| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a vulnerability in the BMC firmware image authentication design
at Supermicro MBD-X12DPG-OA6
. An attacker can modify the firmware to bypass BMC inspection and bypass the signature verification process |
| An unauthenticated remote attacker is able to use an existing session id of a logged in user and gain full access to the device if configuration via ethernet is enabled. |
| In GNOME Shell through 45.7, a portal helper can be launched automatically (without user confirmation) based on network responses provided by an adversary (e.g., an adversary who controls the local Wi-Fi network), and subsequently loads untrusted JavaScript code, which may lead to resource consumption or other impacts depending on the JavaScript code's behavior. |
| In the CryptX module before 0.062 for Perl, gcm_decrypt_verify() and chacha20poly1305_decrypt_verify() do not verify the tag. |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| A broken authorization vulnerability in Kiloview NDI N30 allows a remote unauthenticated attacker to deactivate user verification, giving them access to state changing actions that should only be initiated by administratorsThis issue affects
Kiloview NDI N30
and was fixed in Firmware version later than 2.02.0246 |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A Cross-Origin Resource Sharing (CORS) vulnerability exists in feast-dev/feast version 0.40.0. The CORS configuration on the agentscope server does not properly restrict access to only trusted origins, allowing any external domain to make requests to the API. This can bypass intended security controls and potentially expose sensitive information. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| cjwt is a C JSON Web Token (JWT) Implementation. Algorithm confusion occurs when a system improperly verifies the type of signature used, allowing attackers to exploit the lack of distinction between signing methods. If the system doesn't differentiate between an HMAC signed token and an RS/EC/PS signed token during verification, it becomes vulnerable to this kind of attack. For instance, an attacker could craft a token with the alg field set to "HS256" while the server expects an asymmetric algorithm like "RS256". The server might mistakenly use the wrong verification method, such as using a public key as the HMAC secret, leading to unauthorised access. For RSA, the key can be computed from a few signatures. For Elliptic Curve (EC), two potential keys can be recovered from one signature. This can be used to bypass the signature mechanism if an application relies on asymmetrically signed tokens. This issue has been addressed in version 2.3.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| stats is a macOS system monitor in for the menu bar. The Stats application is vulnerable to a local privilege escalation due to the insecure implementation of its XPC service. The application registers a Mach service under the name `eu.exelban.Stats.SMC.Helper`. The associated binary, eu.exelban.Stats.SMC.Helper, is a privileged helper tool designed to execute actions requiring elevated privileges on behalf of the client, such as setting fan modes, adjusting fan speeds, and executing the `powermetrics` command. The root cause of this vulnerability lies in the `shouldAcceptNewConnection` method, which unconditionally returns YES (or true), allowing any XPC client to connect to the service without any form of verification. As a result, unauthorized clients can establish a connection to the Mach service and invoke methods exposed by the HelperTool interface. An attacker can exploit this vulnerability to modify the hardware settings of the user’s device and execute arbitrary code with root privileges. This issue has been addressed in version 2.11.21 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. Prior to versions 4.17.0 and 5.0.0-alpha.20, there is a signature confusion attack in the HTTPRedirect binding. An attacker with any signed SAMLResponse via the HTTP-Redirect binding can cause the application to accept an unsigned message. Versions 4.17.0 and 5.0.0-alpha.20 contain a fix for the issue. |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker with a valid account to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
