Export limit exceeded: 415500 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31744 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix NULL pointer dereference when perf domain ID is not found dev_energymodel_nl_get_perf_domains_doit() calls em_perf_domain_get_by_id() but does not check the return value before passing it to __em_nl_get_pd_size(). When a caller supplies a non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL, and __em_nl_get_pd_size() immediately dereferences pd->cpus (struct offset 0x30), causing a NULL pointer dereference. The sister handler dev_energymodel_nl_get_perf_table_doit() already handles this correctly via __em_nl_get_pd_table_id(), which returns NULL and causes the caller to return -EINVAL. Add the same NULL check in the get-perf-domains do handler. [ rjw: Subject and changelog edits ] | ||||
| CVE-2026-31745 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: reset: gpio: fix double free in reset_add_gpio_aux_device() error path When __auxiliary_device_add() fails, reset_add_gpio_aux_device() calls auxiliary_device_uninit(adev). The device release callback reset_gpio_aux_device_release() frees adev, but the current error path then calls kfree(adev) again, causing a double free. Keep kfree(adev) for the auxiliary_device_init() failure path, but avoid freeing adev after auxiliary_device_uninit(). | ||||
| CVE-2026-31443 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated. | ||||
| CVE-2026-31747 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix. | ||||
| CVE-2026-31444 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free and NULL deref in smb_grant_oplock() smb_grant_oplock() has two issues in the oplock publication sequence: 1) opinfo is linked into ci->m_op_list (via opinfo_add) before add_lease_global_list() is called. If add_lease_global_list() fails (kmalloc returns NULL), the error path frees the opinfo via __free_opinfo() while it is still linked in ci->m_op_list. Concurrent m_op_list readers (opinfo_get_list, or direct iteration in smb_break_all_levII_oplock) dereference the freed node. 2) opinfo->o_fp is assigned after add_lease_global_list() publishes the opinfo on the global lease list. A concurrent find_same_lease_key() can walk the lease list and dereference opinfo->o_fp->f_ci while o_fp is still NULL. Fix by restructuring the publication sequence to eliminate post-publish failure: - Set opinfo->o_fp before any list publication (fixes NULL deref). - Preallocate lease_table via alloc_lease_table() before opinfo_add() so add_lease_global_list() becomes infallible after publication. - Keep the original m_op_list publication order (opinfo_add before lease list) so concurrent opens via same_client_has_lease() and opinfo_get_list() still see the in-flight grant. - Use opinfo_put() instead of __free_opinfo() on err_out so that the RCU-deferred free path is used. This also requires splitting add_lease_global_list() to take a preallocated lease_table and changing its return type from int to void, since it can no longer fail. | ||||
| CVE-2026-31748 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. | ||||
| CVE-2026-31445 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted] | ||||
| CVE-2026-31749 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. | ||||
| CVE-2026-31750 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] | ||||
| CVE-2026-31751 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware. | ||||
| CVE-2026-31738 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | ||||
| CVE-2026-31460 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if ext_caps is valid in BL setup LVDS connectors don't have extended backlight caps so check if the pointer is valid before accessing it. (cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) | ||||
| CVE-2026-31461 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix drm_edid leak in amdgpu_dm [WHAT] When a sink is connected, aconnector->drm_edid was overwritten without freeing the previous allocation, causing a memory leak on resume. [HOW] Free the previous drm_edid before updating it. (cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) | ||||
| CVE-2026-43054 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Drain commands in target_reset handler tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS without draining any in-flight commands. The SCSI EH documentation (scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver has made lower layers "forget about timed out scmds" and is ready for new commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug, mpi3mr) enforces this by draining or completing outstanding commands before returning SUCCESS. Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight scsi_cmnd structures for recovery commands (e.g. TUR) while the target core still has async completion work queued for the old se_cmd. The memset in queuecommand zeroes se_lun and lun_ref_active, causing transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN reference prevents transport_clear_lun_ref() from completing, hanging configfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0 Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd — this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset. | ||||
| CVE-2026-31465 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: writeback: don't block sync for filesystems with no data integrity guarantees Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot guarantee data persistence on sync (eg fuse). For superblocks with this flag set, sync kicks off writeback of dirty inodes but does not wait for the flusher threads to complete the writeback. This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes()"). The flag belongs at the superblock level because data integrity is a filesystem-wide property, not a per-inode one. Having this flag at the superblock level also allows us to skip having to iterate every dirty inode in wait_sb_inodes() only to skip each inode individually. Prior to this commit, mappings with no data integrity guarantees skipped waiting on writeback completion but still waited on the flusher threads to finish initiating the writeback. Waiting on the flusher threads is unnecessary. This commit kicks off writeback but does not wait on the flusher threads. This change properly addresses a recent report [1] for a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting on the flusher threads to finish: Workqueue: pm_fs_sync pm_fs_sync_work_fn Call Trace: <TASK> __schedule+0x457/0x1720 schedule+0x27/0xd0 wb_wait_for_completion+0x97/0xe0 sync_inodes_sb+0xf8/0x2e0 __iterate_supers+0xdc/0x160 ksys_sync+0x43/0xb0 pm_fs_sync_work_fn+0x17/0xa0 process_one_work+0x193/0x350 worker_thread+0x1a1/0x310 kthread+0xfc/0x240 ret_from_fork+0x243/0x280 ret_from_fork_asm+0x1a/0x30 </TASK> On fuse this is problematic because there are paths that may cause the flusher thread to block (eg if systemd freezes the user session cgroups first, which freezes the fuse daemon, before invoking the kernel suspend. The kernel suspend triggers ->write_node() which on fuse issues a synchronous setattr request, which cannot be processed since the daemon is frozen. Or if the daemon is buggy and cannot properly complete writeback, initiating writeback on a dirty folio already under writeback leads to writeback_get_folio() -> folio_prepare_writeback() -> unconditional wait on writeback to finish, which will cause a hang). This commit restores fuse to its prior behavior before tmp folios were removed, where sync was essentially a no-op. [1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1 | ||||
| CVE-2026-43050 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly. | ||||
| CVE-2026-8022 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 3.1 Low |
| Inappropriate implementation in MHTML in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who convinced a user to engage in specific UI gestures to leak cross-origin data via a crafted MHTML page. (Chromium security severity: Low) | ||||
| CVE-2026-31736 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_ppe: avoid NULL deref when gmac0 is disabled If the gmac0 is disabled, the precheck for a valid ingress device will cause a NULL pointer deref and crash the system. This happens because eth->netdev[0] will be NULL but the code will directly try to access netdev_ops. Instead of just checking for the first net_device, it must be checked if any of the mtk_eth net_devices is matching the netdev_ops of the ingress device. | ||||
| CVE-2026-31735 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommupt: Fix short gather if the unmap goes into a large mapping unmap has the odd behavior that it can unmap more than requested if the ending point lands within the middle of a large or contiguous IOPTE. In this case the gather should flush everything unmapped which can be larger than what was requested to be unmapped. The gather was only flushing the range requested to be unmapped, not extending to the extra range, resulting in a short invalidation if the caller hits this special condition. This was found by the new invalidation/gather test I am adding in preparation for ARMv8. Claude deduced the root cause. As far as I remember nothing relies on unmapping a large entry, so this is likely not a triggerable bug. | ||||
| CVE-2026-31734 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable() only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate(). Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled, so migration_disabled == 1 always means the task is truly migration-disabled regardless of whether it is the current task. The old unconditional p == current check was a false negative in this case, potentially allowing a migration-disabled task to be dispatched to a remote CPU and triggering scx_error in task_can_run_on_remote_rq(). Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is enabled, where the ambiguity with the BPF prolog still exists. | ||||