Export limit exceeded: 25313 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25313 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98374 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack() When tcp_send_synack() replaces the cloned SYN skb at the head of the retransmit queue with a copy, it frees the original with tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack. tp->retransmit_skb_hint keeps pointing at the freed skbuff_fclone_cache object. The dangling hint is read in tcp_verify_retransmit_hint() and used as the root of the rbtree walk in tcp_xmit_retransmit_queue(). An unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with an attacker-supplied ICMP fragmentation-needed message, after which a simultaneous open frees the armed SYN skb: BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) Read of size 4 at addr ffff88800604d928 by task swapper/1/0 Call Trace: tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) tcp_simple_retransmit (net/ipv4/tcp_input.c:3158) tcp_v4_err (net/ipv4/tcp_ipv4.c:587) Sync the hint to the copy. | ||||
| CVE-2026-98373 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: preserve mremap address delta when skipping page tables move_hugetlb_page_tables() optimizes mremap() by advancing to the last entry in the page table when the source page table does not exist, either initially or after unsharing a PMD table. The common loop increment then steps to the first entry in the next page table. However, the code advances both the source and destination addresses to the last entries in their respective page tables, which is wrong. The destination address must be advanced only by the same amount as the source address. If the source and destination offsets within their page tables differ, the destination address can be advanced too far, causing follow-up issues. Fix this by advancing the destination address by the source advance distance. With a reproducer, we were able to trigger a kernel panic on x86-64. With this fix in place, we can no longer reproduce the issue. | ||||
| CVE-2026-58649 | 3 Apple, Linux, Microsoft | 9 Macos, Linux Kernel, .net and 6 more | 2026-10-07 | 6.5 Medium |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-98361 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks CoW and the write lands in the private page. Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never modifies memory, and the FLUSH access bits do not make the umem writable, so classifying flushes as writes would make every flush against a flush-only MR fail. | ||||
| CVE-2026-98172 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally. | ||||
| CVE-2026-98358 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/iser: reject a remote invalidation of an unregistered direction A write command whose data is sent entirely as immediate data is not registered. iser_reg_mem_fastreg() takes the DMA key path and leaves rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has already set dir[ISER_DIR_OUT]. iser_check_remote_inv() looks at dir[] alone and hands the descriptor to iser_inv_desc(), which reads desc->sig_protected. A target that answers such a command with IB_WR_SEND_WITH_INV faults the initiator. Leaving those commands unregistered is deliberate. The same function already terminates the connection when a target sends a remote invalidation the initiator did not ask for. A target that invalidates a direction that was never registered is in the same class, so give it the same answer. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: rxe_wq do_work RIP: 0010:iser_task_rsp+0x6d6/0xec0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04 RSP: 0018:ffff88811b008db8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848 RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020 RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0 R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800 R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> __ib_process_cq+0xe1/0x390 ib_poll_handler+0x6e/0x200 irq_poll_softirq+0x1df/0x480 ? clockevents_program_event+0x2ba/0x860 ? __pfx_irq_poll_softirq+0x10/0x10 handle_softirqs+0x18e/0x590 ? __pfx_handle_softirqs+0x10/0x10 ? __hrtimer_rearm_deferred+0x156/0x450 do_softirq+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x61/0x70 __alloc_skb+0x732/0x890 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx___alloc_skb+0x10/0x10 ? _raw_read_unlock_irqrestore+0x16/0x50 rxe_init_packet+0x16b/0x4f0 prepare_ack_packet+0xb8/0x830 rxe_receiver+0x499/0x9980 ? __pfx_rxe_receiver+0x10/0x10 ? rxe_completer+0x29e5/0x38c0 ? hrtimer_start_range_ns_common+0x75f/0x1730 ? hrtimer_start_range_ns+0xa6/0x2c0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_rxe_receiver+0x10/0x10 do_work+0x144/0x470 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||
| CVE-2026-98353 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables Locked QP and CQ lookups from EQ interrupts can deadlock with create-path XArray updates. If an interrupt arrives while the create path holds the plain xa_lock, the lookup spins forever trying to acquire the same lock. Use IRQ-safe XArray helpers for all QP and CQ create-path updates, including the GSI QP store and error paths. Initialize both arrays with XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state. | ||||
| CVE-2026-98354 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs ib_mad_enforce_security() before linking recv_buf onto that list. On failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees the ib_mad_private of every buffer found there. As the list is still empty at that point, nothing is freed at all. The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL right after ib_mad_complete_recv() returns, assuming the MAD layer took ownership of the buffer. Every MAD that fails the PKey check therefore leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA), and a remote node can trigger this repeatedly by sending MADs with a wrong PKey. Link recv_buf onto rmpp_list right after the list is initialized, so the error path has something to free. | ||||
| CVE-2026-102490 | 3 Docker, Linux, Zammad | 3 Docker, Linux Kernel, Zammad | 2026-10-07 | 9.8 Critical |
| All versions of Zammad including the latest alpha enable the local zammad user to escalate privileges to root. | ||||
| CVE-2026-102489 | 3 Docker, Linux, Zammad | 3 Docker, Linux Kernel, Zammad | 2026-10-07 | 9.8 Critical |
| Zammad versions 6.3.0 to 6.5.4 are vulnerable a session hijack vulnerability that leads to remote code execution as the zammad user. The bug is also present in version 7.0.0 to version 7.1.2, but not exploitable due to changes in the underlying framework. | ||||
| CVE-2026-98254 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does. | ||||
| CVE-2026-98230 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: use hlist_del_init_rcu for state_cache and state_cache_input Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete") converted bydst/bysrc/byseq/byspi from hlist_del_rcu() to hlist_del_init_rcu() so that a second __xfrm_state_delete() on the same object becomes a no-op rather than a write through LIST_POISON pprev. It missed state_cache and state_cache_input, which kept hlist_del_rcu(): - hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so hlist_unhashed() returns false. - hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed() returns true. A second __xfrm_state_delete() therefore enters __hlist_del() on the already-deleted state_cache/state_cache_input nodes and does WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free once the slab is reused. The corruption can in turn cause a subsequent hlist_for_each_entry_rcu traversal to follow a dangling next pointer, producing the read use-after-free reported in xfrm_input_state_lookup(). Switch state_cache and state_cache_input to hlist_del_init_rcu() to match the other four lists, closing the write use-after-free and, with it, the read use-after-free it spawns. | ||||
| CVE-2026-98260 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exec: Cleanup POSIX timers right after de_thread() A per-thread CPU timer holds a reference to the PID of the thread it is attached to and, while it is armed, its node is queued in that thread's posix_cputimers. The task is looked up by that PID. When a non-leader thread exec()s, de_thread() changes which task owns that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL, but the node is still queued on tsk, which is alive. timer_lock_sighand() takes a failed lookup to mean that the node is already dequeued, so it has nothing to undo. begin_new_exec() calls posix_cpu_timers_exit(me) right after exec_task_namespaces() and that removes the leftover node, so the state normally stays invisible. But bprm->point_of_no_return is set before de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or exec_task_namespaces() fails, the task dies before it gets there. exit_itimers() then frees the k_itimer while its node is still queued, and reaping tsk later erases that freed node from the rbtree. In short: the non-leader thread B the parent timer_create(CLOCK_THREAD_CPUTIME_ID) timer_settime() arm_timer() // the node is queued on B execve() de_thread(B) exchange_tids(B, leader) // B's PID now belongs to the leader release_task(leader) __exit_signal(leader) posix_cpu_timers_exit(leader) // cleans leader's queue, not B's __unhash_process(leader) // that PID has no task anymore exec_mmap() mmap_read_lock_killable(old_mm) kill(B, SIGKILL) // -EINTR get_signal() do_exit() exit_itimers() posix_timer_delete() posix_cpu_timer_del() posix_timer_unhash_and_free() // freed while still queued wait4() release_task(B) posix_cpu_timers_exit(B) cleanup_timerqueue() timerqueue_del() // use-after-free Move the POSIX timer cleanup right after de_thread() before any of the later failure conditions brings the task into do_exit(). [ tglx: Move the cleanup right after de_thread() ] | ||||
| CVE-2026-98276 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless. | ||||
| CVE-2026-98311 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_stacked_transfer_operstate() before register_netdevice(). If the lower device is dormant, that queues the new netdev on lweventlist while it is still uninitialized. If registration fails after that, for example because of an invalid name such as "bad/name", free_netdev() immediately frees the object. A later linkwatch_fire_event() then use-after-frees the list entry. Move the transfer to after netdev_upper_dev_link(), as macvlan and ipvlan already do. | ||||
| CVE-2026-98359 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete. | ||||
| CVE-2026-98339 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison. | ||||
| CVE-2026-98357 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed memory. Count the deferred control PDU completions per connection and let isert_wait_conn() wait for them before the release work is queued. ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs iscsit_logout_post_handler(), which ends up waiting for conn->conn_wait_comp, and that completion is only sent by iscsit_close_connection() after it has called iscsit_wait_conn(). Waiting for it here would deadlock. Its wait stays the existing isert_wait4logout(). The splat below is from a kernel with tracing printk()s and an msleep(200) injected into isert_do_control_comp() to widen the window: BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620 Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182 CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: isert_comp_wq isert_do_control_comp Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x3e/0x70 ? isert_put_cmd+0x53d/0x620 kasan_report+0xce/0x100 ? isert_put_cmd+0x53d/0x620 isert_put_cmd+0x53d/0x620 ? isert_completion_put+0x305/0x330 ? isert_do_control_comp+0x2ef/0x310 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 48: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x158/0x370 isert_cma_handler+0x1e3/0x2ae0 cma_cm_event_handler+0x3e/0x240 cma_ib_req_handler+0x17d9/0x4490 cm_process_work+0x41/0x330 cm_work_handler+0x5727/0xc160 process_one_work+0x633/0x1030 worker_thread+0x45b/0xd10 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 Freed by task 184: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x121/0x380 iscsit_close_connection+0x7cf/0x1e60 iscsit_take_action_for_connection_exit+0x1b6/0x360 iscsi_target_tx_thread+0x472/0x690 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-98341 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a scan is running, cfg80211 completes the scan towards userspace and frees the scan request. However, the driver can be convinced that it owns the request, since the cancellation is (intended to be) asynchronous. The WARN_ON() in the netdev notifier was meant to catch this, but it's not actually avoidable, so it triggers and we get a UAF in scan_done(). There doesn't seem to be a great way around it, so just track that the driver is still convinced it owns the request, and then just free it on completion if it was already cancelled. Also remove the warnings since they can trigger in the intended architecture. | ||||