Export limit exceeded: 417053 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54265 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix an uninit variable access bug in __ip6_make_skb() Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. | ||||
| CVE-2023-54266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. | ||||
| CVE-2023-54267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] | ||||
| CVE-2023-54268 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't wake up kswapd from fill_pool() syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation. | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-54270 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: usb: siano: Fix use after free bugs caused by do_submit_urb There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+ ---truncated--- | ||||
| CVE-2023-53865 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix warning when putting transaction with qgroups enabled after abort If we have a transaction abort with qgroups enabled we get a warning triggered when doing the final put on the transaction, like this: [552.6789] ------------[ cut here ]------------ [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs] [552.6817] Modules linked in: btrfs blake2b_generic xor (...) [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs] [552.6821] Code: bd a0 01 00 (...) [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286 [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000 [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010 [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20 [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70 [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028 [552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000 [552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0 [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [552.6822] Call Trace: [552.6822] <TASK> [552.6822] ? __warn+0x80/0x130 [552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6824] ? report_bug+0x1f4/0x200 [552.6824] ? handle_bug+0x42/0x70 [552.6824] ? exc_invalid_op+0x14/0x70 [552.6824] ? asm_exc_invalid_op+0x16/0x20 [552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs] [552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40 [552.6828] ? try_to_wake_up+0x94/0x5e0 [552.6828] ? __pfx_process_timeout+0x10/0x10 [552.6828] transaction_kthread+0x103/0x1d0 [btrfs] [552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs] [552.6832] kthread+0xee/0x120 [552.6832] ? __pfx_kthread+0x10/0x10 [552.6832] ret_from_fork+0x29/0x50 [552.6832] </TASK> [552.6832] ---[ end trace 0000000000000000 ]--- This corresponds to this line of code: void btrfs_put_transaction(struct btrfs_transaction *transaction) { (...) WARN_ON(!RB_EMPTY_ROOT( &transaction->delayed_refs.dirty_extent_root)); (...) } The warning happens because btrfs_qgroup_destroy_extent_records(), called in the transaction abort path, we free all entries from the rbtree "dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we don't actually empty the rbtree - it's still pointing to nodes that were freed. So set the rbtree's root node to NULL to avoid this warning (assign RB_ROOT). | ||||
| CVE-2023-53864 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable() When disabling overlay plane in mxsfb_plane_overlay_atomic_update(), overlay plane's framebuffer pointer is NULL. So, dereferencing it would cause a kernel Oops(NULL pointer dereferencing). Fix the issue by disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead. | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2023-54272 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a possible null-pointer dereference in ni_clear() In a previous commit c1006bd13146, ni->mi.mrec in ni_write_inode() could be NULL, and thus a NULL check is added for this variable. However, in the same call stack, ni->mi.mrec can be also dereferenced in ni_clear(): ntfs_evict_inode(inode) ni_write_inode(inode, ...) ni = ntfs_i(inode); is_rec_inuse(ni->mi.mrec) -> Add a NULL check by previous commit ni_clear(ntfs_i(inode)) is_rec_inuse(ni->mi.mrec) -> No check Thus, a possible null-pointer dereference may exist in ni_clear(). To fix it, a NULL check is added in this function. | ||||
| CVE-2023-53859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/idle: mark arch_cpu_idle() noinstr linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()") adds a new warning which hits on s390's arch_cpu_idle() function: RCU not on for: arch_cpu_idle+0x0/0x28 WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258 Modules linked in: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4 Hardware name: IBM 8561 T01 703 (z/VM 7.3.0) Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000 0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000 0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0 0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8 Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652 00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58 #00000000002b55bc: af000000 mc 0,0 >00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e 00000000002b55c4: 0707 bcr 0,%r7 00000000002b55c6: 0707 bcr 0,%r7 00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15) 00000000002b55ce: b90400ef lgr %r14,%r15 Call Trace: [<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258 ([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258) [<0000000000f5f0fc>] ftrace_common+0x1c/0x20 [<00000000001044f6>] arch_cpu_idle+0x6/0x28 [<0000000000f4acf6>] default_idle_call+0x76/0x128 [<00000000001cc374>] do_idle+0xf4/0x1b0 [<00000000001cc6ce>] cpu_startup_entry+0x36/0x40 [<0000000000119d00>] smp_start_secondary+0x140/0x150 [<0000000000f5d2ae>] restart_int_handler+0x6e/0x90 Mark arch_cpu_idle() noinstr like all other architectures with CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this. | ||||
| CVE-2023-53858 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error If clk_get_rate() fails, the clk that has just been allocated needs to be freed. | ||||
| CVE-2023-53856 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: Call of_changeset_init() early When of_overlay_fdt_apply() fails, the changeset may be partially applied, and the caller is still expected to call of_overlay_remove() to clean up this partial state. However, of_overlay_apply() calls of_resolve_phandles() before init_overlay_changeset(). Hence if the overlay fails to apply due to an unresolved symbol, the overlay_changeset.cset.entries list is still uninitialized, and cleanup will crash with a NULL-pointer dereference in overlay_removal_is_ok(). Fix this by moving the call to of_changeset_init() from init_overlay_changeset() to of_overlay_fdt_apply(), where all other early initialization is done. | ||||
| CVE-2023-53855 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on driver remove When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. | ||||
| CVE-2023-53854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8186: Fix use-after-free in driver remove path When devm runs function in the "remove" path for a device it runs them in the reverse order. That means that if you have parts of your driver that aren't using devm or are using "roll your own" devm w/ devm_add_action_or_reset() you need to keep that in mind. The mt8186 audio driver didn't quite get this right. Specifically, in mt8186_init_clock() it called mt8186_audsys_clk_register() and then went on to call a bunch of other devm function. The caller of mt8186_init_clock() used devm_add_action_or_reset() to call mt8186_deinit_clock() but, because of the intervening devm functions, the order was wrong. Specifically at probe time, the order was: 1. mt8186_audsys_clk_register() 2. afe_priv->clk = devm_kcalloc(...) 3. afe_priv->clk[i] = devm_clk_get(...) At remove time, the order (which should have been 3, 2, 1) was: 1. mt8186_audsys_clk_unregister() 3. Free all of afe_priv->clk[i] 2. Free afe_priv->clk The above seemed to be causing a use-after-free. Luckily, it's easy to fix this by simply using devm more correctly. Let's move the devm_add_action_or_reset() to the right place. In addition to fixing the use-after-free, code inspection shows that this fixes a leak (missing call to mt8186_audsys_clk_unregister()) that would have happened if any of the syscon_regmap_lookup_by_phandle() calls in mt8186_init_clock() had failed. | ||||
| CVE-2023-53853 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netlink: annotate accesses to nlk->cb_running Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01 | ||||
| CVE-2023-53852 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-core: fix memory leak in dhchap_secret_store Free dhchap_secret in nvme_ctrl_dhchap_secret_store() before we return fix following kmemleack:- unreferenced object 0xffff8886376ea800 (size 64): comm "check", pid 22048, jiffies 4344316705 (age 92.199s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg 75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL backtrace: [<0000000030ce5d4b>] __kmalloc+0x4b/0x130 [<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core] [<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0 [<00000000437e7ced>] vfs_write+0x2ba/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff8886376eaf00 (size 64): comm "check", pid 22048, jiffies 4344316736 (age 92.168s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg 75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL backtrace: [<0000000030ce5d4b>] __kmalloc+0x4b/0x130 [<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core] [<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0 [<00000000437e7ced>] vfs_write+0x2ba/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-54179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Array index may go out of bound Klocwork reports array 'vha->host_str' of size 16 may use index value(s) 16..19. Use snprintf() instead of sprintf(). | ||||
| CVE-2023-53850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: use internal state to free traffic IRQs If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. | ||||
| CVE-2023-53849 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix workqueue leak on bind errors Make sure to destroy the workqueue also in case of early errors during bind (e.g. a subcomponent failing to bind). Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with drmm_") the mode config will be freed when the drm device is released also when using the legacy interface, but add an explicit cleanup for consistency and to facilitate backporting. Patchwork: https://patchwork.freedesktop.org/patch/525093/ | ||||