| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in D-Link DWR-M921 1.1.52. This impacts the function formWsc of the file /boafrm/formWsc. The manipulation of the argument targetAPSsid leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A memory corruption issue was addressed with improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A security vulnerability has been detected in webgjc web_robot 2.4.0/2.5.0/2.8.0. The affected element is the function controller_listen/controller_recover of the file py/web.py. The manipulation of the argument case_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in GH05TCREW PentestAgent up to cf882dabea3ed91cef016cdd115e5426315665a2. This issue affects the function LocalRuntime.execute_command of the file runtime/runtime.py of the component LocalRuntime. Executing a manipulation can lead to os command injection. The attack may be performed from remote. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| ntop nDPI versions before 6.0 contain a heap buffer overflow vulnerability in the ndpi_json_string_escape function that writes beyond caller-supplied buffer boundaries. Attackers can trigger the overflow by supplying crafted network packet data including TLS SNI, HTTP headers, or DNS names that reach the vulnerable function, causing heap corruption. |
| Description
The worker's Netty message decoder is installed ahead of the SASL authentication handlers in the pipeline
and acts on frames before any authentication has taken place. It allocated buffers sized from a
length field carried in the frame, so a single frame from an unauthenticated peer able to reach a worker
slot port could drive a large allocation.
`storm.messaging.netty.authentication` defaults to false, and the decoder runs before the handler that
enforces it in any case, so no credentials are required. The attacker needs only TCP reachability to a
worker port.
The effect of a single frame at the default 768 MB worker heap has not been measured to distinguish
sustained worker loss from transient garbage-collection pressure. The severity assigned to this advisory
reflects the more conservative reading; consumers who require a precise figure should test against their own
worker heap configuration.
Mitigation
Upgrade to 3.1.0, where frames are decoded only after the handshake completes.
Users who cannot upgrade immediately should ensure that worker slot ports are reachable only from within the
cluster, as the security model already recommends, and should enable
`storm.messaging.netty.authentication` where the deployment permits it.
Credit
The ASF -- found using Claude agents to study the security of open-source projects, validated and reported by Apache Storm. |
| Calling tdelete on a sufficiently deep tree in the GNU C Library version 2.1 to 2.44 may write one pointer past the end of an alloca-allocated array on the stack, which may crash the application.
The tdelete implementation keeps an explicit stack of parent nodes for rebalancing, which is grown as needed while descending the tree. Two rebalancing branches push an additional entry without checking the capacity, and write past the array when the stack is exactly full. Triggering this requires a node at a depth of exactly 40 (or 40 plus a multiple of 20), which implies a tree with at least a million nodes, so an attacker must drive a large number of insertions and deletions through an application that uses tsearch and tdelete. The written value is a pointer into a tree node and is not directly attacker controlled. No affected application in common distributions has been identified. |
| Calling strfmon and strfmon_l in the GNU C Library version 2.38 to 2.44 can write past the end of the caller-supplied output buffer when a conversion uses right-justified width padding.
Exploitation requires an application code path that calls strfmon or strfmon_l with right-justified width padding into a destination buffer that is large enough for the padding to succeed but too small for the internal memmove call. The field width or format may be attacker-influenced or a fixed susceptible pattern in the caller.
At the time of publication, no network-facing application impact is known. |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review. |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review. |
| snappy-java through 1.1.10.8 contains an out-of-bounds write vulnerability in Snappy.uncompress(ByteBuffer, ByteBuffer) because destination buffer capacity is never validated against decompressed size. Attackers can supply valid compressed data that decompresses larger than the destination buffer, causing writes past buffer boundaries and JVM termination. |
| libde265 is an open source implementation of the h.265 video codec. Versions prior to 1.1.1 use signed 32-bit arithmetic to calculate pixel offsets, allowing a crafted HEVC stream with large image dimensions to trigger an integer overflow and cause out-of-bounds heap reads or writes, potentially disclosing data, corrupting memory, or crashing the decoder. Version 1.1.1 contains a patch. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A vulnerability has been identified in Reyrolle 7SR5 (All versions < V2.70). The input received over a proprietary communication protocol that is exposed when the device is placed into a special firmware-update mode is not properly validated, resulting in a memory corruption condition. This could allow an unauthenticated attacker with physical access to the device to cause a crash and potentially execute arbitrary code on the device. |
| shell-quote's `quote()` function did not validate object-token inputs against the operator model used by `parse()`. The `.op` field was backslash-escaped character by character using `/(.)/g`, which in JavaScript does not match line terminators (\n, \r, U+2028, U+2029). A line terminator in `.op` therefore passed through unescaped into the output; POSIX shells treat a literal newline as a command separator, so any content after it would execute as a second command. The vulnerable code path is reachable in two ways: (1) direct construction of `{ op: '...\n...' }` from external input, and (2) via `parse(cmd, envFn)` when `envFn` returns object tokens whose `.op` is attacker-influenced. Both are documented API surface. Fixed by replacing the per-character escape with strict shape validation: `.op` must match the parser's control-operator allowlist; `{ op: 'glob', pattern }` validates `pattern` and forbids line terminators; `{ comment }` validates `comment` and forbids line terminators; any other object shape throws `TypeError`. |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server.
If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer.
This issue affects Apache HTTP Server: through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: keyspan_pda: fix information leak
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
sensor_hub_get_feature() clamps its return value to the caller's buffer
size, but the copy loop still copies field->report_size / 8 bytes for
each report value. A malicious HID descriptor can advertise a large
feature field size while an IIO caller supplies a small stack buffer,
such as a single s32, causing an out-of-bounds write.
HID core stores parsed report values in __s32 slots and clamps extracted
values to 32 bits. Reject feature fields that require more than one slot
per value, guard the total byte count calculation, and clamp each
per-value copy to the remaining caller buffer. |
