| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Don't add invalid kcontrols to LED layer
The kcontrol LED state layer tries to track the all associated
kcontrol elements with naive assumptions that they are readable.
But one can create a write-only element that has no get callback (even
a user element can do it), and this may lead to a NULL dereference at
the call chain of snd_ctl_led_notify(), as found by syzkaller.
For avoiding the Oops, add a sanity check of the kcontrol's info and
get callbacks, and just skip the invalid kcontrols before assigning
the kctl to the LED layer. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during blocked-lock reaping
A bare lock owner -- its only remaining reference a blocked lock on
nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but
no reference keeping the client alive. When the per-net laundromat
reaps such a lock, freeing the nbl drops the owner reference
held through flc_owner, and the final nfs4_put_stateowner()
takes the client's cl_lock. Because the laundromat detaches the
nbl first, __destroy_client() no longer finds it, so a concurrent
force_expire_client() can free the client before nfs4_put_stateowner()
runs, dereferencing cl_lock in freed memory.
Pin the client with cl_rpc_users before dropping
nn->blocked_locks_lock, and skip clients already expiring, whose
blocked locks __destroy_client() frees while holding an owner
reference. Take nn->client_lock outside nn->blocked_locks_lock.
Every other site holds nn->blocked_locks_lock as a leaf, acquiring
no further lock, so placing nn->client_lock outside it cannot form
a lock-order cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: clear forceRM when issuing EndTransfer
The forceRM bit of the DEPCMD register controls the behavior of the
EndTransfer command used to stop an active transfer. Older DWC3
programming guide revisions recommended setting forceRM=1 when
issuing EndTransfer. Newer programming guide revisions recommend
issuing EndTransfer with forceRM cleared.
With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer
aborted through the ep_dequeue path was observed to remain active
after EndTransfer completion. A subsequent StartTransfer issued on the
same endpoint triggered writes associated with the aborted transfer.
This resulted in an SMMU fault because the transfer buffer had already
been unmapped during EndTransfer command-completion cleanup.
Using forceRM=0 eliminates the issue. Although older DWC3 programming
guide revisions recommended setting forceRM=1, no issues are known
from using forceRM=0. Clear forceRM when issuing EndTransfer to provide
consistent EndTransfer behavior and align with newer programming guide
recommendations. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1)
The TLB entries on CPU #1 are never invalidated, because INVVPID was
executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e.
vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH).
Ensure that INVVPID is being executed on the same pCPU that L2 last ran
on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID
flush on the next nested VM-Enter (as KVM will detect L1 using a
different VPID for L2). If L2 ends up running on a different pCPU, KVM
will flush the TLB anyway through vmx_vcpu_load_vmcs(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Refactor jump offset calculation in tail call
The old macro-based jmp_offset calculation derives the jump distance
from a stale prior-pass code stride, which can lead to wrong branch
offsets and soft lockups under extra JIT passes.
Fix this by calculating the offset directly on the absolute target:
"ctx->offset[insn + 1] - ctx->idx".
To avoid a false 16-bit range check abort during size estimation, add
a "ctx->image == NULL" guard to inject a safe dummy offset. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op
Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(),
and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates
a region, so op->ops stays NULL for a successfully processed sparse map.
If a later op in the same job fails, the reverse unwind loop revisits that
op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally.
drm_gpuva_ops_free() dereferences its argument right away
(list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The
path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is
DRM_RENDER_ALLOW.
Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup()
already does for the identical free. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: emac: Fix NULL pointer dereference in emac_probe
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cookie AUTH state before use
When cookie authentication is disabled, COOKIE_ECHO restores fixed-size
AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM
length, HMAC list, or CHUNKS list can then reach association consumers
with lengths or identifiers that were never validated against the local
backing arrays.
A forged RANDOM length can cause out-of-bounds reads during key-vector
construction. A forged HMAC identifier also caused a 32-byte write past
a zero-length AUTH chunk, providing a primitive for a local privilege
escalation chain.
Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie
trust boundary before copying them into the association. Reject invalid
types, malformed lengths, unsupported HMAC identifiers, HMAC lists
without SHA1, and forbidden chunk ids. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: ohci: fix NULL pointer dereference in ar_context_release
During the error handling path of the driver's probe function, a NULL
pointer dereference can occur in ar_context_release().
When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping
fails), the devres cleanup mechanism invokes release_ohci(). This function
unconditionally calls ar_context_release() to clean up the asynchronous
receive contexts. However, if ar_context_init() was not yet called,
ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by
devres_alloc()).
ar_context_release() immediately dereferences ctx->ohci to get the dev
pointer before checking if the context was actually initialized, leading to
a crash:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543
Call Trace:
release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567
release_nodes drivers/base/devres.c:546 [inline]
devres_release_all+0x1a8/0x260 drivers/base/devres.c:576
device_unbind_cleanup drivers/base/dd.c:597 [inline]
really_probe+0x451/0xae0 drivers/base/dd.c:772
To fix this, move the assignment of the dev pointer after the !ctx->buffer
check. If ctx->buffer is NULL, it indicates that the context was never
successfully initialized and there is nothing to release, safely avoiding
the dereference of the uninitialized ctx->ohci pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: handle NULL b_addr in xfs_buf_free
When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with
bp->b_addr still NULL. The code falls through to the folio_put path
which calls virt_to_folio(NULL), dereferencing an invalid address and
causing a kernel crash.
Call Trace:
xfs_buf_free+0x25f/0x510
xfs_buf_alloc+0xc98/0x19b0
xfs_buf_find_insert+0x55/0x14d0
xfs_buf_get_map+0x122b/0x17c0
xfbtree_init_leaf_block+0x11c/0x4a0
xfbtree_init+0x1bb/0x460
xrep_rmap_setup_scan+0x100/0x1f0
xrep_rmapbt+0x41/0xc0
Fix this by skipping folio_put() when bp->b_addr is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Disable EOP for TPA on all chips to prevent data corruption
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption. |
