| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In multiple functions of bluetooth_cco.cc, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In trusty_dputc of generic-arm64-smcall.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible time-of-check to time-of-use due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
New sk should not be added to parent socket accept queue after last
l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and
state set to BT_CLOSED, as that can result to UAF on dereferencing the
dangling parent reference.
l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown,
due to chan->state accessed without consistent locking:
[Task 1] [Task 2]
l2cap_sock_release(parent) l2cap_connect
l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm
l2cap_chan_lock(pchan)
l2cap_chan_close
l2cap_sock_teardown_cb
pchan->state = BT_CLOSED
l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan)
l2cap_new_connection
l2cap_sock_new_connection_cb
l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan)
l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */
Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in
l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes
where missing, to avoid data races.
Although the data races on pchan->state should be fixed too, this
defensive sk_state check probably makes sense in any case. |
| Race condition in WebAppInstalls in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in rds_cong_map_updated()
rds_cong_map_updated() runs after a peer's congestion map has been
rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the
clear-all in the loopback and IB send-completion paths). It bumps
rds_cong_generation and then checks waitqueue_active() on
map->m_waitq and on rds_poll_waitq to decide whether anyone needs
waking. atomic_inc() carries no ordering and waitqueue_active() is a
plain load, so nothing orders the map and generation stores before
the wait queue reads. The waiters do the mirror image: rds_cong_wait()
adds itself to m_waitq and then tests the port bit, and rds_poll()
registers on rds_poll_waitq and then reads the generation. That is
the store-buffering pattern described above waitqueue_active() in
include/linux/wait.h - the updater can observe an empty wait queue
while the waiter still observes the port as congested, and no wake-up
is issued.
rds_cong_wait() is an interruptible sleep with no timeout, so a
sender blocked on a congested port stays blocked until the next
congestion update from that peer arrives or a signal is delivered.
A poll() waiter misses the map-updated notification the same way.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier, as rds_tcp_state_change() already does for
the same pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Do not skip lock checks for single-byte ranges
check_lock_range() uses inclusive ranges. Its callers pass the end
offset as start + length - 1, so start == end represents a valid
single-byte range rather than an empty range.
The start == end shortcut therefore skips mandatory byte-range lock
checks for one-byte reads, writes, copychunk operations and one-byte
truncate ranges. A conflicting lock covering that byte is not checked
and the operation is allowed to proceed.
Remove the shortcut. The truncate size == inode->i_size case is already
handled by only calling check_lock_range() when the new size differs
from the current file size. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: kcm: Hold RCU read lock while running BPF parser
kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which
prevents CPU migration, but does not establish an RCU read-side
critical section. Consequently, BPF map operations can trigger
WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser
program.
Hold the RCU read lock while running the program. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, which is later caught by the WARN_ON_ONCE() in
null_map_queues().
For !apply_fn attributes, power_store()'s null_add_dev() validates and
builds the device under "lock" but only sets CONFIGURED afterwards. A store
slipping in during this window can change a field mid-setup -- for example,
zone_nr_conv can be pushed above nr_zones after it has already been
clamped, leading to an out-of-bounds dev->zones[] access.
Take "lock" in the macro around the apply_fn call, the CONFIGURED test and
the field write, and move it out of nullb_apply_submit_queues()/
nullb_apply_poll_queues() so both paths are covered once. This serializes
stores with power_store's setup and with each other. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks
_bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for
full sockets, so these helpers expect the socket lock to be held.
BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF
programs without acquiring the socket lock. A program attached to
either hook can therefore trigger the sock_owned_by_me() warning by
calling bpf_setsockopt() or bpf_getsockopt().
Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME
and CGROUP_UNIX_GETSOCKNAME. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute updates with device setup
The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to
change the configuration of a live device by testing
NULLB_DEV_FL_CONFIGURED, but that flag is only set by
nullb_device_power_store() after null_add_dev() has returned, and the
store methods take no lock at all. configfs only serializes writes to
the same open file (buffer->mutex), so a write to any attribute can run
concurrently with null_add_dev() and change the device configuration
while it is being used.
null_add_dev() reads the configuration several times, e.g. dev->zoned is
read once to set up the queue limits and once to initialize the zone
resources:
CPU0: echo 1 > nullb0/power CPU1: echo 1 > nullb0/zoned
nullb_device_power_store()
mutex_lock(&lock)
null_add_dev()
if (dev->zoned) -> false
/* no BLK_FEAT_ZONED */ nullb_device_zoned_store()
test_bit(FL_CONFIGURED) -> 0
dev->zoned = true
blk_mq_alloc_disk()
/* queue is not zoned */
if (nullb->dev->zoned) -> true
null_register_zoned_dev()
blk_revalidate_disk_zones()
blk_revalidate_disk_zones() is then called for a queue that does not
have BLK_FEAT_ZONED set, which triggers its WARN_ON_ONCE() and fails the
device setup with -EIO:
WARNING: CPU: 2 PID: 322 at block/blk-zoned.c:2357 blk_revalidate_disk_zones+0x4c/0x560
Clearing dev->zoned in the same window is worse: the queue is created
with BLK_FEAT_ZONED but the zone resources are never initialized, so
add_disk() succeeds for a zoned disk that has no zones. And a store that
lands after the last dev->zoned test leaves dev->zoned set while
dev->zones is still NULL, which null_process_zoned_cmd() dereferences on
the first write.
Fix this by taking the global lock, which nullb_device_power_store()
already holds across null_add_dev() and null_del_dev(), around both the
NULLB_DEV_FL_CONFIGURED test and the update of the device configuration.
The submit_queues and poll_queues apply callbacks are now called with
that lock held, so remove the locking they did themselves.
Since the store methods can run as soon as configfs_register_subsystem()
returns, that is, before null_init() gets to mutex_init(&lock), also
initialize the lock statically with DEFINE_MUTEX(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize input teardown with event_input
snd_midi_input_event() must not be running while a rawmidi substream is
closing, since this can lead to the trigger state becoming out-of-step
through this sequence in snd_rawmidi_input_trigger():
snd_rawmidi_input_trigger(up=0)
snd_midi_input_event()
-> snd_rawmidi_kernel_read()
-> snd_rawmidi_input_trigger(up=1)
-> cancel_work_sync()
which ends with the underlying device being active unexpectedly.
When this is called from close_substream(), further input can re-trigger
the input event leaving it running after rawmidi_release_priv() has set
rfile->rmidi to NULL which leads to:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0
Call trace:
snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P)
snd_rawmidi_input_event_work+0x1c/0x2c
process_one_work+0x150/0x3a4
worker_thread+0x190/0x318
Apply a similar approach to commit ef7607ab1c8ad ("ALSA: seq: midi:
Serialize output teardown with event_input") which fixed the same issue
in the output direction, but updated to use RCU following Takashi Iwai's
proposed follow-on patch [1].
With this change in place, midisynth_unsubscribe() clears the input file
so snd_midi_input_event() will not re-trigger the stream and will be
quiesced by the cancel_work_sync() in snd_rawmidi_input_trigger().
[1] https://lore.kernel.org/linux-sound/20260813144224.753399-1-tiwai@suse.de/ |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE
xprtsock replaces and restores sk->sk_data_ready and
sk->sk_write_space on live sockets with plain stores, and
xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain
load. These callback pointers are shared with generic socket and
protocol paths that may read or invoke them concurrently, so xprtsock
needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract
that the validated 4022 family applied elsewhere.
When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later
restores the lower-socket callbacks during teardown, another CPU may
still hold an earlier callback snapshot. The plain replace/restore
pattern leaves the same visibility hole as the validated 4022 family,
so a stale snapshot can still invoke xs_data_ready() or
xs_udp_write_space() after the live callback fields have already been
restored to the lower-socket handlers.
Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space
stores in xs_local_finish_connecting(), xs_udp_finish_connecting(),
xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use
READ_ONCE() for the direct sk_write_space invocation in
xs_udp_do_set_buffer_size(). This matches the required callback
visibility contract while leaving adjacent sk_state_change and
sk_error_report handling unchanged. |
