| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
On SP804, the delay timer shares the same clkevt instance with
sched_clock. On some platforms, when
sp804_clocksource_and_sched_clock_init is called with use_sched_clock
not set to 1, sched_clkevt is not properly initialized. However,
sp804_register_delay_timer is invoked unconditionally, and
read_current_timer() subsequently calls sp804_read on an uninitialized
sched_clkevt, leading to a kernel Oops when accessing
sched_clkevt->value.
Declare a dedicated clkevt instance exclusively for delay timer,
instead of sharing the same clkevt with sched_clock. This ensures
that read_current_timer continues to work correctly regardless of
whether SP804 is selected as the sched_clock. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: Avoid NULL dereference in linehandle_create()
In linehandle_create(), there is a statement like this:
retain_and_null_ptr(lh);
Soon after, there is a debug printout that dereferences "lh", which
will crash things.
Avoid the crash by using handlereq.lines, which is the same value. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bound access in fib6_add_rt2node().
syzbot reported out-of-bound read in fib6_add_rt2node(). [0]
When IPv6 route is created with RTA_NH_ID, struct fib6_info
does not have the trailing struct fib6_nh.
The cited commit started to check !iter->fib6_nh->fib_nh_gw_family
to ensure that rt6_qualify_for_ecmp() will return false for iter.
If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway.
Let's check iter->nh before reading iter->fib6_nh and avoid OOB read.
[0]:
BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500
CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline]
fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9316b9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9
RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003
RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0
</TASK>
Allocated by task 5499:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820
ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_s
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: wpcm-fiu: Fix potential NULL pointer dereference in wpcm_fiu_probe()
platform_get_resource_byname() can return NULL, which would cause a crash
when passed the pointer to resource_size().
Move the fiu->memory_size assignment after the error check for
devm_ioremap_resource() to prevent the potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
When probing the k230 pinctrl driver, the kernel triggers a NULL pointer
dereference. The crash trace showed:
[ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[ 0.740737] ...
[ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc
In k230_pinctrl_parse_functions(), we attempt to retrieve the device
pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized
after k230_pinctrl_parse_dt() completes.
At the time of DT parsing, info->pctl_dev is still NULL, leading to
the invalid dereference of info->pctl_dev->dev.
Use the already available device pointer from platform_device
instead of accessing through uninitialized pctl_dev. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition
Commit b7e282378773 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: shdlc: Stop timers and work before freeing context
llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc
structure while its timers and state machine work may still be active.
Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state
and the skb queues. If teardown happens in parallel with a queued/running
work item, it can lead to UAF and other shutdown races.
Stop all SHDLC timers and cancel sm_work synchronously before purging the
queues and freeing the context.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. |
| Out of bounds memory access in Skia in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebRTC in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PDF in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code inside a sandbox via a crafted PDF file. (Chromium security severity: High) |
| Insufficient policy enforcement in FoldableAPIs in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to bypass same origin policy via a crafted HTML page. (Chromium security severity: Low) |
| Inappropriate implementation in Passwords in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| Inappropriate implementation in FoldableAPIs in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| Heap buffer overflow in Media in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebRTC in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebRTC in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
