked the credentials of the opening process since commit de139a339395 ("pci: check caps from sysfs file open to read device dependent config space"), so a privileged process can open the config space file and pass the file descriptor to an unprivileged process (for example, a process running a KVM guest with an assigned device), which can then read the entire config space. The check was subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci: use security_capable() when checking capablities during config space read") and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs: use proper file capability helper function"). Thus, the two interfaces check the same capability against different credentials. Checking the credentials of the task calling read() makes the outcome depend on who reads rather than who opened, so the restriction is bypassed whenever a more privileged process reads through the descriptor. Checking the credentials recorded in file->f_cred settles the decision at open() time and ties it to the file, where it cannot change with the caller. Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in effect when the file was opened, bringing the procfs interface in line with the sysfs behaviour. As a result, a file descriptor opened by a privileged process and passed to an unprivileged one now allows the entire config space to be read through procfs, matching sysfs. | ||||
| CVE-2026-79153 | 2026-09-26 | 7.8 High | ||
| Seclore FileSecure Desktop Client before 3.25.1.0 contains improper access control vulnerability in the kernel-mode driver component that allows an authenticated local user to gain elevated privileges to NT AUTHORITY\SYSTEM on affected systems. | ||||
| CVE-2026-97895 | 1 Krayin | 1 Laravel-crm | 2026-09-25 | 6.3 Medium |
| A vulnerability was determined in krayin laravel-crm up to 2.2.5. This affects an unknown part of the file packages/Webkul/Admin/src/Http/Controllers/Settings/UserController.php of the component User Management. Executing a manipulation of the argument role_id can lead to improper privilege management. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.2.6 is able to mitigate this issue. This patch is called 5469d70336fbb25e8e513683e82b32982ce8aa82. Upgrading the affected component is advised. | ||||
| CVE-2026-93901 | 2 Ihomefinder, Wordpress-extensions | 2 Optima Express Idx, Optima Express Idx | 2026-09-25 | 7.3 High |
| The Optima Express IDX plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 8.7.5. This is due to the `provisionBlogCredentials()` function in `iHomefinderAdmin.php` being reachable via the `wp_ajax_nopriv_ihf_clear_cache` AJAX action — through the call chain `iHomefinderAjaxHandler::clearCache()` → `activateAuthenticationToken()` → `getAuthenticationInfo()` → `provisionBlogCredentials()` — with no capability check, nonce verification, or ownership validation, and the function unconditionally calling `$user->set_role('author')` on whichever WordPress account matches the hard-coded login `optima-express` via `get_user_by('login', 'optima-express')`. This makes it possible for unauthenticated attackers to escalate a pre-registered `optima-express` account to the Author role, gaining `publish_posts`, `upload_files`, and `edit_published_posts` capabilities, including access to the plugin's own `/wp-json/optima-express/v1/blog-post` REST endpoint. Exploitation requires open user registration to be enabled on the target site, and the attacker must register the `optima-express` username before the plugin has had the opportunity to provision that login for its own integration account. | ||||
| CVE-2026-63349 | 1 Agronholm | 1 Anyio | 2026-09-25 | 4.4 Medium |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. In 4.14.0, AnyIO accepts the POSIX extra_groups argument in anyio.run_process() and anyio.open_process(), but open_process() forwards the group argument to the backend instead of extra_groups. A caller that supplies extra_groups=[] to clear inherited supplementary groups can therefore launch a child that retains the parent process groups, undermining a privilege-dropping boundary. If group is also supplied, the integer group value is passed where an iterable of supplementary groups is expected and the launch can fail with TypeError. This issue affects POSIX applications that rely on AnyIO subprocess helpers to launch less-privileged child processes. This issue is fixed in version 4.14.2. | ||||
| CVE-2026-61413 | 1 Dell | 2 Policy Manager For Secure Connect Gateway, Secure Connect Gateway Policy Manager | 2026-09-25 | 6.8 Medium |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Privilege Management vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | ||||
| CVE-2026-73589 | 1 Dell | 2 Policy Manager For Secure Connect Gateway, Secure Connect Gateway Policy Manager | 2026-09-25 | 6.3 Medium |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains a Weak Encoding for Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Protection mechanism bypass, and Unauthorized access. | ||||
| CVE-2026-93282 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix maximum allowed access checks The DACL permission check looks for an ACE matching the current user and falls back to the Everyone ACE. It does not consider an Authenticated Users ACE, even though an authenticated session is a member of that well-known group. As a result, opening a file whose access is granted through S-1-5-11 can incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users ACE as a fallback entry alongside Everyone. The maximal access calculation also combines access masks from every ACE, regardless of whether its SID applies to the current user. This can grant rights belonging to an unrelated principal. Process only ACEs applying to the user, Everyone, or Authenticated Users, and accumulate allowed and denied masks in ACL order. Preserve explicitly requested access bits so they are validated against the resulting maximal mask. When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL requires a security privilege that ksmbd does not grant. For regular files, include FILE_EXECUTE in maximal access when the client requested GENERIC_EXECUTE and the DACL grants the complete file-read set. Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This matches the POSIX file ACL mapping without broadening specific execute requests. Do not replace rights from an applicable NT ACE with a POSIX ACL entry. The POSIX ACL is only a fallback when no user, Everyone, or Authenticated Users ACE applies; otherwise it can incorrectly broaden the stored DACL. This fixes smb2.maximum_allowed.maximum_allowed. | ||||
| CVE-2026-89426 | 2026-09-25 | 8.8 High | ||
| The Knit Pay – Cashfree, Instamojo, Razorpay, PayPal and more plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 9.6.1.0. This is due to the `maybe_update_user_role()` function reading the target role directly from an attacker-controlled Gravity Forms entry field — configured via the feed's `user_role_field_id` — and passing it to `WP_User::set_role()` without validating the supplied value against an allowlist of permitted roles. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to administrator by tampering with the hidden role field value at form submission time. Exploitation is further enabled by the fact that $0 orders are synchronously marked as SUCCESS during form submission without requiring a real payment, and when no GF User Registration user can be resolved, the role assignment target falls back to `$lead['created_by']` — the currently authenticated submitter's own user ID — making any authenticated form submitter an eligible exploitation target. | ||||
| CVE-2026-76669 | 3 Arubanetworks, Hewlett Packard Enterprise (hpe), Hpe | 3 Edgeconnect Sd-wan Orchestrator, Edgeconnect Sd-wan Gateways, Edgeconnect Operating System | 2026-09-25 | 9.9 Critical |
| Privilege escalation vulnerabilities exist in the API of HPE Networking EdgeConnect SD-WAN Orchestrator. Successful exploitation could allow a remote low-privileged authenticated user to escalate their privileges to those of an administrative user, leading to complete system compromise. | ||||
| CVE-2026-76670 | 3 Arubanetworks, Hewlett Packard Enterprise (hpe), Hpe | 3 Edgeconnect Sd-wan Orchestrator, Edgeconnect Sd-wan Gateways, Edgeconnect Operating System | 2026-09-25 | 9.9 Critical |
| Privilege escalation vulnerabilities exist in the API of HPE Networking EdgeConnect SD-WAN Orchestrator. Successful exploitation could allow a remote low-privileged authenticated user to escalate their privileges to those of an administrative user, leading to complete system compromise. | ||||
| CVE-2026-76687 | 3 Arubanetworks, Hewlett Packard Enterprise (hpe), Hpe | 3 Edgeconnect Sd-wan Orchestrator, Edgeconnect Sd-wan Gateways, Edgeconnect Operating System | 2026-09-25 | 7.5 High |
| A vulnerability in the API endpoint of HPE Networking EdgeConnect SD-WAN Orchestrator could allow a low-privilege authenticated remote attacker to escalate privileges. Successful exploitation of this vulnerability may enable the attacker to execute arbitrary system commands with root privileges on the underlying operating system. | ||||
| CVE-2026-14281 | 2 101gen, Wordpress | 2 Automation Web Platform – Notifications And Otp For Woocommerce, Advanced Country Code, Wordpress | 2026-09-25 | 9.8 Critical |
| The Automation Web Platform – Notifications and OTP for WooCommerce, Advanced Country Code plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.8.6. This is due to missing permission enforcement on the publicly accessible REST route `POST /wp-json/wawp/v1/signup/<op>` and the absence of a key allowlist in the `finish_registration_logic` function, which copies the attacker-controlled `wawp_custom_fields` parameter directly into `update_user_meta()` — allowing sensitive meta keys such as `wp_capabilities` and `wp_user_level` to be set by the caller. This makes it possible for unauthenticated attackers to register a new account with the administrator role and gain full administrative access to the site. When OTP verification is enabled at signup, the OTP session token (`otp_transient`) is returned in plaintext in the HTTP response body, and the `handle_magic_link_request()` handler marks that token as verified on any unauthenticated GET request containing it without ever checking the OTP code value — making the OTP step trivially bypassable with no inbox or SMS access required. | ||||
| CVE-2026-81792 | 2 Multivendorx, Wordpress | 2 Product Catalog Enquiry For Woocommerce By Multivendorx, Wordpress | 2026-09-25 | 6.5 Medium |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. | ||||
| CVE-2026-48172 | 2 Litespeed Technologies, Litespeedtech | 3 Cpanel Plugin, Litespeed Cpanel Plugin, Litespeed Whm Plugin | 2026-09-24 | 9.8 Critical |
| LiteSpeed User-End cPanel Plugin before 2.4.5 allows privilege escalation (possibly to root), as exploited in the wild in May 2026. Detection is best done via a command line of grep -rE "cpanel_jsonapi_func=redisAble" /var/cpanel/logs /usr/local/cpanel/logs/ 2>/dev/null in Bash. If you get no output, you have not been hit with exploitation of the vulnerability. If there is output, we recommend you examine the IP addresses in the list, determine if they are valid IP addresses, and if not, block them. To determine damage done, examine the system logs for use by the detected IP addresses. The issue is related to mishandling of Redis enable/disable features. The recommended minimum version is 2.4.7. | ||||
| CVE-2026-46817 | 1 Oracle | 2 E-business Suite, Payments | 2026-09-24 | 9.8 Critical |
| Vulnerability in the Oracle Payments product of Oracle E-Business Suite (component: File Transmission). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Payments. Successful attacks of this vulnerability can result in takeover of Oracle Payments. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-58874 | 1 Google | 1 Android | 2026-09-24 | 7.8 High |
| In multiple functions of SmsController.java, there is a possible escalation of privilege due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-81161 | 2 Content Moderation Notifications Project, Drupal | 2 Content Moderation Notifications, Content Moderation Notifications | 2026-09-24 | 3.3 Low |
| Privilege Defined With Unsafe Actions vulnerability in Drupal Content Moderation Notifications allows Privilege Escalation. This issue affects Content Moderation Notifications versions: from 0.0.0 to 3.9.0. | ||||
| CVE-2026-58846 | 1 Google | 1 Android | 2026-09-24 | 7.8 High |
| In kvm_iommu_map_sg of iommu.c, there is a possible use after free due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||