| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page pool leak in error paths
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
cxl_detach_ep() is called during bottom-up removal when all CXL memory
devices beneath a switch port have been removed. For each port in the
hierarchy it locks both the port and its parent, removes the endpoint,
and if the port is now empty, marks it dead and unregisters the port
by calling delete_switch_port(). There are two places during this work
where the parent_port may be used after freeing:
First, a concurrent detach may have already processed a port by the
time a second worker finds it via bus_find_device(). Without pinning
parent_port, it may already be freed when we discover port->dead and
attempt to unlock the parent_port. In a production kernel that's a
silent memory corruption, with lock debug, it looks like this:
[]DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current())
[]WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310
[]Call Trace:
[]mutex_unlock+0xd/0x20
[]cxl_detach_ep+0x180/0x400 [cxl_core]
[]devm_action_release+0x10/0x20
[]devres_release_all+0xa8/0xe0
[]device_unbind_cleanup+0xd/0xa0
[]really_probe+0x1a6/0x3e0
Second, delete_switch_port() releases three devm actions registered
against parent_port. The last of those is unregister_port() and it
calls device_unregister() on the child port, which can cascade. If
parent_port is now also empty the device core may unregister and free
it too. So by the time delete_switch_port() returns, parent_port may
be free, and the subsequent device_unlock(&parent_port->dev) operates
on freed memory. The kernel log looks same as above, with a different
offset in cxl_detach_ep().
Both of these issues stem from the absence of a lifetime guarantee
between a child port and its parent port.
Establish a lifetime rule for ports: child ports hold a reference to
their parent device until release. Take the reference when the port
is allocated and drop it when released. This ensures the parent is
valid for the full lifetime of the child and eliminates the use after
free window in cxl_detach_ep().
This is easily reproduced with a reload of cxl_acpi in QEMU with CXL
devices present. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n". |
| In the Linux kernel, the following vulnerability has been resolved:
ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: trace: fix snapshot deadlock with sbi ecall
If sbi_ecall.c's functions are traceable,
echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter
may get the kernel into a deadlock.
(Functions in sbi_ecall.c are excluded from tracing if
CONFIG_RISCV_ALTERNATIVE_EARLY is set.)
__sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code
raises an IPI interrupt, which results in another call to __sbi_ecall
and another snapshot...
All it takes to get into this endless loop is one initial __sbi_ecall.
On RISC-V systems without SSTC extension, the clock events in
timer-riscv.c issue periodic sbi ecalls, making the problem easy to
trigger.
Always exclude the sbi_ecall.c functions from tracing to fix the
potential deadlock.
sbi ecalls can easiliy be logged via trace events, excluding ecall
functions from function tracing is not a big limitation. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix misalignment bug in struct virtnet_info
Use the new TRAILING_OVERLAP() helper to fix a misalignment bug
along with the following warning:
drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it (in this case
`u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This
overlays the trailing members (rss_hash_key_data) onto the FAM
(hash_key_data) while keeping the FAM and the start of MEMBERS aligned.
The static_assert() ensures this alignment remains.
Notice that due to tail padding in flexible `struct
virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data`
(at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at
offset 84 in struct virtnet_info) are misaligned by one byte. See
below:
struct virtio_net_rss_config_trailer {
__le16 max_tx_vq; /* 0 2 */
__u8 hash_key_length; /* 2 1 */
__u8 hash_key_data[]; /* 3 0 */
/* size: 4, cachelines: 1, members: 3 */
/* padding: 1 */
/* last cacheline: 4 bytes */
};
struct virtnet_info {
...
struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */
/* XXX last struct has 1 byte of padding */
u8 rss_hash_key_data[40]; /* 84 40 */
...
/* size: 832, cachelines: 13, members: 48 */
/* sum members: 801, holes: 8, sum holes: 31 */
/* paddings: 2, sum paddings: 5 */
};
After changes, those members are correctly aligned at offset 795:
struct virtnet_info {
...
union {
struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */
struct {
unsigned char __offset_to_hash_key_data[3]; /* 792 3 */
u8 rss_hash_key_data[40]; /* 795 40 */
}; /* 792 43 */
}; /* 792 44 */
...
/* size: 840, cachelines: 14, members: 47 */
/* sum members: 801, holes: 8, sum holes: 35 */
/* padding: 4 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 8 bytes */
};
As a result, the RSS key passed to the device is shifted by 1
byte: the last byte is cut off, and instead a (possibly
uninitialized) byte is added at the beginning.
As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also
moved to the end, since it seems those three members should stick
around together. :) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails.
Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on a
valid netdev.
On mlx5e_remove: Check validity of priv->profile, before attempting
to cleanup any resources that might be not there.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000370
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100
RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286
RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0
RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10
R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0
R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400
FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_remove+0x57/0x110
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix error handling in the init_task on load
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491] <TASK>
[40958.179040] process_one_work+0x226/0x6d0
[40958.179609] worker_thread+0x19e/0x340
[40958.180158] ? __pfx_worker_thread+0x10/0x10
[40958.180702] kthread+0x10f/0x250
[40958.181238] ? __pfx_kthread+0x10/0x10
[40958.181774] ret_from_fork+0x251/0x2b0
[40958.182307] ? __pfx_kthread+0x10/0x10
[40958.182834] ret_from_fork_asm+0x1a/0x30
[40958.183370] </TASK>
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset. |
| In the Linux kernel, the following vulnerability has been resolved:
block: zero non-PI portion of auto integrity buffer
The auto-generated integrity buffer for writes needs to be fully
initialized before being passed to the underlying block device,
otherwise the uninitialized memory can be read back by userspace or
anyone with physical access to the storage device. If protection
information is generated, that portion of the integrity buffer is
already initialized. The integrity data is also zeroed if PI generation
is disabled via sysfs or the PI tuple size is 0. However, this misses
the case where PI is generated and the PI tuple size is nonzero, but the
metadata size is larger than the PI tuple. In this case, the remainder
("opaque") of the metadata is left uninitialized.
Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the
metadata is larger than just the PI tuple. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to
reference the netdev and mdev associated with that struct. Instead,
store netdev directly into mlx5e_dev and get mdev from the containing
mlx5_adev aux device structure.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000520
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_remove+0x68/0x130
RSP: 0018:ffffc900034838f0 EFLAGS: 00010246
RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10
R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0
R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400
FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0
Call Trace:
<TASK>
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_refcount field as unique
BPF_REFCOUNT is not marked as a unique field, while it should be. Fix
this oversight. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()
KASAN reported a stack-out-of-bounds access in ima_appraise_measurement
from is_bprm_creds_for_exec:
BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0
Read of size 1 at addr ffffc9000160f940 by task sudo/550
The buggy address belongs to stack of task sudo/550
and is located at offset 24 in frame:
ima_appraise_measurement+0x0/0x16a0
This frame has 2 objects:
[48, 56) 'file'
[80, 148) 'hash'
This is caused by using container_of on the *file pointer. This offset
calculation is what triggers the stack-out-of-bounds error.
In order to fix this, pass in a bprm_is_check boolean which can be set
depending on how process_measurement is called. If the caller has a
linux_binprm pointer and the function is BPRM_CHECK we can determine
is_check and set it then. Otherwise set it to false. |
