| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM.
While at it, use snd_sdw_params_to_config() helper instead of
open-coding the same logic. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown
hci_low_sent() selects a connection under RCU but drops the read lock
before calculating its quota and returning it to the scheduler. The
connection is then used without lifetime protection by hci_sched_iso()
and hci_sched_sco().
After the TX worker drops the RCU read lock, hci_abort_conn_sync() on
hdev->req_workqueue can remove the connection from the hash, complete
synchronize_rcu(), purge its queues and release it. The TX worker on
hdev->workqueue can then access the freed connection in hci_quote_sent()
or while dequeuing packets and updating conn->sent.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840
Workqueue: hci0 hci_tx_work
Call Trace:
hci_low_sent+0x730/0x840
hci_sched_iso+0x25e/0x4d0
hci_tx_work+0x239/0xcb0
Allocated by task 93:
__hci_conn_add+0x16f/0x1b40
hci_bind_bis+0x782/0x17b0
hci_connect_bis+0xa0/0x510
iso_sock_connect+0x589/0x1050
Freed by task 88:
kfree+0x131/0x3c0
device_release+0xc8/0x240
kobject_put+0x14d/0x280
hci_conn_del+0x55a/0xe80
hci_disconnect_sync+0x156/0x180
hci_abort_conn_sync+0x3e7/0x940
hci_cmd_sync_work+0x13c/0x290
Hold hci_dev_lock() across connection selection and transmission in both
SCO and ISO scheduling, serializing them with connection teardown. This
also prevents queuing completion timestamps after the connection queues
have been purged. Extending RCU across transmission would be unsafe
because the transmit path can sleep. Keep the ISO timeout check outside
the mutex since hci_link_tx_to() takes it itself.
The preceding channel fix already holds this mutex in the ACL and LE
schedulers, which call the SCO scheduler between packets. Move the SCO
body to __hci_sched_sco(), assert that its caller holds the mutex, and
use it directly from these locked paths. Keep a locking hci_sched_sco()
wrapper for the direct calls from hci_tx_work(). This avoids recursively
acquiring the device mutex while preserving the scheduling order.
Remove the obsolete claim that connection removal disables TX. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy
When walking shadow page tables, immediately terminate the walk if the root
is a "dummy" root, i.e. a root whose top-level page table is backed by the
zero page, but otherwise doesn't exist. If memslot creation races with a
stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align,
KVM will attempt to walk shadow page tables using the zero page and hit a
NULL pointer deref.
BUG: kernel NULL pointer dereference, address: 0000000000000021
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm]
Call Trace:
<TASK>
kvm_mmu_invalidate_addr+0x92/0xe0 [kvm]
__kvm_inject_emulated_page_fault+0x67/0x80 [kvm]
ept_page_fault+0x160/0x850 [kvm]
kvm_mmu_do_page_fault+0x102/0x1f0 [kvm]
kvm_mmu_page_fault+0x8e/0x6b0 [kvm]
vmx_handle_exit+0x163/0x640 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f606d0b53bb
Opportunistically harden the shadow walks against fully invalid roots, but
WARN, as all callers are expected/required to pre-check for a valid root.
Don't WARN in the dummy root case as the whole point of using a dummy root
is to provide a root that's valid enough to enter the guest, i.e. it should
Just Work for all flows except those that *need* to know about dummy roots.
Alternatively, KVM could allocate a dedicated page and associated shadow
page structure for the dummy root, which is very tempting as it such an
approach should be more resilient against unexpected behavior. But that
would be a much larger and thus riskier change than simply terminating
walks of dummy roots. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix mesh fast xmit path deletion UAF
mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion
flushes the cache and then frees the path with kfree_rcu(), but a
lookup that already holds the path can insert a new cache entry
after the flush. The cache then points at freed memory.
Set MESH_PATH_DELETED before flushing, and skip inserting a cache
entry if the path or MPP path is already deleted. Check this under
the cache walk lock so it is ordered with the flush. Use WRITE_ONCE()
for the deletion flag updates because the cache check reads flags
without taking state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handler and return early
unless it reports a FIFO sample is ready. Because FIFO_RDY is the only
interrupt source enabled in max30102_chip_init(), an invocation of
max30102_interrupt_handler() without the FIFO_RDY interrupt status bit
set carries no data to read and can return before touching
active_scan_mask. A negative return from max30102_fifo_count()
indicates a failed interrupt status read and is treated the same way. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix IOPF group ownership UAF
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the helper function is valid in get_helper_proto
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
__xa_store() and __xa_erase() were used without holding the proper lock,
which led to a lockdep warning due to unsafe RCU usage. This patch
replaces them with xa_store() and xa_erase(), which perform the necessary
locking internally.
=============================
WARNING: suspicious RCPU usage
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted
-----------------------------
./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/u136:0/219:
at: process_one_work+0xbe4/0x15f0
process_one_work+0x75c/0x15f0
pagefault_mr+0x9a5/0x1390 [mlx5_ib]
stack backtrace:
CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
Call Trace:
dump_stack_lvl+0xa8/0xc0
lockdep_rcu_suspicious+0x1e6/0x260
xas_create+0xb8a/0xee0
xas_store+0x73/0x14c0
__xa_store+0x13c/0x220
? xa_store_range+0x390/0x390
? spin_bug+0x1d0/0x1d0
pagefault_mr+0xcb5/0x1390 [mlx5_ib]
? _raw_spin_unlock+0x1f/0x30
mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib]
process_one_work+0x7db/0x15f0
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x57d/0xcd0
? rescuer_thread+0xc40/0xc40
kthread+0x3b3/0x800
? kthread_is_per_cpu+0xb0/0xb0
? lock_downgrade+0x680/0x680
? do_raw_spin_lock+0x12d/0x270
? spin_bug+0x1d0/0x1d0
? finish_task_switch.isra.0+0x284/0x9e0
? lockdep_hardirqs_on_prepare+0x284/0x400
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork+0x2d/0x70
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork_asm+0x11/0x20 |
