| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: reject too-small tag 70 packets
ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the
parsed packet body size to derive the encrypted filename size. A
malformed packet with a body smaller than those fixed fields can underflow
that size calculation.
Reject tag 70 packets before the subtraction unless the body contains the
signature, cipher code, and at least one byte of encrypted filename data. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: release message context on send failure
ecryptfs_send_message_locked() moves a message context from the free
list to the allocated list before sending the request to the userspace
daemon.
If ecryptfs_send_miscdev() fails, the context is left on the
allocated list and cannot be reused. Move it back to the free list on
failure and clear the caller's pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: panel-dsi-cm: initialize lock before registering display
dsicm_probe() registers the display before initializing ddata->lock.
Once omapdss_register_display() publishes the display, another consumer
can reach a dsicm callback that takes this mutex while it is still
uninitialized.
Initialize the mutex before registering the display so the published
callbacks always see a valid lock. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: unregister connector callback on init failure
uvesafb_init() registers the v86d connector callback before registering
the platform driver. If platform_driver_register() fails, the function
returns the error directly and leaves the connector callback registered.
The later platform-device failure path already unregisters the callback.
Add the same cleanup before the final return when platform-driver
registration fails.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix off-by-one when saving/restoring non-PCI config space
nv_suspend() and nv_resume() walk the non-PCI configuration space with
for (i = 0; i <= np->register_size/sizeof(u32); i++)
which runs one iteration too many. saved_config_space is declared as
u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3
device register_size/sizeof(u32) is exactly the array length and the last
iteration addresses one element past the end.
The element it lands on is np->name_rx[0..3]: saved_config_space[] is
followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no
padding. Nothing observable is corrupted by that, because nv_request_irq()
rewrites name_rx with sprintf() before it is ever passed to request_irq().
The bug is the out-of-bounds access itself, which UBSAN reports and which
CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code,
plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one
dword past the range the driver mapped:
np->base = ioremap(addr, np->register_size);
VER1 and VER2 devices stay inside the array, but they too get the stray
read and the stray write one dword past their own window.
Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle.
The splat below is trimmed: the build path in the file name, the CPU
and taint lines, the Workqueue line, the "?" hint frames, and the
frames below device_suspend are all cut. The kernel was tainted, with
an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the
stock module.
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25
index 385 is out of range for type 'u32 [385]'
Call Trace:
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x54/0x59
__this_module+0xe398c/0xe9010 [forcedeth]
pci_pm_suspend+0x80/0x170
dpm_run_callback+0x51/0x160
device_suspend+0x1a2/0x4a0
...
Both loops are hit. UBSAN reports each source location only once per module
load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does
test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the
two splats land in the first S3 cycle after the module is loaded and later
cycles are silent even though the access still runs off the end every time.
In that first cycle line 6225 is reported from pci_pm_suspend and line 6240
from pci_pm_resume.
The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f
("forcedeth: fix buffer overflow") in 2012; these two loops were missed.
The suspend and resume side was reported on LKML in September 2013 by Marc
Weber, with the same analysis and the same one-character fix, but the patch
was attached rather than sent inline and the thread ended there.
Use < instead of <=, which saves and restores exactly register_size bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device
The OMAP SSI driver uses a synthetic HSI controller device allocated via
hsi_alloc_controller(), which does not go through the normal OF/platform
device initialization path.
As a result, the embedded struct device does not have a DMA mask
initialized by default.
After recent DMA API hardening changes, dma_map_sg() and related helpers
now require a valid dma_mask to be present, otherwise the driver may
crash or trigger warnings when attempting DMA mapping operations.
Fix this by explicitly initializing the DMA mask for the SSI controller
device and setting a 32-bit DMA mask, which matches the hardware
capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlb: only adjust reservation during unmapping if mapcount is 0
Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In
the case of folio mapped in both a parent and a child, if the parent
unmaps the range first, the reservation adjustment will result in an
underflow of the reserved count. Once the child unmaps the range, the
count is restored. Change __unmap_hugepage_range() to check the mapcount
before adjusting the reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru_update_cap_info is stack-allocated in pfru_ioctl().
Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports
are generated when a DSM returns 64-byte buffers, with writes reaching
44 bytes past the end of cap_hdr's [64, 156) frame window into
adjacent stack redzones.
Introduce a helper pointer to out_obj->package.elements and use it
to validate each buffer length against its destination field size
before copying, returning -EINVAL if the firmware supplies an
oversized buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix OOB read in eir_get_service_data()
eir_get_service_data() walks the advertising data for a Service Data
field with a matching UUID. On a mismatch it advances:
eir += dlen;
eir_len -= dlen;
eir_get_data() reports dlen as the field's data length, but the field
spans dlen + 2 bytes once its length and type bytes count, and more
when non-Service-Data fields were skipped to reach it. The pointer
lands correctly on the next field. eir_len does not, and the shortfall
compounds across fields until eir_get_data() reads the length and type
bytes of a "field" past the end of the buffer.
For an ISO broadcast sink that buffer is hcon->le_per_adv_data[], filled
from the periodic advertising reports of a remote broadcaster. A PA
payload packed with mismatching Service Data fields walks off the array
into the rest of struct hci_conn. A drifted field that matches the BAA
UUID puts those bytes in iso_pi(sk)->base, where user space reads them
back with getsockopt(BT_ISO_BASE).
Recompute eir_len from the end of the buffer each iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Harden bloom filter sizing and indexing on 32-bit kernels
bloom_map_alloc() has two 32-bit-specific problems when the computed
bitmap reaches the U32_MAX fallback case.
First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The
addition performed by DIV_ROUND_UP wraps, so the map allocates only the
fixed-size bloom filter object while keeping bitset_mask == U32_MAX.
Subsequent updates can then write past the allocated object.
Second, fixing only the allocation size is not sufficient. The bloom hash
is a u32, but set_bit() takes a signed long bit number and x86 test_bit()
eventually feeds the index to variable_test_bit(long, ...). On 32-bit
kernels, hashes in [0x80000000, U32_MAX] therefore become negative bit
offsets. x86 bt/bts with a memory operand interpret those offsets relative
to the supplied base, so a map with bitset_mask == U32_MAX can read or
write before bloom->bitset even after allocating the full 512 MiB bitmap.
Keep the U32_MAX fallback, but split each hash into a word pointer and an
in-word bit number before calling test_bit() or set_bit(). The bitops
argument is then always in [0, BITS_PER_LONG - 1], while BIT_WORD(h) still
selects the intended word in the full bitmap.
Compute the bitset size from (u64)bitset_mask + 1 before passing the final
size to bpf_map_area_alloc(). This fixes the original under-allocation and
keeps the allocated storage consistent with the addressable bitset.
Exploitation note: local privilege escalation is possible on a 32-bit x86
kernel using the under-allocation bug from a binary with CAP_BPF. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Check svc pool percpu counter allocation
__svc_create() initializes three per-pool percpu_counter stats and
ignores every return value. On SMP, percpu_counter_init() fails when
__alloc_percpu_gfp() cannot satisfy the allocation, leaving the failed
counter with fbc->counters == NULL and its embedded raw_spinlock_t,
list_head, and count never initialized. __svc_create() returns the
half-constructed svc_serv to nfsd, lockd, or the NFS callback service
anyway.
Once that service is live, the hot-path increments in
svc_xprt_enqueue(), svc_handle_xprt(), and
svc_pool_wake_idle_thread() reach a counter whose backing pointer is
NULL. The pointer is a per-cpu offset, so the access does not fault:
it resolves to offset zero of the current CPU's per-cpu area and
silently corrupts whatever variable lives there. A
/proc/fs/nfsd/pool_stats read walks the same NULL per-cpu storage and
returns garbage, and on CONFIG_DEBUG_SPINLOCK or lockdep it splats on
the never-initialized lock.
Creating the broken service requires a percpu allocation failure during
RPC server startup, so it is reachable only by a local administrator
under memory pressure or fault injection; a remote peer cannot induce
the bad state on its own.
Check each percpu_counter_init() return value in __svc_create() and
fail when an allocation fails, unwinding the counters already set up
in the current pool and in every pool initialized before it. A
discrete percpu_counter_destroy() per counter at teardown frees each
per-cpu allocation exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from
assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower
bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx()
bounds the declared lengths from above (their sum must fit the received
event), but an assoc request/response shorter than its fixed offset still
underflows here: the u8 wraps to ~250, and cfg80211_connect_result() /
cfg80211_roamed() then treat that wrapped value as the IE length and copy
that many bytes out of the small assoc_info buffer to user space via
nl80211, disclosing adjacent slab memory.
Clamp both lengths to their offsets before subtracting.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing lower bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_set_ib_path()
ucma_set_ib_path() calls ucma_event_handler() straight from the write()
path, without the handler lock that keeps ctx->file stable while a uevent
is queued. The handler re-reads ctx->file for every dereference:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION
caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's
event_list while only file A's mutex is held, racing every other user of
that list:
BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0
Read of size 8 at addr ffff888153c6a418 by task poc_corr/486
Call Trace:
__list_add_valid_or_report+0x1aa/0x1c0
ucma_event_handler+0x1be/0xc00
ucma_set_ib_path+0x45e/0x710
ucma_set_option+0x32e/0x590
ucma_write+0x1f9/0x330
Allocated by task 505:
ucma_write_cm_event+0x1a1/0x660
Freed by task 505:
kfree+0x1da/0x4c0
ucma_get_event+0x5d5/0x7e0
The freed object is a ucma_event that another thread dequeued from file B's
list under file B's mutex. File A's mut is left held on top of that,
wedging its next writer in uninterruptible sleep.
This path needs a bound and address-resolved cm_id, so it requires an RDMA
device to be present.
Take the handler lock around the call. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by sscanf(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate rl_used against rl_count in refcount block validator
ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array
with:
for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) {
rec = &rb->rf_records.rl_recs[i];
...
rl_recs[] lives in a single metadata block (4096 bytes on the common
configuration), so its real capacity is fixed by
ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the
16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly
off disk by ocfs2_validate_refcount_block() and are never checked against
that capacity, nor against each other, before any refcount/reflink/CoW
operation walks the array.
A crafted (or corrupted) refcount block with rl_used == 0xffff makes the
loop above walk far past the end of the block, dereferencing rl_recs[i]
for i up to 65534. The resulting index is then handed to the sibling
ocfs2_insert_refcount_rec(), whose insert-shift does:
if (index < le16_to_cpu(rf_list->rl_used))
memmove(&rf_list->rl_recs[index + 1],
&rf_list->rl_recs[index],
(le16_to_cpu(rf_list->rl_used) - index) *
sizeof(struct ocfs2_refcount_rec));
i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an
offset already past the block. This is reachable from an ordinary reflink
(FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent
whose cpos sorts past every real record in the leaf forces the lookup to
run off the end instead of returning early on a match. The attacker model
is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a
raw write to the block device backing an already-mounted ocfs2 filesystem.
ocfs2_validate_refcount_block() already validates the block's ECC,
signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used
against the block's actual on-disk capacity. This is the same class of
gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes
for the sibling extent-list header, which checks both the record capacity
and the "used" bound before any code walks h_list.l_recs[]:
if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) {
rc = ocfs2_error(...);
goto bail;
}
if (le16_to_cpu(eb->h_list.l_next_free_rec) >
le16_to_cpu(eb->h_list.l_count)) {
rc = ocfs2_error(...);
goto bail;
}
Add the equivalent pair of checks to ocfs2_validate_refcount_block():
reject a refcount block whose rl_count does not match the fixed per-block
capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used >
rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set,
because in that case the same union bytes hold an ocfs2_extent_list
(rf_list), not the refcount record list (rf_records) -- that layout is
already validated separately by ocfs2_validate_extent_block() when the
referenced extent block is read. This mirrors the existing
"!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this
file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or
rf_list is the live member of the union.
With this in place, a forged rl_used/rl_count is caught at block
validation time (ocfs2_error()), consistent with every other corruption
check in this function, instead of driving an out-of-bounds read in
ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove()
in ocfs2_insert_refcount_rec().
Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build:
replaying the same reflink (FICLONE) reliably hit a KASAN report in
__ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch,
and triggers no report once ocfs2_validate_refcount_block() rejects the
forged rl_used/rl_count. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd-charger: bound the EC-reported port count
cros_usbpd_charger_probe() reads two port counts from the EC and uses
one of them, num_charger_ports, as the loop bound when populating a
fixed-size array:
struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */
...
for (i = 0; i < charger->num_charger_ports; i++)
charger->ports[charger->num_registered_psy++] = port;
Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports
(from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The
only validation is a sanity check that compares the two EC-reported
values against each other:
if (num_charger_ports < num_usbpd_ports ||
num_charger_ports > num_usbpd_ports + 1)
return -EPROTO;
It never checks either count against EC_USB_PD_MAX_PORTS, the size of
the ports[] array. A malfunctioning, malicious or compromised EC that
reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for
example both 255) passes this check, and the loop then writes N pointers
into the 8-entry ports[] array embedded in the devm_kzalloc()'d
charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976
bytes): a slab out-of-bounds write.
Reject a port count larger than the ports[] array can hold. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
Currently the cros_usbpd-charger driver probe iterates based on raw
charger port count returned by the embedded controller. The only check
is against the number of USB PD ports which the embedded controller
also defines. A malicious embedded controller could return an inaccurate
port count (up to 255) resulting in an out of bounds write and
subsequent memory corruption.
Update helper functions in cros_usbpd-charger to limit port counts to
EC_USB_PD_MAX_PORTS. |
