| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10 |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/fork: clear PF_BLOCK_TS in copy_process()
PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is
non-NULL, and blk_finish_plug() clears it via __blk_flush_plug()
before NULLing the plug pointer. copy_process() breaks the
invariant by inheriting PF_BLOCK_TS from the parent while resetting
the child's plug to NULL.
Clear PF_BLOCK_TS alongside that assignment so callers can rely on
"PF_BLOCK_TS set implies current->plug != NULL" and dereference
current->plug unguarded. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ice1712: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails. The
ice1712 driver calls snd_ctl_new1() without checking the return value
before dereferencing the pointer in multiple places (ice1712.c,
ice1724.c, aureon.c), which can lead to NULL pointer dereferences.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ
handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to
calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the
serial core).
However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()
unconditionally attempt to acquire port->lock again using
uart_port_lock_irqsave(). Since spinlocks are not recursive, this
causes a deadlock on the same CPU when console flow control is engaged.
Remove the redundant lock acquisition from both rx helper functions. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es1938: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_es1938_mixer() does not check the return value before dereferencing
the pointer, which can lead to a NULL pointer dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: free scan_mask on buffer release
The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer:
hw-consumer: remove redundant scan_mask flexible array").
Before that change, the scan mask storage was embedded in struct
hw_consumer_buffer, so iio_hw_buf_release() could free the whole
allocation with a single kfree(hw_buf).
That commit moved the scan mask to a separate bitmap_zalloc() allocation
stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged.
Free the scan mask in iio_hw_buf_release() before freeing the buffer
wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ymfpci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_ymfpci_create_spdif_controls() does not check the return value
before dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix possible NULL pointer dereference
After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler
for the NFIT device before checking the presence of the NFIT table. If
that table is not there, 0 is returned without allocating the acpi_desc
object and setting the driver data pointer of the NFIT device. If the
platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification
on the NFIT device at that point, acpi_nfit_uc_error_notify() will
dereference a NULL pointer.
Prevent that from occurring by adding an acpi_desc check against NULL
to acpi_nfit_uc_error_notify(). |
| Use after free in Views in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate VMBus packet size in receive callback
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback(). |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: fix ring sg table pages leak
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: cmipci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_cmipci_spdif_controls() does not check the return value before
dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space). |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf()
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: mediate the implicit connect of TCP fast open sendmsg
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
