Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417557 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97929 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() processes the interrupt URB data without checking urb->actual_length. A short transfer from a malfunctioning device would cause the handler to process uninitialized heap data from the kmalloc-allocated in04_buf, which is then copied to the mmap-accessible ctl_snapshot[] array. Fix by using kzalloc() for in04_buf to zero-initialize the buffer, and adding an actual_length check to skip processing on short transfers while still resubmitting the URB. | ||||
| CVE-2026-97928 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97600 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: cc2520: fix FIFOP work use-after-free The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal, cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ remains active until after ->remove() returns and can queue the work again after that flush, allowing it to run after the private data is released. Disable the work with disable_work_sync() instead of flushing it, so the handler can no longer queue it once removal begins. Destroy the buffer mutex last, since the worker and the stop callback invoked through ieee802154_unregister_hw() both take it. Found by an in-house static analysis tool. | ||||
| CVE-2026-97538 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses response headers and payload fields without first checking that they are present in the received report. A short report can therefore make the driver consume uninitialized bytes from the HID transport buffer and expose them as sensor values through sysfs. Validate the response header and the fields used by each response type before parsing them. | ||||
| CVE-2026-97528 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there. | ||||
| CVE-2026-97527 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free. | ||||
| CVE-2026-97515 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state. | ||||
| CVE-2026-97513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Release m2m_ctx after Instance Removed from List Possible use after free if IRQ thread manages to obtain spinlock between m2m_ctx release and wave5_release function removing stream instance from list of active instances. The IRQ thread looks for the m2m_ctx which is freed so null pointer dereference occurs. | ||||
| CVE-2026-97503 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/proc: Size interrupt directory names for 10-digit interrupt numbers /proc/irq/<n>/ directory names are built in `char name[10]` buffers with `sprintf(name, "%u", irq)`. Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and current sparse-IRQ configurations allow interrupt numbers in that range. Size the temporary name buffer for the current decimal form and switch to bounded formatting when creating or removing the proc entry. | ||||
| CVE-2026-97492 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed In case reconfiguration of NAN fails, we call ieee80211_handle_reconfig_failure, that marks all interfaces as not in the driver. Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces is called to destroy all the interfaces. If we have any other interface but the NAN one, for example a BSS station, then when its state (links, stations) will be removed, we won't tell the driver about this, because we will think that the interfaces are not in the driver, and then drivers might remain with dangling pointers to objects like stations and links (at least for iwlwifi this is the case). ieee80211_handle_reconfig_failure is meant to be called after we cleaned up the state in the driver, there is no reason to call it for NAN reconfiguration failure. Fix the code to just warn in such a case, as we do in other error paths in reconfig where it is too complicated to rewind. | ||||
| CVE-2026-97432 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix P2P-Device binding handling Our binding handling for P2P-Device can run into the following scenario, as observed by our testing: - a station interface is connected on some channel - the P2P-Device does a remain-on-channel (ROC) on that channel - the ROC ends, and the P2P-Device is removed from the binding, but the phy_ctxt pointer is left around as a PHY cache so we don't need to recalibrate to the channel again and again in case it's not shared - a binding update by the station interface, even a removal, will re-add the P2P-Device to the binding - the P2P-Device is removed, which removes the PHY context, but it's still in the binding so the firmware crashes Since the P2P device is removed from the binding and only re- added by unrelated code, but we want to keep the phy_ctxt around as a cache for future ROC usage, fix it by adding a boolean that indicates whether or not the P2P-Device should be added to the binding, and handle that in the binding iterator. That way, the station interface cannot re-add the P2P-Device to the binding when that isn't active. | ||||
| CVE-2026-97428 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: harden FRU PIA parsing with bounded helpers Replace the open-coded TLV walk with fru_pia_advance() and fru_pia_copy_field() helpers that bound every read by the actual EEPROM data length, preventing out-of-bounds reads on truncated or malformed FRU data. | ||||
| CVE-2026-97424 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but released in gfx_v9_0_hw_fini(), so the put site has to query amdgpu_irq_enabled() because the get is skipped on SR-IOV VF. ras_late_init / ras_fini have no suspend counterpart, so move the put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a matching ras_suspend callback that is invoked from amdgpu_ras_suspend() before disable_all_features(). The get and put now sit in the same place and check the same condition (not VF, funcs registered), no refcount querying needed. An active flag gates ras_fini so the suspend-then-unload-without-resume path falls into amdgpu_ras_block_late_fini_default() instead of double-releasing what ras_suspend already cleaned up. Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0 manages cp_ecc_error_irq locally and is unaffected; no other GFX generation has this IRQ. | ||||
| CVE-2026-97412 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: quiesce DMA before freeing resources pdsc_teardown() frees DMA buffers but does not disable bus mastering, leaving the device able to perform DMA after the buffers are freed. This can lead to use-after-free if the device writes to freed memory. Add pci_clear_master() to pdsc_teardown() to disable bus mastering before freeing resources, ensuring all DMA is quiesced. Add pci_set_master() to pdsc_setup() to re-enable bus mastering, which is needed for the firmware recovery path since pdsc_teardown() now disables it. | ||||