| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: sur40 - fix input device registration ordering
In sur40_probe(), input_register_device() was previously called early before
the V4L2 video device and vb2_queue components were fully initialized. If
userspace opened the input device immediately upon registration, sur40_open()
would trigger and start the sur40_poll() worker thread. This worker thread
invokes sur40_process_video() and accesses the uninitialized vb2_queue
structure, leading to a data race and potential system crash.
Furthermore, if V4L2 or video registration failed after input_register_device()
succeeded, the error path fell through to calling input_free_device() on a
successfully registered device instead of input_unregister_device(), corrupting
input core state.
Move input_register_device() to the very end of sur40_probe(). This ensures
the V4L2 and video queue structures are fully initialized before polling can
start, and naturally resolves the error path bug since input_free_device()
is now only called when input registration has not yet occurred.
To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move
input_unregister_device() to the very beginning of sur40_disconnect(). This
guarantees that the input polling worker thread is stopped before V4L2
video components or control handlers are unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| Subscriber Sensitive Data Exposure in SureFeedback Client Site <= 1.2.12 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: k3: set hdma clock as critical
HDMA clock is responsible for the internal TCM access path of X100 RISC-V
core, so set the clock flag as critical to prevent it from being shut off,
otherwise the Linux system will hang, for example in the case of a vector
instruction access generates a page fault. |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, MELSEC iQ-F Series FX5-ENET/IP Ethernet Module, and MELSEC iQ-R Series CPU module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: propagate errors from xfs_rtginode_load
xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than
-ENOENT as success. This can leave the realtime group inode unset after an
I/O, allocation, or corruption error. Growfs then continues as though the
inode had been loaded.
Only -ENOENT means that the inode needs to be created. Return all other
errors to the growfs caller. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix off-by-one in rtrefcount btree root level validation
xfs_rtrefcountbt_compute_maxlevels() sets
mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1;
where the trailing "+ 1" already accounts for the inode-root level, so the
deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must
satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels).
The two on-disk validation paths, xfs_rtrefcountbt_verify() and
xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a
crafted rtreflink (metadir + realtime + reflink) image whose
/rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on
mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1,
exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is
sized for exactly bc_maxlevels entries, the first btree op on such a cursor
indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is
reached by the first rtrefcount cursor built after mount, via log/CoW
recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an
FS_IOC_GETFSMAP over the realtime device.
Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form
already used by the sibling data-device refcount/rmap verifiers and the
in-memory rtrmap verifier.
BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
Write of size 2 at addr ffff888018391658 by task exploit/144
xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308)
xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113)
xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085)
xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551)
xfs_mountfs (fs/xfs/xfs_mount.c:1158)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1940)
get_tree_bdev_flags (fs/super.c:1634)
vfs_get_tree (fs/super.c:1694)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216
The buggy address is located 8 bytes to the right of
allocated 216-byte region [ffff888018391578, ffff888018391650)
Kernel panic - not syncing: Fatal exception |
| Integer overflow in Chromecast in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Missing authorization in CustomTabs in Google Chrome on on Android prior to 152.0.7977.65 allowed a local attacker to potentially execute arbitrary code outside the sandbox via a co-installed app. (Chromium security severity: Medium) |
| Type confusion in V8 in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Incorrect authorization in Sandbox in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Buffer overflow in Blink in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Type confusion in Animation in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Improper input validation in Chromecast in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Improper input validation in Printing in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in GPU in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Memory corruption in Tint in Google Chrome on on Mac prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Race condition in Start in Google Chrome on on Android prior to 152.0.7977.65 allowed a local attacker leveraging social engineering to potentially execute arbitrary code outside the sandbox via a co-installed app. (Chromium security severity: Medium) |
