| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine
ksmbd_crypt_message() sets a NULL completion callback on AEAD requests
and does not handle the -EINPROGRESS return code from async hardware
crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns
-EINPROGRESS, ksmbd treats it as an error and immediately frees the
request while the hardware DMA operation is still in flight. The DMA
completion callback then dereferences freed memory, causing a NULL
pointer crash:
pc : qce_skcipher_done+0x24/0x174
lr : vchan_complete+0x230/0x27c
...
el1h_64_irq+0x68/0x6c
ksmbd_free_work_struct+0x20/0x118 [ksmbd]
ksmbd_exit_file_cache+0x694/0xa4c [ksmbd]
Use the standard crypto_wait_req() pattern with crypto_req_done() as
the completion callback, matching the approach used by the SMB client
in fs/smb/client/smb2ops.c. This properly handles both synchronous
engines (immediate return) and async engines (-EINPROGRESS followed
by callback notification). |
| In the Linux kernel, the following vulnerability has been resolved:
VFS: fix possible failure to unlock in nfsd4_create_file()
atomic_create() in fs/namei.c drops the reference to the dentry
when it returns an error.
This behaviour was imported into dentry_create() so that it
will drop the reference if an error is returned from atomic_create(),
though not if vfs_create() returns an error (in the case where
->atomic_create is not supported).
The caller - nfsd4_create_file() - is made aware of this by checking
path->dentry, which will either be a counted reference to a dentry, or
an error pointer.
However the change to use start_creating()/end_creating() (which landed
shortly before the dentry_create() change landed, though was likely
developed around the same time) means that nfsd4_create_file() *needs* a
valid dentry so that it can unlock the parent.
The net result is that if NFSD exports a filesystem which uses
->atomic_create, and if a call to ->atomic_create returns an error, then
nfsd4_create_file() will pass an error pointer to end_creating()
and the parent will not be unlocked.
Fix this by changing dentry_create() to make sure path->dentry is always
a valid dentry, never an error-pointer. The actual error is already
returned a different way.
Note that if ->atomic_create() returns a different dentry (which may not
be possible in practice) we are guaranteed (because it is only ever
provided by d_spliace_alias()) that it will have the same d_parent and
so it will have the same effect when passed to end_creating(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: fix integer overflow in AFBC framebuffer size check
The AFBC framebuffer size validation calculates the minimum required
buffer size by adding the AFBC payload size to the framebuffer offset.
This addition is performed without checking for integer overflow.
If the addition oveflows, the size check may incorrectly succed and
allow userspace to provide an undersized drm_gem_object, potentially
leading to out-of-bounds memory access.
Add usage of check_add_overflow() to safely compute the minimum
required size and reject the framebuffer if an overflow is detected.
This makes the AFBC size validation more robust against malformed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context
There is a race between fastrpc_device_release() and the workqueue
that processes DSP responses. When the user closes the file descriptor,
fastrpc_device_release() frees the fastrpc_user structure. Concurrently,
an in-flight DSP invocation can complete and fastrpc_rpmsg_callback()
schedules context cleanup via schedule_work(&ctx->put_work). If the
workqueue runs fastrpc_context_free() in parallel with or after
fastrpc_device_release() has freed the user structure, it dereferences
the freed fastrpc_user. Depending on the state of the context at the
time of the race, any one of the following accesses can be hit:
1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...)
to strip the SID bits from the stored IOVA before passing the
physical address to dma_free_coherent().
2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to
reconstruct the source permission bitmask needed for the
qcom_scm_assign_mem() call that returns memory from the DSP VM
back to HLOS.
3. fastrpc_free_map() acquires map->fl->lock to safely remove the
map node from the fl->maps list.
The resulting use-after-free manifests as:
pc : fastrpc_buf_free+0x38/0x80 [fastrpc]
lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc]
fastrpc_context_free+0xa8/0x1b0 [fastrpc]
fastrpc_context_put_wq+0x78/0xa0 [fastrpc]
process_one_work+0x180/0x450
worker_thread+0x26c/0x388
Add kref-based reference counting to fastrpc_user. Have each invoke
context take a reference on the user at allocation time and release it
when the context is freed. Release the initial reference in
fastrpc_device_release() at file close. Move the teardown of the user
structure — freeing pending contexts, maps, mmaps, and the channel
context reference — into the kref release callback fastrpc_user_free(),
so that it runs only when the last reference is dropped, regardless of
whether that happens at device close or after the final in-flight
context completes. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds
PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue)
and returns early. However, because the function returns void, the
callers are entirely unaware that a fatal error has occurred and
that the cmd->recv_msg.msg_iter was left uninitialized.
Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly
overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA
Consequently, the socket receiving loop may attempt to read incoming
network data into the uninitialized iterator.
Fix this by shifting the error handling responsibility to the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: anycast: insert aca into global hash under idev->lock
syzbot reported a splat [1]: a slab-use-after-free in
ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash
under RCU and dereferences a struct ifacaddr6 that has already been
freed while still linked in the hash, so a later reader walks into a
dangling node.
In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then
aca_get() bumps it to 2 to keep it alive across the unlocked region.
It is published to idev->ac_list under idev->lock, but
ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent
teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL)
can slip into that window:
CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL)
------------------------------ ------------------------------------
aca_alloc() refcnt 1
aca_get() refcnt 2
write_lock_bh(idev->lock)
add aca to ac_list
write_unlock_bh(idev->lock)
write_lock_bh(idev->lock)
pull aca off ac_list
write_unlock_bh(idev->lock)
ipv6_del_acaddr_hash(aca)
hlist_del_init_rcu() is a no-op,
aca is not in the hash yet
aca_put() refcnt 2->1
ipv6_add_acaddr_hash(aca)
aca now inserted into the hash
aca_put() refcnt 1->0
call_rcu(aca_free_rcu) -> kfree(aca)
The hash removal becomes a no-op because the insertion has not
happened yet, so once CPU0 inserts and drops the last reference, the
aca is freed while still linked in inet6_acaddr_lst[], and readers
dereference freed memory after the slab slot is reused.
This window opened once RTNL stopped serializing the join path against
device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock
section so the ac_list and hash insertions are atomic with respect to
teardown: a racing remover now either misses the aca entirely or finds
it in both lists.
acaddr_hash_lock is now nested under idev->lock, which is acquired in
softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh()
to avoid the irq lock inversion reported in [2].
[1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a
[2] https://lore.kernel.org/netdev/6a194ef7.ba3b1513.1890b4.0000.GAE@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
__input_process_payload() stores first_skb into xtfs->ra_newskb under
drop_lock when starting partial reassembly, then unlocks and breaks out
of the processing loop. The post-loop check reads xtfs->ra_newskb
without the lock to decide whether first_skb is still owned:
if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb)
Between spin_unlock and this read, a concurrent CPU running
iptfs_reassem_cont() (or the drop_timer hrtimer) can complete
reassembly, NULL xtfs->ra_newskb, and free the skb. The check then
evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb
operate on the freed skb — a use-after-free in skbuff_head_cache.
Replace the unlocked read with a local bool that records whether
first_skb was handed to the reassembly state in the current call. The
flag is set after the existing spin_unlock, before the break, using the
pointer equality that is stable at that point (first_skb == skb iff
first_skb was stored in ra_newskb). |
| In the Linux kernel, the following vulnerability has been resolved:
net: add pskb_may_pull() to skb_gro_receive_list()
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: limit XDP frame size to the RX buffer
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX
XN has already been extracted from its bitfield position so using
FIELD_PREP() on the mask that clears XN[0] is completely broken, having
the effect of unconditionally granting execute permissions...
Fix the obvious mistake by manipulating the right bit. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: keep err zero after successful ovl_cache_get()
ovl_iterate_merged() stores PTR_ERR(cache) in err before checking
IS_ERR(cache). On success err holds the truncated cache pointer and
can be returned as a bogus non-zero error.
The syzbot reproducer reaches this through overlay-on-overlay readdir:
getdents64
iterate_dir(outer overlay file)
ovl_iterate_merged()
ovl_cache_get()
ovl_dir_read_merged()
ovl_dir_read()
iterate_dir(inner overlay file)
ovl_iterate_merged()
Only compute PTR_ERR(cache) on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate()
The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller. |
