| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| A flaw was found in osbuild-composer. A condition can be triggered that disables GPG verification for package repositories, which can expose the build phase to a Man-in-the-Middle attack, allowing untrusted code to be installed into an image being built. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| aiosmptd is a reimplementation of the Python stdlib smtpd.py based on asyncio. Prior to version 1.4.6, servers based on aiosmtpd accept extra unencrypted commands after STARTTLS, treating them as if they came from inside the encrypted connection. This could be exploited by a man-in-the-middle attack. Version 1.4.6 contains a patch for the issue. |
| sshpiper is a reverse proxy for sshd. Starting in version 1.0.50 and prior to version 1.3.0, the way the proxy protocol listener is implemented in sshpiper can allow an attacker to forge their connecting address. Commit 2ddd69876a1e1119059debc59fe869cb4e754430 added the proxy protocol listener as the only listener in sshpiper, with no option to toggle this functionality off. This means that any connection that sshpiper is directly (or in some cases indirectly) exposed to can use proxy protocol to forge its source address. Any users of sshpiper who need logs from it for whitelisting/rate limiting/security investigations could have them become much less useful if an attacker is sending a spoofed source address. Version 1.3.0 contains a patch for the issue. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| RICOH Streamline NX versions 3.5.1 to 24R3 are vulnerable to tampering with operation history. If an attacker can perform a man-in-the-middle attack, they may alter the values of HTTP requests, which could result in tampering with the operation history of the product’s management tool. |
| An improper verification of cryptographic signature in Zscaler's SAML authentication mechanism on the server-side allowed an authentication abuse. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| NLnet Labs Unbound up to and including version 1.24.1 is vulnerable to possible domain hijack attacks. Promiscuous NS RRSets that complement positive DNS replies in the authority section can be used to trick resolvers to update their delegation information for the zone. Usually these RRSets are used to update the resolver's knowledge of the zone's name servers. A malicious actor can exploit the possible poisonous effect by injecting NS RRSets (and possibly their respective address records) in a reply. This could be done for example by trying to spoof a packet or fragmentation attacks. Unbound would then proceed to update the NS RRSet data it already has since the new data has enough trust for it, i.e., in-zone data for the delegation point. Unbound 1.24.1 includes a fix that scrubs unsolicited NS RRSets (and their respective address records) from replies mitigating the possible poison effect. Unbound 1.24.2 includes an additional fix that scrubs unsolicited NS RRSets (and their respective address records) from YXDOMAIN and non-referral nodata replies, further mitigating the possible poison effect. |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to version 1.0.3, there is a flaw in the timestamp response signature verification logic. In particular, chain verification is performed against the TSR's embedded certificates up to the trusted root(s), but fails to verify the TSR's own signature against the timestamping leaf certificates. Consequently, vulnerable versions perform insufficient signature validation to properly consider a TSR verified, as the attacker can introduce any TSR signature so long as the embedded leaf chains up to some root TSA. This issue has been patched in version 1.0.3. There is no workaround for this issue. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Hosts listed in TrustedOrigins implicitly allow requests from the corresponding HTTP origins, allowing network MitMs to perform CSRF attacks. After the CVE-2025-24358 fix, a network attacker that places a form at http://example.com can't get it to submit to https://example.com because the Origin header is checked with sameOrigin against a synthetic URL. However, if a host is added to TrustedOrigins, both its HTTP and HTTPS origins will be allowed, because the schema of the synthetic URL is ignored and only the host is checked. For example, if an application is hosted on https://example.com and adds example.net to TrustedOrigins, a network attacker can serve a form at http://example.net to perform the attack. Applications should migrate to net/http.CrossOriginProtection, introduced in Go 1.25. If that is not an option, a backport is available as a module at filippo.io/csrf, and a drop-in replacement for the github.com/gorilla/csrf API is available at filippo.io/csrf/gorilla. |
