Search
Search Results (16 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99797 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: drop sqd->lock while SQPOLL waits An exiting SQPOLL thread calls io_uring_cancel_generic() with sqd->lock held, and keeps it across cond_resched() and the sleep until nothing is in flight anymore. A zero-copy send notification can't be canceled and stays pending as long as the peer doesn't read, so the lock is held for as long as a user cares to. io_ring_exit_work() needs it to park the thread, and so do IORING_REGISTER_IOWQ_AFF and IOWQ_MAX_WORKERS. With 64 such rings sharing the thread, every iou_exit slot sleeps on the lock and no ring gets freed for anyone. Drop the lock around cond_resched() and the sleep, like the main loop of the thread does. Each walk of ctx_list is still under one hold, and nothing is kept across the unlock. The thread drops its io-wq, frees its tctx and clears sqd->thread under one hold after the loop, so whoever holds the lock and finds sqd->thread set can still use them. [axboe: adapted to the schedule_timeout() based loop] | ||||
| CVE-2026-99359 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: validate transport name in listener_set before serv creation nfsd_nl_listener_set_doit() holds nfsd_mutex for the whole listener teardown and rebuild. The code checks NFSD_A_SOCK_TRANSPORT_NAME for presence only, and not for content. An arbitrary name therefore reaches svc_xprt_create_from_sa(). There, a name that matches no registered class calls request_module("svc%s", name). That call is a TASK_KILLABLE usermode helper upcall, and it runs under nfsd_mutex. Check the name against the classes that NFSD can create: tcp, udp and rdma. The check goes in nfsd_nl_validate_listeners(), which runs before the code takes nfsd_mutex. The rejection names the offending attribute through extack, since -EPROTONOSUPPORT on its own does not say which entry carried the bad name. This narrows the upcall. It does not remove it. NFSD accepts "rdma" without a condition, so on a kernel that does not build svcrdma the name still reaches request_module("svcrdma") under nfsd_mutex. That is necessary for the modular case, where the autoload is legitimate. | ||||
| CVE-2026-99671 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch. | ||||
| CVE-2026-112907 | 1 Tox-dev | 1 Filelock | 2026-11-10 | 2.5 Low |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, soft lock classes on Windows read an existing marker with _read_lock_file and remove a stale marker through break_lock_file using pathname operations that wait for an oplock break. Another local account with read access to an unheld marker can keep a Level 1 or batch oplock unanswered, causing SoftFileLock.acquire and related async or fallback locks to wait beyond timeout, blocking=False, and cancel_check. A stale marker under the oplock cannot be broken, but mutual exclusion remains intact and no file other than the marker is accessed. This issue is fixed in version 4.2.1. | ||||
| CVE-2026-112913 | 1 Tox-dev | 1 Filelock | 2026-11-06 | 3.3 Low |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.2.1, ReadWriteLock and AsyncReadWriteLock on Windows use _connect to attach SQLite to the lock database by pathname, allowing another local account that can create adjacent names to place a database-wal or database-journal side file before acquisition. An undeletable WAL file makes each read or write acquisition fail immediately with sqlite3.OperationalError regardless of timeout. Separately, when the database contains at least one table, a hot journal that grants the lock account modify rights can cause SQLite recovery to delete a file named by that journal only when the lock account has permission to delete the target. The issue requires a directory writable by another account, such as a shared Windows temporary directory, and does not affect private directories. This issue is fixed in version 4.2.1. | ||||
| CVE-2026-112911 | 1 Tox-dev | 1 Filelock | 2026-10-28 | 6.3 Medium |
| filelock is a platform-independent file lock for Python. From 3.30.0 until 4.2.1, StrictSoftFileLock versions from 3.30.0 and SoftReadWriteLock versions from 4.0.0 can adopt a protocol directory created first by another local user in a shared parent directory, allowing that user to alter protocol state and admit concurrent holders. This issue is fixed in version 4.2.1. | ||||
| CVE-2026-99084 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock. | ||||
| CVE-2026-82312 | 1 Openvpn | 1 Openvpn | 2026-09-08 | 5.5 Medium |
| OpenVPN 2.0.0 through 2.6.22 and 2.7_alpha1 through 2.7.6 on Windows allows local authenticated users to cause a denial of service via a NULL DACL on named IPC objects | ||||
| CVE-2026-64111 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. | ||||
| CVE-2026-62426 | 1 Xen | 1 Xen | 2026-07-28 | 8.8 High |
| [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To manage the system, sysctl and platform operations are used by the control domain or a possible Xenstore domain. Some of these operations may not be executed in parallel, so a system-wide lock each is used. The way those locks are acquired is, however, not providing any fairness. Furthermore, with XSM/Flask in use, the lock acquire will, for some operations, occur ahead of any permission checking. The sysctl issue is CVE-2026-62426. The platform-op issue is CVE-2026-62427. | ||||
| CVE-2019-18269 | 1 Omron | 2 Plc Cj Firmware, Plc Cs Firmware | 2026-06-02 | 8.6 High |
| Omron’s CS and CJ series PLCs have an unrestricted externally accessible lock vulnerability. | ||||
| CVE-2026-25612 | 1 Mongodb | 1 Mongodb | 2026-04-17 | 6.5 Medium |
| The internal locking mechanism of the MongoDB server uses an internal encoding of the resources in order to choose what lock to take. Collections may inadvertently collide with one another in this representation causing unavailability between them due to conflicting locks. | ||||
| CVE-2025-58436 | 2 Linux, Openprinting | 2 Linux, Cups | 2025-12-04 | 5.1 Medium |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to version 2.4.15, a client that connects to cupsd but sends slow messages, e.g. only one byte per second, delays cupsd as a whole, such that it becomes unusable by other clients. This issue has been patched in version 2.4.15. | ||||
| CVE-2023-22318 | 1 Tribe29 | 1 Checkmk Appliance Firmware | 2025-01-23 | 7.5 High |
| Denial of service in Webconf in Tribe29 Checkmk Appliance before 1.6.5. | ||||
| CVE-2023-38505 | 1 Dietpi-dashboard Project | 1 Dietpi-dashboard | 2024-11-21 | 7.5 High |
| DietPi-Dashboard is a web dashboard for the operating system DietPi. The dashboard only allows for one TLS handshake to be in process at a given moment. Once a TCP connection is established in HTTPS mode, it will assume that it should be waiting for a handshake, and will stay this way indefinitely until a handshake starts or some error occurs. In version 0.6.1, this can be exploited by simply not starting the handshake, preventing any other TLS handshakes from getting through. An attacker can lock the dashboard in a state where it is waiting for a TLS handshake from the attacker, who won't provide it. This prevents any legitimate traffic from getting to the dashboard, and can last indefinitely. Version 0.6.2 has a patch for this issue. As a workaround, do not use HTTPS mode on the open internet where anyone can connect. Instead, put a reverse proxy in front of the dashboard, and have it handle any HTTPS connections. | ||||
| CVE-2019-11485 | 2 Apport Project, Canonical | 2 Apport, Ubuntu Linux | 2024-11-21 | 3.3 Low |
| Sander Bos discovered Apport's lock file was in a world-writable directory which allowed all users to prevent crash handling. | ||||
Page 1 of 1.