| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in the AMD ROCm Communication Collectives Library (RCCL) could allow a compromised peer rank or network-adjacent attacker to dereference an attacker-controlled pointer, potentially resulting in remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe->mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. |
| TP-Link Tapo
C500 v2.0 contains an out-of-bounds function-pointer dispatch in its TDP
(TP-Link Device Protocol) daemon. A single unauthenticated UDP datagram can
cause an invalid indirect call, crashing the main service and resulting in a
denial-of-service condition.
Successful
exploitation may allow an unauthenticated attacker with network access to the
affected UDP service to repeatedly crash the TDP daemon, disrupting normal
device operation and availability. No authentication, session establishment, or
pairing is required to trigger the condition. |
| A flaw was found in kube-compare. When processing a 'container://' reference path, the tool incorrectly executes an untrusted container image's entrypoint instead of merely extracting data from a stopped container. This allows a remote attacker to achieve arbitrary code execution on the operator's workstation. If the Docker daemon requires elevated privileges, the untrusted code may execute with root-mediated daemon privileges, posing a significant security risk. |
| Memory corruption when processing draw objects of incorrect type during graphics command list execution. |
| In handle_le_monitor_device_event of msft.cc, there is a possible control-flow hijack in the privileged bluetooth process due to an uninitialized pointer dereference. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| auto-changelog before 2.6.1 merges configuration from inside the target repository (the .auto-changelog file and the auto-changelog key in package.json) into its options, and honors security-sensitive options from that untrusted source. The handlebarsSetup option is passed to require(), so running auto-changelog over attacker-controlled repository content (for example, in a CI workflow that checks out an untrusted pull request head, or locally on a forked or third-party repository) executes attacker-chosen code with the privileges of the invoking user or CI job, including access to workflow secrets, without the repository dependencies ever being installed. The plugins option similarly loads attacker-controlled modules from the repository. Under the same conditions, appendGitLog/appendGitTag allow git argument injection (e.g. --output= to write arbitrary files), output allows writing attacker-influenced content to arbitrary paths, and template causes an outbound request to an attacker-chosen URL. Version 2.6.1 treats in-repository configuration as untrusted and refuses to run when it sets these options, unless the new --unsafe-config flag is passed. |
| A flaw was found in SSSD. A use-after-free vulnerability exists in the Kerberos Credential Manager (KCM) responder during Kerberos ticket-granting ticket (TGT) renewal, where a deferred callback accesses memory that has already been released. An authenticated local user with a renewable Kerberos ticket can trigger this issue on systems configured with KCM renewal, causing the KCM responder service to crash and resulting in a Denial of Service (DoS). |
| A flaw was found in SSSD. A local user can cause a denial of service (DoS) by disrupting system authentication services. When handling Generic Security Services Application Programming Interface (GSSAPI) authentication in the Pluggable Authentication Module (PAM) responder, cached connection state is freed upon completion without clearing the reference pointer. An attacker can exploit this by sending an additional request over the same connection, causing the service to access invalid memory and unexpectedly terminate. |
| DigitalCanion SA has discovered a vulnerability that allows remote attackers to execute arbitrary code on affected installations of the product. Authentication may be required to exploit this vulnerability.
The specific flaw exists within the Configuration → Services → Music on Hold functionality of the web portal listening on TCP port 443. The application is intended to allow users to upload WAV audio files but fails to properly validate the uploaded file type. An attacker can exploit this behavior to upload a malicious shared object (.so) instead of a WAV file. When the uploaded file is subsequently processed by the affected component, attacker-controlled code is loaded and executed in the context of the affected process. This can result in remote code execution and potentially full compromise of the underlying Linux system. |
| LibreOffice Calc can link a cell range to an external data source, and the link is saved in the document. A document could name a Java database driver for such a link to be loaded from a remote location, so opening the document could run Java code from that location. In fixed versions an entry in a Java class path has to be a file URL. |
| Ghost is a Node.js content management system. From 6.10.3 until 6.64.0, a vulnerability in how Ghost loads theme translation files allowed an authenticated Administrator to execute arbitrary code on the server via a crafted theme. This issue is fixed in version 6.64.0. |
| A code injection vulnerability in WatchGuard Fireware OS's BOVPN Over TLS client configuration handling allows an attacker who controls the remote VPN server to execute arbitrary commands as root on the connecting Firebox. |
| Vim is an open source, command line text editor. Prior to 9.2.0847, runtime/autoload/vimball.vim allows a crafted vimball member named .VimballRecord to overwrite the installation record with attacker-chosen commands. When vimball#RmVimball() later processes the matching record entry, the stored Ex commands, including operating-system commands invoked through :!, execute with the privileges of the user running Vim. This issue is fixed in version 9.2.0847. |
| In ConvertX before 0.19.0, converters/calibre.ts does not block recipe files, and instead passes them to the ebook-convert program from Calibre. This affects executable code in a .recipe or .downloaded_recipe file. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.27.0 until 2.131.0, Docling plugin factories in docling/models/factories/base_factory.py call load_setuptools_entrypoints() before applying the allow_external_plugins setting, so every module registered in the Docling entry-point group is imported even when external plugins are disabled. An installed third-party or compromised package can therefore execute import-time code when Docling starts, while the subsequent namespace filter misleadingly reports that the plugin was not loaded. This issue is fixed in 2.131.0. |
| Use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Use-after-free in the Networking component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
