Search Results (336 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-134359 1 Azuracast 1 Azuracast 2026-11-21 8.8 High
AzuraCast before 0.24.1 fails to escape backslashes in Liquidsoap annotation values, allowing media managers to break out of quoted annotation strings. Attackers can set a crafted ID3 title ending in a backslash to inject a process: protocol URI, achieving OS command execution in the Liquidsoap container during playback.
CVE-2026-132895 1 Jetbrains 1 Teamcity 2026-11-21 7.5 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 remote code execution was possible via Subversion VCS root settings
CVE-2026-133017 1 Jetbrains 1 Teamcity 2026-11-21 8 High
In JetBrains TeamCity before 2026.2.1, 2026.1.5 remote code execution was possible via Git VCS root settings
CVE-2026-133198 1 Jetbrains 1 Junie 2026-11-21 7.8 High
In JetBrains Junie before 252.819.35, 253.819.35 code execution was possible via terminal environment settings in project files
CVE-2026-129935 1 Mongodb 1 Go Driver 2026-11-21 3.7 Low
The MongoDB Go Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129923 1 Mongodb 1 Rust Driver 2026-11-21 3.7 Low
The MongoDB Rust Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129926 1 Mongodb 1 Python Driver 2026-11-21 3.7 Low
The MongoDB Python Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129933 1 Mongodb 1 Java Driver 2026-11-21 3.7 Low
The MongoDB Java Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129929 1 Mongodb 1 Node.js Driver 2026-11-21 3.7 Low
The MongoDB Node.js Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129925 1 Mongodb 1 Ruby Driver 2026-11-21 3.7 Low
The MongoDB Ruby Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-129937 1 Mongodb 1 C# Driver 2026-11-21 3.7 Low
The MongoDB C# Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.
CVE-2026-131305 1 Splunk 1 Splunk Ai Assistant 2026-11-20 8.1 High
In Splunk AI Assistant versions below 2.0.0, a user who does not hold the "admin" or "power" Splunk roles could submit client-controlled feature settings through the Representational State Transfer (REST) API. This could modify limited response metadata outside the expected server-side configuration. The vulnerability is possible because the REST API processes client-supplied feature settings without enforcing the expected server-side configuration boundary.
CVE-2026-99640 1 Linux 2 Linux, Linux Kernel 2026-11-20 2.5 Low
In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags]
CVE-2026-82584 1 Ash-project 1 Igniter 2026-11-19 N/A
Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in ash-project igniter allows a malicious package publisher to forge the mix igniter.install confirmation prompt. mix igniter.install prints a confirmation panel (an anti-typosquatting safeguard) listing a package's hex metadata before adding it. The panel builder in Igniter.Project.Deps wrote publisher-controlled fields (meta.description, owner usernames, requirement names, version) to the terminal with only newlines stripped. A malicious or typosquatted package can embed ANSI terminal escape sequences (cursor movement, line erase, carriage returns) in its metadata to overwrite the panel, forging trusted author names and download counts while concealing the real ones, so a developer relying on the panel to vet the package is deceived into approving a malicious dependency. This issue affects igniter: from 0.8.1 before 0.8.4.
CVE-2026-82710 1 Ash-project 1 Usage Rules 2026-11-19 N/A
Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in ash-project usage_rules allows a malicious package publisher to inject terminal control sequences into the output of mix usage_rules.search_docs. mix usage_rules.search_docs searches Hex documentation through search.hexdocs.pm, which indexes the documentation of every published package, and prints the matching results (title, package, type, doc reference, and highlighted snippets) to the terminal. The formatter in Mix.Tasks.UsageRules.SearchDocs interpolated those publisher-controlled fields verbatim, neutralizing no terminal control characters; the only transform it applied adds escape sequences rather than removing them. A malicious package can embed ANSI terminal escape sequences (cursor movement, line erase, carriage returns, OSC 52 clipboard writes) in its indexed documentation, so when a developer runs a search that surfaces those docs the sequences reach the terminal unchanged — forging the displayed hexdocs URL or a suggested command, hiding text, or writing to the clipboard. No authentication or privileged position is required; only publishing a package. This issue affects usage_rules: from 0.1.18 before 1.2.8.
CVE-2026-132122 1 Splx-ai 1 Agentic-radar 2026-11-19 4.7 Medium
agentic-radar 0.7.0 before 0.14.2 contains an untrusted configuration loading vulnerability that allows malicious repositories to inject environment variables by having load_dotenv() in agentic_radar/cli.py load the scanned repository's .env file. Attackers can set OPENAI_BASE_URL to an attacker-controlled host so that scan openai-agents or --harden-prompts send requests carrying the user's OpenAI API key to the attacker.
CVE-2026-18553 1 Mattermost 1 Mattermost 2026-11-19 4.8 Medium
Mattermost versions 11.11.x <= 11.11.0, 11.7.x <= 11.7.11, 11.10.x <= 11.10.2 fail to sanitize terminal escape sequences when rendering server logs via {{mmctl logs}}, which allows an unauthenticated attacker to hijack a system administrator's clipboard or spoof terminal output via a crafted HTTP request whose logged content is later viewed with {{mmctl logs}}. Mattermost Advisory ID: MMSA-2026-00753
CVE-2026-129512 1 Apache 1 Log4net 2026-11-19 5.3 Medium
Improper Neutralization of Null Byte or NUL Character vulnerability in the AdoNetAppender of Apache log4net. Text parameters were bound unchanged, so a NUL character or an unpaired UTF-16 surrogate reached the database as it was. A database that refuses such a value, such as PostgreSQL, rejected the insert and the event was lost; only the first such loss per appender was reported. A party whose data reaches a log message could suppress that event. This issue affects Apache log4net: from 1.2.9 before 3.6.0. Users are recommended to upgrade to version 3.6.0, which fixes the issue.
CVE-2026-130747 1 Getgrav 1 Grav 2026-11-19 8.1 High
Grav before 1.7.53.7 and 2.x before 2.2.18 contains an authentication bypass vulnerability that allows anonymous visitors to create super-admin accounts because UserCollection::count() uses an unescaped glob() pattern. On installs whose path contains brackets or a backslash, the account count returns zero, so attackers can send requests to POST /api/v1/auth/setup or the classic admin registration form to create or overwrite administrator accounts.
CVE-2026-65963 1 Pi-hole 1 Ftl 2026-11-19 7.2 High
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. From 6.6.2 until 6.7, PATCH /api/config accepts unfiltered CivetWeb lua_* options through webserver.advancedOpts, while POST /api/teleporter writes attacker-controlled content from a dhcp.leases archive entry through src/zip/teleporter.c without content validation. An authenticated administrator can place controlled file content on disk, point a Lua execution option at that file, and rely on the advancedOpts configuration change to restart FTL. CivetWeb then executes the file as Lua through the processing in src/webserver/webserver.c, allowing arbitrary commands to run as the pihole operating-system user and persist across restarts while the configuration and file remain. This issue is fixed in version 6.7.