| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE),
i.e. 256 bytes, for the layoutupdate4 body written by the layout driver.
The flexfiles record can exceed that.
ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4,
an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server
whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of
those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4
and the bool add a further 144, so the body passes 256 bytes before the
netaddr4 is encoded at all. encode_layoutstats() additionally writes
the deviceid4 and the layoutupdate4 lou_type word, neither of which the
macro accounts for.
The filehandle and the address are both chosen by the server, through
LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the
end of the send buffer. xdr_reserve_space() returns NULL once that
happens, and the two ff_layout_encode_io_latency() calls run with
dss_info->mirror->lock held, so a NULL return there leaves the lock
permanently held.
Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the
reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: kcm: Hold RCU read lock while running BPF parser
kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which
prevents CPU migration, but does not establish an RCU read-side
critical section. Consequently, BPF map operations can trigger
WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser
program.
Hold the RCU read lock while running the program. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing
In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond
to a logical cpu recognized by the kernel, resulting in the cpu variable
initialization to an error value.
Currently, the get_logical_index() return value is not checked for failure,
which might result in out-of-bounds memory corruption while trying to
index a per_cpu variable array.
Add a check to evaluate get_logical_index() return value. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash
When an AER error occurs and the bus is hung, the register reads return
0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in
an invalid memory access when accessing q->desc[] or q->entry[].
Unable to handle kernel paging request at virtual address
ffffffc01099eac0
pc : mt76_dma_add_buf+0x124/0x188 [mt76]
lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76]
sp : ffffffc016d9bbf0
x29: ffffffc016d9bc10 x28: 0000000000000000
x27: 0000000000000000 x26: ffffffb7855e50b8
x25: ffffffb80d04f000 x24: 0000000000000000
x23: 0000000000000ec0 x22: ffffffb796803648
x21: ffffffb796801f80 x20: ffffffb7968035f8
x19: 0000000000000ec0 x18: 0000000000000000
x17: 000000004ec00000 x16: 000000000ec00000
x15: ffffffc01099eac0 x14: 000000004ec00000
x13: 00000000ffc5a000 x12: ffffffc016d9bc32
x11: 00000000ffffffff x10: 0000000000000002
x9 : 0000000000000000 x8 : 000000000000b4ac
x7 : 0000000000000a20 x6 : ffffffb6c1806400
x5 : 0000000000000000 x4 : ffffffb80d04f000
x3 : 0000000000000000 x2 : 0000000000000001
x1 : 000000000ec04000 x0 : ffffffb7968035f8
Call trace:
mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)]
mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)]
mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)]
mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)]
mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)]
process_one_work+0x188/0x514
worker_thread+0x12c/0x300
kthread+0x140/0x1fc
ret_from_fork+0x10/0x30
Fix the invalid memory access by validating the DMA index read from the
hardware before it is used as a queue index. An out-of-range value, such
as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can
no longer corrupt q->head or q->tail. In addition, check the bus_hung flag
in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU
messages while the bus is hung, and install no-op bus operations when an
unrecoverable AER error is detected, preventing further invalid hardware
accesses.
Due to hardware limitations - such as the lack of a connected hardware
reset pin or the absence of host re-probe functionality - affected Wi-Fi
devices may not fully recover to a normal operational state after
certain errors, even with AER enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range. |
| The Ultimate Member WordPress plugin before 2.13.1 does not escape a value derived from user supplied profile names before outputting it in the page title, and decodes HTML entities in it after its own sanitisation has already run, allowing unauthenticated attackers who register an account to store JavaScript that will execute when any visitor, including an administrator, views their profile. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound SNL TLV parsing to the skb and add length checks
nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length
pair derived from skb->len, without bounding reads to the actual skb
data. Three problems followed:
- For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed.
- The per-TLV header (type, length) was read without checking that two
bytes remained.
- A declared TLV length could run past the end of the buffer, and an
SDREQ with length == 0 made "service_name_len = length - 1" underflow
(size_t), driving an out-of-bounds read in the following strncmp() /
nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3]
without a length check.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Walk the TLV list by pointer, bounded by skb_tail_pointer() over the
linear skb data, and validate each TLV declared length before use. Add
explicit length checks for SDREQ (>= 1) and SDRES (exactly 2).
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 1.4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on instances where combine_loaded_css has been enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject unprivileged writes to reserved $LX* xattrs
Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names
from userspace unless the caller has CAP_SYS_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib()
ntfs_ir_to_ib copies all entries from index_root into a freshly allocated
index_block_size-byte buffer without verifying that the entries fit in the
available space. The entries in index_root may be larger than the usable
entry space in the index block.
This can cause OOB writes past the end of the allocation.
The validator ntfs_index_root_inconsistent() checks that entries are
self-consistent within the IR value, but never cross-checks them against
index_block_size. There is no bounds check in ntfs_ir_to_ib() before the
memcpy.
Fixing this at the sink in ntfs_ir_to_ib() since
ntfs_index_root_inconsistent() validates the logical consistency of
index_root as a structure and a root with large entries is a structurally
valid root. The bug is a size conflict of ntfs_ir_to_ib().
Also, the validator is called once per inode load in
ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a
reparent, a check there adds no overhead to the common path.
Moreover, even a future call path that bypasses the validator would still
be protected.
With NULL as first parameter of ntfs_error(), the volume error flag is
never set by this call, so the device name will be absent from the error
message. In any case, that the caller, ntfs_ir_reparent(), prints an error
message that includes the device name on NULL returns.
I think this is the best solution available without adding
'struct super_block *sb' as a parameter to ntfs_ir_to_ib().
This heap out-of-bounds write is triggered by a crafted filesystem image,
which is not in the kernel threat model, anyway, fixing memory errors would
be nice to keep things secure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| The UsersWP WordPress plugin before 1.5.10 does not verify that a social login provider has confirmed ownership of an email address before using it to resolve an existing account, allowing unauthenticated attackers to log in as any user, including administrators, whose email address they can assert through a provider account of their own. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
The SBI return value controls how many bytes are copied from shared
memory into the RPMI notification buffer. It is not validated against
the negotiated shared-memory size before that copy. The event walker
also uses a reversed loop condition and can inspect a short event record.
Validate the complete notification length before copying it, iterate only
while a full event header remains, and stop when a declared event payload
extends beyond the copied notification data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: destroy QP before mem pools on accept failure
On the rdma_accept_failed error path of
smbdirect_accept_connect_request(), the receive io posted just above is
owned by the QP (recv_io is set to NULL after a successful post). The
error path fell through to smbdirect_connection_destroy_mem_pools()
before smbdirect_connection_destroy_qp(), so the mem pools and the
recv_io slab cache were destroyed while that recv_io was still
outstanding on the QP.
The drain in smbdirect_connection_destroy_qp() (ib_drain_qp()) is what
runs the recv completion that returns the recv_io to the free list, so
destroying the pools first leaves the object outstanding at
kmem_cache_destroy() time ("Slab cache still has objects") and later
frees it into an already-destroyed mempool (mempool_free_bulk
NULL-pointer dereference).
Give rdma_accept_failed its own teardown that drains the QP first, then
destroys the mem pools, and returns. The remaining labels
(post_recv_io_failed onward) run before the recv_io was ever posted, so
they keep the mem-pools-then-qp order.
The outstanding recv_io at kmem_cache_destroy() time:
[ 3487.344647] =============================================================================
[ 3487.349942] BUG smbdirect_recv_io_cache_ffff88811ba99000 (Not tainted): Objects remaining on __kmem_cache_shutdown()
[ 3487.356078] -----------------------------------------------------------------------------
[ 3487.356078]
[ 3487.356738] Object 0xffff8881511c3440 @offset=13376
[ 3487.358464] Allocated in mempool_alloc_noprof+0x18c/0x290 age=1194 cpu=6 pid=22254
[ 3487.361197] mempool_alloc_noprof+0x18c/0x290
[ 3487.361542] smbdirect_connection_create_mem_pools+0x405/0x780
[ 3487.361972] smbdirect_accept_connect_request+0x5a8/0x1b80
[ 3487.362359] smbdirect_listen_rdma_event_handler+0x1579/0x1b90
[ 3487.362779] cma_cm_event_handler+0x9c/0x230
[ 3487.363096] cma_ib_req_handler+0x2682/0x45d0
[ 3487.363414] cm_process_work+0x56/0x3d0
[ 3487.363676] cm_work_handler+0x8a0e/0xd000
[ 3487.367496] process_scheduled_works+0xa07/0x13a0
[ 3487.367859] worker_thread+0x7c9/0xc80
[ 3487.368148] kthread+0x341/0x430
[ 3487.368407] ret_from_fork+0x3a8/0x7a0
[ 3487.368704] ret_from_fork_asm+0x1a/0x30
[ 3487.370307] Slab 0xffffea0005447000 objects=19 used=1 fp=0xffff8881511c0040 flags=0x100000000000240(workingset|head|node=0|zone=2)
[ 3487.372840] ------------[ cut here ]------------
[ 3487.373195] WARNING: mm/slub.c:1244 at __slab_err+0x1a/0x30, CPU#6: kworker/6:84/22254
[ 3487.373759] Modules linked in:
[ 3487.373993] CPU: 6 UID: 0 PID: 22254 Comm: kworker/6:84 Tainted: G B 7.1.0-next-20260623+ #88 PREEMPT(lazy)
[ 3487.374778] Tainted: [B]=BAD_PAGE
[ 3487.377830] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3487.378515] Workqueue: ib_cm cm_work_handler
[ 3487.378820] RIP: 0010:__slab_err+0x1a/0x30
[ 3487.379129] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 e8 36 00 00 00 bf 05 00 00 00 be 01 00 00 00 e8 f7 75 45 00 90 <0f> 0b 90 c3 cc cc cc cc cc 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
[ 3487.383255] RSP: 0018:ffff888220fc7050 EFLAGS: 00010093
[ 3487.383643] RAX: ffffffff8168e60a RBX: ffff88810955e640 RCX: ffff88821c381d80
[ 3487.384158] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff870fa080
[ 3487.384662] RBP: ffff888220fc7068 R08: ffffffff870fa087 R09: 1ffffffff0e1f410
[ 3487.385192] R10: dffffc0000000000 R11: fffffbfff0e1f411 R12: ffffea0005447210
[ 3487.385674] R13: ffffea0005447000 R14: ffff888220fc7068 R15: ffff88812a8ab300
[ 3487.388932] FS: 0000000000000000(0000) GS:ffff888427e76000(0000) knlGS:0000000000000000
[ 3487.389529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3487.389934] CR2: 00007ffcf2d84fd8 CR3: 0000000111d64006 CR4: 0000000000f72ef0
[ 3487.390440] PKRU: 55555554
[ 3487.390641] Call Trace:
[ 3487.390826] <TASK>
[ 3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
