| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: always report inode repair setup failures
LOLLM noticed that xchk_setup_inode silently discards errors being
returned by xrep_setup_inode. Fix that, and fix the stub macro so that
it actually "returns" a value. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: abort dirtree repair if the live update hook dies
LOLLM notices that if the live update hook for the directory tree repair
code hits an error, it will set dl->aborted and stops working. If the
repair code ever sees that condition, it ought to bail out immediately
instead of continuing with obsolete data. |
| The device only supports Wi-Fi protocols vulnerable to
deauthentication attacks (WEP/WPA/WPA2). Should any event which would typically
be logged to the user’s mobile device (such as arming or disarming the alarm or
any tamper events) be incurred whilst the device is temporarily disconnected
from its Wi-Fi network (such as via a deauthentication attack), those alerts
will not be sent even after connection is regained. |
| PolicyPress is a compliance policy management tool for small and mid-size teams. Prior to version 1.4.1, sensitive content is disclosed via CSS-only web redaction and insecure starter workflow defaults. This issue has been patched in version 1.4.1. |
| Detection of error condition without action in the MigTD's vmcall_raw transport for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable data corruption. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper handling of a failed memory remap in Firecracker versions 0.23.0 through 1.16.1 might allow a guest user with root privileges to read or modify Firecracker VMM process memory via balloon or virtio-mem discard requests on microVMs restored from a snapshot with the File memory backend, if the host fails to create the replacement mapping.
To remediate this issue, users should upgrade to Firecracker 1.16.2 or 1.17.0 and later. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path
In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.
Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
nft_flow_block_chain()
nft_chain_offload_cmd()
nft_block_offload_cmd()
->ndo_setup_tc()
nsim_setup_tc()
flow_block_cb_setup_simple()
flow_block_cb_alloc() // fails to -ENOMEM
The warning was reproduced on the 5.10 stable kernel under memory pressure
via fault injection, but the underlying bug exists in mainline as well,
as demonstrated by the ENOMEM trace above. The following splat was
triggered during nf_tables transaction processing:
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Modules linked in:
CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Call Trace:
nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604
nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline]
nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340
netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x155/0x190 net/socket.c:663
____sys_sendmsg+0x705/0x870 net/socket.c:2379
___sys_sendmsg+0x100/0x170 net/socket.c:2433
__sys_sendmsg+0xe9/0x1c0 net/socket.c:2462
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that
warnings are only emitted for unexpected errors. This aligns with the
common kernel practice of not warning on -ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reset write verifier on deferred writeback errors
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that failed
writeback. This violates the UNSTABLE+COMMIT durability contract
(RFC 1813 §3.3.7, RFC 8881 §18.32).
Add commit_reset_write_verifier() calls at both filemap_check_wb_err()
error sites, matching the pattern used by adjacent error paths in the
same functions. The helper already filters -EAGAIN and -ESTALE
internally, so the calls are unconditionally safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/conexant: Fix missing error check for jack detection
In cx_probe(), the return value of snd_hda_jack_detect_enable_callback()
is ignored. This function returns a pointer, and if it fails (e.g., due
to memory allocation failure), it returns an error pointer which must
be checked using IS_ERR().
If the registration fails, the driver continues to probe, but the jack
detection callback will not be registered. This can lead to a kernel
crash later when the driver attempts to handle jack events or accesses
the uninitialized structure.
Check the return value using IS_ERR() and propagate the error via
PTR_ERR() to the probe caller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: Fix error pointer dereference
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR() |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0
INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to
properly inject #UD when EFER.SVME=0.
[sean: tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6. |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. |
| Memory corruption may occur while processing IOCTL call for DMM/WARPNCC CONFIG request. |