| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: hold vduse_lock across IDR lookup in open path
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields on map value recycle
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its
too-short range validation only checks sb->s_blocksize.
On filesystems with a cluster size larger than the block size, a FITRIM
range that is at least one block but shorter than one cluster is accepted
and shifted down to len == 0. The later start + len - 1 and len -= ...
arithmetic then underflows and can drive trimming past the requested
range.
Reject ranges shorter than s_clustersize instead. That preserves the
existing -EINVAL behavior for requests that cannot discard even one
allocation unit and keeps zero-cluster trims out of the group walk. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the inode immediately,
while another task is still walking the path in RCU mode and reads
inode->i_opflags (offset +2) inside current_time() -> is_mgtime().
KASAN reports:
BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313
Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags)
The rules (per Al Viro):
->destroy_inode() called immediately, can sleep, use for blocking
cleanup e.g. bpf_any_put()
->free_inode() called after RCU grace period, use for freeing
inode and anything RCU-accessible e.g. i_link
Fix: split the two concerns properly:
- keep bpf_any_put() in bpf_destroy_inode() since it is blocking
and needs to run promptly
- introduce bpf_free_inode() to handle kfree(i_link) and
free_inode_nonrcu() with proper RCU delay, preventing the UAF |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.
Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:
BUG: unable to handle page fault for address: ffff889101603d38
RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme]
Call Trace:
nvme_init_hctx+0x10/0x20 [nvme]
nvme_alloc_ns+0x9e/0xa10 [nvme_core]
nvme_scan_ns+0x301/0x3b0 [nvme_core]
nvme_scan_ns_async+0x23/0x30 [nvme_core]
Switch the parameter to int and fall back to node 0 when it is
NUMA_NO_NODE; node 0 is always present. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Adjust size for copy_to_user()
The amount of data returned to user space should be limited by the buffer
size provided by the application. If the buffer is smaller than the data
size, return only the portion that fits instead of failing. |
| An issue in Halo 2.25.4 allows a remote attacker to execute arbitrary code via the run.halo.app.migration.impl.MigrationServiceImpl.restoreWorkdir(), and org.springframework.util.FileSystemUtils.copyRecursively() components |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| An issue in Open5GS v.2.7.0 allows a remote attacker to cause a denial of service via the ngap_send_to_nas() function in src/amf/ngap-path.c |
| CSV export functionality in Brainstorm Force SureForms version, <= 2.12.1, fails to neutralize spreadsheet formula characters in user-controlled form field names before generating CSV exports, which allows a remote attacker to execute spreadsheet formulas on an administrator's workstation when the exported CSV file is opened in a vulnerable spreadsheet application. |
| Combodo iTop is a web based IT service management tool. Prior to 3.2.3, 3.2.3, there is a Reflected Cross-Site Scripting (XSS) vulnerability in pages/tagadmin.php. This issue has been fixed in version 3.2.3. |
| Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there is a Reflected Cross-Site Scripting (XSS) vulnerability in the universal search. This issue has been fixed in version 3.2.3. |
| A security flaw has been discovered in TRENDnet TEW-755AP up to 20260702. This affects the function log_email_server of the file /cgi-bin/email.cgi of the component ssi. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was determined in TRENDnet TEW-821DAP 2.2.01b05. Affected is the function popen/system of the file /cgi-bin/ping.cgi of the component ssi. Executing a manipulation of the argument ipaddr can lead to command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability has been found in SourceCodester Simple Online Food Ordering System 1.0. This affects an unknown function of the file /admin/ajax.php?action=save_menu. The manipulation of the argument ID leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Checkmate is an open-source, self-hosted tool designed to track and monitor server hardware, uptime, response times, and incidents in real-time with beautiful visualizations. From 3.3.0 until 3.9.2, enabling the global showURL setting causes the unauthenticated GET /api/v1/status-page/:url endpoint to return complete monitor objects from server/src/controllers/statusPageController.ts. The response includes the secret field used by HttpProvider.ts as an HTTP Authorization credential, even though BaseStatusPage.tsx does not display that value, allowing visitors to extract credentials from the JSON response and use them against monitored services. This issue is fixed in version 3.9.2. |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.27.2, the join filter in src/filters/array.ts computes complexity from array.length and separator length instead of the total string length produced by array.join(sep). The concat filter can cheaply double arrays of references, after which join materializes the referenced content while charging only for element count, allowing a template to exceed a configured memoryLimit by a large factor. The sibling array_to_sentence_string filter in src/filters/string.ts has the same accounting defect, and a crafted template can allocate toward V8's string or process memory limit and crash the process. This issue is fixed in version 10.27.2. |
