Search Results (1958 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99804 1 Linux 2 Linux, Linux Kernel 2026-11-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: save worker type before dropping its reference io_wq_cancel_tw_create() inspects cb->func after calling io_worker_cancel_cb(). For an existing worker, that call can drop the last worker reference and wake io_worker_exit(). If the canceling task is preempted, the worker can be unlinked and freed by kfree_rcu() before the callback function is inspected. KASAN reports a slab-use-after-free read in this path. Save whether the callback belongs to an unpublished continuation worker while its reference is still held, then use the saved result for the conditional free. This preserves the existing accounting and frees only the worker allocated for the canceled continuation.
CVE-2026-99761 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway.
CVE-2026-99800 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: io_uring: free the task context after a grace period A task other than the owner can free a request, io_ring_exit_work() running the local task_work of a DEFER_TASKRUN ring for example, or io_do_iopoll() reaping completions. io_put_task() then takes the else branch: percpu_counter_sub(&tctx->inflight, 1); if (unlikely(atomic_read(&tctx->in_cancel))) wake_up(&tctx->wait); put_task_struct(tctx->task); The first line is what lets the owner leave io_uring_cancel_generic(), and on exec it frees the tctx right after. Nothing holds that off for the remaining three lines, the task reference only covers a tctx freed along with the task_struct. It used to work out because io_uring_del_tctx_node() took the uring_lock that the freeing side holds across io_put_task(), until that moved to tctx_lock. Free the tctx with kfree_rcu(), and enter an RCU read section in io_put_task() before the count is dropped.
CVE-2026-99792 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332)
CVE-2026-99783 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: Fix use-after-free in disable_usb9pfs() disable_usb9pfs() frees the IN and OUT usb_request objects before it disables the corresponding endpoints. If either request is still queued, the later usb_ep_disable() call cancels the endpoint queue and the UDC driver can still access the already freed request. With dummy_hcd and KASAN, this is reproducible by queueing the OUT request and then disconnecting the configfs gadget: BUG: KASAN: slab-use-after-free in dummy_disable+0x2b4/0x300 Read of size 8 at addr ffff888009702400 by task sh/1 usb_ep_disable+0x8e/0x1f0 usb9pfs_func_unbind+0x193/0x350 gadget_dev_desc_UDC_store+0x135/0x280 dummy_free_request() also warns because the request is freed while its queue entry is still linked. Disable both endpoints before freeing the request objects. This lets usb_ep_disable() cancel any queued transfers and invoke the completion callback while the request storage is still valid. The request objects are then freed only after they have been removed from the endpoint queues.
CVE-2026-99755 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then list_first_entry() without holding ptp->tsevqs_lock, the spinlock that "protects tsevqs from concurrent access". Every other accessor of the list honours it: ptp_open() (list_add_tail), ptp_release() (list_del followed by kfree of the per-fd queue), ptp_clock_release() and ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only one that does not. A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and removed and freed on close(), both under tsevqs_lock: scoped_guard(spinlock_irq, &ptp->tsevqs_lock) list_del(&queue->qlist); bitmap_free(queue->mask); kfree(queue); So a read of /sys/class/ptp/ptpN/fifo running concurrently with a close() of a /dev/ptpN fd can have list_count_nodes() walk into the queue that close() is removing and freeing, dereferencing freed memory (use-after-free) or a poisoned list pointer. Take tsevqs_lock around the list walk. The fifo only ever draws from the first queue, which is the registration-time queue created in ptp_clock_register() and freed only in ptp_clock_release(); that cannot run while the sysfs attribute is being read, so the dequeue from queue->buf under queue->lock may stay outside tsevqs_lock and the lock order is unchanged.
CVE-2026-99765 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs() *before* the ACL is linked onto tpg->acl_node_list by target_add_node_acl(): core_tpg_check_initiator_node_acl(): ... core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */ target_add_node_acl(acl); /* only now listed */ The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only tpg->acl_node_list, so a dev entry whose ACL is still in the window above is invisible to the sweep and is never disabled. It is left on the se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when the same unpacked_lun is later re-added and the se_lun is reallocated at the same address, the stale dev entry is rediscovered by target_nacl_find_deve() and core_enable_device_list_for_node() corrupts lun_deve_list: BUG: KASAN: slab-use-after-free ... core_enable_device_list_for_node+0x5ce/0x880 core_tpg_add_node_to_devs+0x169/0x190 core_dev_add_lun+0x146/0x190 target_fabric_port_link+0xe9/0x1b0 configfs_symlink+0x381/0xae0 __x64_sys_symlink+0x55/0x80 The demo-mode login path that drives the ACL/dev-entry creation is reachable by an unauthenticated initiator; the colliding LUN add/remove is a local configfs operation. Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode automatic path, core_tpg_add_node_to_devs() -> core_enable_device_list_for_node(), was never given the equivalent guard, and the publish-after-populate ordering in core_tpg_check_initiator_node_acl() was left unchanged. Fix it in three cooperating parts: 1) Publish the dynamic NodeACL onto acl_node_list *before* creating its dev entries, so the teardown sweep can observe them. 2) Refuse to attach a dev entry to an se_lun that is shutting down, checked under nacl->lun_entry_mutex -- the same lock the sweep takes -- so once the sweep has passed an ACL any later enable for that LUN observes lun_shutdown and skips it. 3) In core_enable_device_list_for_node(), insert the new dev entry onto lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both the replace and the new-entry branch. Previously the entry was added to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only after dropping it; with the ACL now published early, the sweep could take the mutex in that gap, find the entry on the hlist, core_disable_device_list_for_node() it (list_del() on the not-yet- linked lun_link succeeds and the entry is freed), and then the enable would list_add_tail() the freed entry back onto lun_deve_list. Linking both lists under the mutex makes enable and the sweep mutually exclusive, closing that window. core_tpg_add_node_to_devs() already ignores the return value of core_enable_device_list_for_node(), so a shutting-down LUN is simply skipped.
CVE-2026-99773 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.0 High
In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind In [1], sashiko reported the following issue: === snip === Looking at how these fences are managed, drm_crtc_create_fence() creates a dma_fence without taking a reference to the drm_device or drm_crtc. Because the sync_file framework exposes this fence to userspace, the fence can outlive the CRTC. The dma_fence contract requires that data accessed by dma_fence_ops (like get_driver_name) must remain valid for an RCU grace period after the fence is signaled. However, drm_crtc_cleanup() and the subsequent freeing of the device do not wait for an RCU grace period via synchronize_rcu(). If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device hot-unplug: CPU1 (Userspace) sync_file_get_name() ops = rcu_dereference(fence->ops); if (!dma_fence_test_signaled_flag()) // Preempted or delayed here CPU2 (Driver Teardown) Signals the fence (setting fence->ops = NULL) Destroys and frees the CRTC without waiting for an RCU grace period CPU1 (Resumes) ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name() crtc = fence_to_crtc(fence); // Casts to the freed CRTC return crtc->dev->driver->name; // Use-after-free ... Does the CRTC or DRM device need to be kept alive for the RCU grace period, or should the fence hold a proper reference to prevent the use-after-free when get_driver_name() and get_timeline_name() access the freed CRTC structure? === snap === I believe this to be a correct observation and this patch implements the suggestion of waiting for an RCU grace period before proceeding with destruction of the drm_crtc, so that get_driver_name() and get_timeline_name() can still work.
CVE-2026-123866 1 Nodejs 1 Nodejs 2026-11-20 7.5 High
A use-after-free in Node.js HTTP/2 stream teardown can leak response memory, including the contents of other connections' response buffers, to a peer. When a stream is torn down while a write is still backpressured, for example by a peer `RST_STREAM` or by the server's own per-stream timeout destroying the stream, the stream's response buffer is freed but a reference to it is still used, so freed or unrelated heap memory is written to the socket instead of the intended response. On Node.js 26.x and 24.x the teardown can be driven purely by a remote peer once the window-size change from 26.9.0 and 24.22.0 is present, and on all supported lines the same defect is reachable through an application-initiated teardown such as a per-stream idle timeout. This vulnerability affects Node.js 26.x, 24.x, and 22.x.
CVE-2026-99690 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released.
CVE-2026-99320 1 Linux 2 Linux, Linux Kernel 2026-11-20 7 High
In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().
CVE-2026-99776 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: clear stale client pointer on close p9_usbg_close() tears down the client transport, but usb9pfs keeps using usb9pfs->client from asynchronous TX and RX completion handlers. A late completion can therefore dereference a client that has already been freed during mount teardown. Clear usb9pfs->client under usb9pfs->lock when closing the transport, detach any pending TX request from in_req->context, and make the TX/RX completion handlers bail out once the transport has been detached. This keeps late completions from touching a freed or rebound p9_client.
CVE-2026-99732 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ]
CVE-2026-99329 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research.
CVE-2026-99771 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL.
CVE-2026-99340 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Take SRCU in kvm_zap_gfn_range() kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to reschedule. Callers that do not already hold kvm->srcu (or slots_lock) can race with memslot deletion: synchronize_srcu_expedited() does not wait, kvm_free_memslot() frees the old slot and its rmap, and the zap resumes on freed memory. The VFIO noncoherent-DMA path hits this by zapping the entire GPA space without SRCU. KASAN reported: BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0 Read of size 8 at addr ffffc900005c1008 Call Trace: slot_rmap_walk_next+0x82/0x1c0 __kvm_rmap_zap_gfn_range+0x17a/0x280 kvm_zap_gfn_range+0x2a6/0x6a0 kvm_vfio_set_attr+0x576/0x770 kvm_device_ioctl+0x1ff/0x3b0 Take SRCU inside kvm_zap_gfn_range() so every caller is covered. Nesting with an existing kvm->srcu critical section is fine; the helper uses a local index. Drop the now-redundant SRCU pair from __kvm_set_or_clear_apicv_inhibit().
CVE-2026-99352 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: trace an accepted transport before publishing it svc_handle_xprt() publishes a newly accepted transport before tracing it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the peer has already closed the connection, that thread runs svc_delete_xprt(), which drops the list reference, the only reference the new transport holds. trace_svc_xprt_accept() then reads the transport's addresses and network namespace from freed memory. Before publication the accepting thread owns the transport exclusively: XPT_BUSY is still set from svc_xprt_init() and the transport is on no list. Emit the tracepoint there. [ cel: trace before publication instead of taking an extra reference ]
CVE-2026-99354 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin gss module across auth_domain RCU free A gss auth_domain stores a raw pointer to svcauthops_gss in dom->flavour, and its release queues svcauth_gss_domain_release_rcu() via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the module while a domain referencing it is reachable. rmmod auth_rpcgss can therefore unmap that text while an NFSD export still holds a reference to the domain. The export cache is one such holder. When the export is finally released, the domain reference drops from module text: svc_export_put() auth_domain_put(exp->ex_client) auth_domain_release() dom->flavour->domain_release(dom) /* into module text */ svcauth_gss_domain_release() call_rcu(&dom->rcu_head, svcauth_gss_domain_release_rcu) Once auth_rpcgss is unloaded, the domain_release call lands in unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not help: it waits only for callbacks already queued, and this one is not queued until the export goes away. NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a server built without CONFIG_NFSD_V4 can unload auth_rpcgss while exports still name a gss domain. Take a module reference in svcauth_gss_register_pseudoflavor() before publishing the domain and drop it at the end of svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the module image until this callback has returned. [ cel: rewrote description ]
CVE-2026-99367 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: NFSD: Don't complete a cld upcall the daemon has not read cld_pipe_downcall() matches a reply to its upcall on the xid alone. A write that arrives before the daemon has read that upcall completes __cld_pipe_upcall() while its struct rpc_pipe_msg is still queued on the pipe. The waiter returns, its stack frame goes away, and the pipe keeps a list_head that points into it. The next rpc_queue_upcall() walks that pointer: BUG: KASAN: vmalloc-out-of-bounds in __list_add_valid_or_report Read of size 8 at addr ffffc90007027950 by task syz.0.96/13066 __list_add_valid_or_report+0x6a/0x130 rpc_queue_upcall cld_pipe_upcall nfsd4_cld_grace_start nfsd4_cld_tracking_init The pipe is mode 0600 in rpc_pipefs, so the trigger is a broken or hostile nfsdcld rather than an unprivileged task. Record whether the daemon has consumed the whole message and complete only when it has. cld_pipe_destroy_msg() runs on every path by which the pipe releases a message, so it can maintain that flag under cn_lock. nfsdcld sends its -EINPROGRESS downcalls only after reading the upcall, so the new check does not break the GraceStart record stream.
CVE-2026-99717 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir() without validation, creating its debugfs directory at the debugfs root instead of under the client directory. If pmbus_init_debugfs() fails to create the client directory, data->debugfs is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir in the root of the debugfs filesystem and populates it with attribute files whose private data pointers reference psu->debugfs_entries. Because this root-level directory is outside the client debugfs hierarchy, PMBus core cleanup does not remove it on device unbind, leaking the debugfs entries and causing a use-after-free of the devm-allocated struct q54sj108a2_data if the orphaned files are accessed via q54sj108a2_debugfs_read() or q54sj108a2_debugfs_write() after device removal. Fix the problem by adding the missing NULL pointer check.