| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Check write tracking in all address spaces
kvm_gfn_is_write_tracked() checks only the supplied memslot, but page
tracking is per-address-space and shadow pages are shared across all
address spaces. With SMM, a GFN can therefore be write-tracked in one
address space and appear untracked through the other.
Check the supplied slot first, then the slot for the other address space.
This ensures all callers honor write tracking regardless of the active
address space. In particular, it prevents mmu_try_to_unsync_pages() from
marking an upper-level shadow page unsync and eventually triggering the
BUG in pte_list_remove().
[invert direction of the conditional. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Avoid iteration of dying tasks with zero refcount
The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from
cgroup_task_release() to cgroup_task_free()") extended the lifetime of
tasks on the dying_tasks list.
The iterators have provision to go through dying_tasks because of
dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however,
it was expected that such tasks can obtain a new reference (that is
possible before cgroup_task_release()/put_task_struct_rcu_user()).
The tasks after cgroup_task_release() and before cgroup_task_free()
are subject to race when they may or may not have ->usage count > 0.
The race window is between css_task_iter_next() invocations
when css_set_lock is released and we may arrive at a new ->task_pos.
The iterator should not attempt to resurrect tasks whose ->usage count
dropped to zero. (When that happens, __put_task_struct_rcu_cb() is
already imminent and the returned task_struct would could be used
after free.)
As for the fix, we cannot simply check the signal->live count of a task
on the dying list because that won't distinguish regular zombies waiting
to be reaped from RCU remnant tasks that are going to be free'd.
Therefore add an extra check to rule out ->usage==0 tasks from any
iteration.
The repeat: loop in css_task_iter_advance() doesn't consider ->usage
count, so add a new loop to css_task_iter_next() to skip de-used tasks
on the dying_list.
Rough illustration of the possible race
R (reader of cgroup.procs) T (thread) L (group leader)
--------------------------------- -------------------------------- --------------------------------
L exits, signal->live > 0
cgroup_task_dead(L)
css_set_skip_task_iters() // skips only cset->tasks
list_add_tail(&L->cg_list, &cset->dying_tasks)
css_task_iter_next()
take css_set_lock
css_task_iter_advance()
leader && signal->live != 0
=> it->task_pos = &L->cg_list
release css_set_lock
T exits
--signal->live == 0
cgroup_task_dead(T) // css_set_lock
release_task(T)
cgroup_task_release(T)
release_task(L) // zap_leader
cgroup_task_release(L)
put_task_struct_rcu_user(L)
...RCU...
put_task_struct(L)
L->usage = 0
/* L still on dying_tasks */
...RCU...
__put_task_struct(L)
css_task_iter_next() // another iteration
take css_set_lock
it->task_pos = &L->cg_list
get_task_struct(L)
=> addition on 0
drop css_set_lock
cgroup_task_free(L)
css_set_skip_task_iters() // dying skip comes too late
free_task(L)
cgroup_procs_show()
task_pid_vnr(L) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix out-of-bounds read in P2P public action frames
wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once
ieee80211_is_public_action() returns true. That helper only verifies the
frame is long enough for the action category field, that is
offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both
functions then read the P2P public action header up to oui_subtype at
offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where
ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32.
A public action frame of 25 to 31 bytes passes the check but is shorter
than that 32 byte header, so oui_subtype can be read out of bounds, and
because the length is unsigned, "size - ie_offset" underflows to a value
close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length,
so even the size_t subtraction in mgmt_tx() is truncated to the same
value. It then walks far past the buffer searching for a vendor element
until it reaches unmapped memory.
In the receive path the frame arrives over the air and needs no
association, so a nearby unauthenticated device can crash the host while
it is in P2P listen. Reject frames shorter than the P2P public action
header in both paths before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: release runtime PM ref on regdomain config failure
wlcore_regdomain_config() gets a runtime PM reference before sending
the regulatory-domain command. When
wlcore_cmd_regdomain_config_locked() fails, the function queues recovery
and returns without dropping that reference.
Release the reference after handling the command result so both success
and failure paths balance the preceding
pm_runtime_resume_and_get(). The recovery worker takes a separate
runtime PM reference and cannot release the reference held here. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pwm-fan) Stop RPM timer before freeing tach data
sample_timer() rearms the RPM timer and accesses the devm-managed
ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action
which stops the timer is registered before those arrays are allocated.
Since devres releases entries in reverse order, driver detach can free
the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry
in that window accesses the freed tach data.
With a KASAN kernel, a test-only kprobe delayed entry to
pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs
reported three four-byte reads and two four-byte writes in sample_timer()
after its backing devm allocations had been freed. The helper did not
invoke the timer callback, cleanup actions or free functions.
With the fix, three matching unbind runs completed without KASAN, BUG,
WARNING, Oops or panic. Instrumentation confirmed that timer retirement
completed before the first timer backing allocation was released.
Split timer retirement from the power cleanup and register its devres
action after the timer backing data and IRQ actions are installed. This
preserves the early power rollback action while ensuring the timer is
retired before its backing data is released. Use timer_shutdown_sync()
because the callback can rearm itself. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix NULL sched deref in kfunc sub-sched error paths
When the root scheduler has sub-scheds attached, the COMPAT kfunc
wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse
the call and report to @p's scheduler:
scx_error(scx_task_sched(p), "... must be used");
The wrappers are reachable with tasks that have no scheduler.
scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which
scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs;
scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which
ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the
group has no kf_tasks validation, and scx_dsq_insert_preamble() checks
task ownership with scx_task_on_sched() precisely because @p may be an
arbitrary task.
scx_task_sched(p) is p->scx.sched, which is NULL for tasks past
sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on
exit -- and for idle tasks, which the enable paths skip as they are
never scheduled through SCX. It is also an rcu_dereference_protected()
that expects @p's pi_lock or rq lock, which neither wrapper holds.
Passing NULL to scx_error() reaches scx_vexit(), which dereferences
sch->exit_info, oopsing the kernel.
One concrete trigger exercised while developing the fix: a
BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an
exited-but-not-reaped task while a sub-scheduler was attached (its pid
stays findable while the zombie is unreaped; faulting instruction is
the scx_vexit() prologue "mov r15,[rdi+0x398]" with RDI=NULL and 0x398
the offset of sch->exit_info):
sched_ext: BPF scheduler "kfunc_subsched_null" enabled
sched_ext: BPF sub-scheduler "kfunc_subsched_null" enabled
sched_ext: Unassociated program run_select_cpu_ (id 76)
BUG: kernel NULL pointer dereference, address: 0000000000000398
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 8201 Comm: kfunc_test_runn Tainted: G W
RIP: 0010:scx_vexit+0x25/0xa0
Code: ... <4c> 8b bf 98 03 00 00 ...
CR2: 0000000000000398
Call Trace:
<TASK>
__scx_exit+0x4f/0x70
scx_bpf_select_cpu_and+0xab/0xb0
bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7
? __x64_sys_bpf+0x2c/0x40
bpf_prog_test_run_syscall+0x130/0x2f0
__sys_bpf+0x930/0x10d0
? __x64_sys_bpf+0x2c/0x40
__x64_sys_bpf+0x2c/0x40
do_syscall_64+0xbc/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Read @p's scheduler under RCU instead, which the wrappers can do from
their guard(rcu)(): fault it when it can be determined, and when it
can't be determined -- @p is a task past sched_ext_dead() or an idle
task -- there is nothing obviously wrong to report, so just refuse the
call as before without faulting any scheduler.
These COMPAT wrappers are scheduled for eventual removal once the
deprecation grace period elapses, but until then -- and regardless of
their removal timeline -- they must not oops the kernel on a task they
are handed. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: percpu: Fix LSE operations on {8,16}-bit types
The assembly for __percpu_##name##_case_##sz() and
__percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro
argument to form the LSE instruction. Without 'sfx', a W register
argument will imply a 32-bit memory location, and consequently
{8,16}-bit ops will erroneously read and write 32 bits of memory when
the LSE instruction is used.
Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not
necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is
a register-register operation which does not access memory (and does not
take a size suffix). |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: ring the doorbell if a burst ends in a drop
fbnic_tx_map() skips the doorbell write, and the completion request,
for every packet handed to it with xmit_more set, counting on the
packet which ends the burst to publish them all. When that packet is
dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping
failure - nothing rings. The descriptors of the preceding packets stay
invisible to the HW until the next transmit on that queue, which for a
burst-then-idle workload may never come.
Remember the meta descriptor of the last packet left without a doorbell
and flush it from the error paths. The completion request has to be set
on that descriptor rather than simply writing the tail, otherwise the HW
would transmit the packets but never report a head, and the ring would
fill up and stall for good.
This is very similar to Joe's recent series of fixes for bnxt.
Not seen in real life, reproduced under QEMU with failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: fix broadcast stations deallocation
On the error path of __il4965_up(), il_dealloc_bcast_stations() clears
only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the
same broadcast stations to be deallocated again by __il4965_down().
This can occur when RF_KILL is toggled during driver startup.
To fix clear the entire 'used' field, since we will not do any
other operations on the station. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x->xso.dev
xfrm_state_gc_destroy(x)
xfrm_dev_state_free(x)
xfrm_state_free(x)
continue xfrm_dev_state_free(x)
Both paths can invoke the driver callback and drop the device reference.
CPU 0 can also access the xfrm_state after CPU 1 has freed it.
KASAN reported:
BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0
Read of size 8 at addr ffff88810bbaa960 by task poc/102
Call Trace:
xfrm_dev_state_free+0x24c/0x2a0
xfrm_dev_state_flush+0x353/0x400
xfrm_dev_event+0x26d/0x3a0
notifier_call_chain+0xc0/0x280
__dev_notify_flags+0x169/0x250
netif_change_flags+0xe7/0x160
dev_change_flags+0x96/0x220
devinet_ioctl+0x7f4/0x1880
Allocated by task 87:
xfrm_state_alloc+0x1e/0x5c0
xfrm_add_sa+0xe7f/0x5820
xfrm_user_rcv_msg+0x4f3/0x940
Freed by task 57:
kmem_cache_free+0xcb/0x3d0
xfrm_state_gc_task+0x4a8/0x650
process_one_work+0x63a/0x1070
Serialize xfrm_state destruction against the deferred-device pass with a
mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain
the existing callback and device-reference release ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release tail references on DELACTION failure
A batched RTM_DELACTION request takes a temporary reference on each
action before attempting any deletion. tcf_action_delete() clears
each processed slot and drops its temporary reference before attempting
the deletion. If deletion fails, tca_action_gd() calls
tcf_action_put_many() to release the remaining references, but its
tcf_act_for_each_action() iterator stops at the first NULL slot.
When a batch stops at an action bound to a filter, this leaks a
reference on each subsequent action. A later delete of an unbound
action can then return success without removing it from the IDR.
Walk the full array in tcf_action_put_many() and skip NULL slots to
release the references held on the unprocessed actions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is
zero. Nothing requires the offsets to advance, so a modem that
points an NDP at itself, or at an earlier NDP, keeps the loop
spinning forever on one CPU.
Break out when the next NDP offset is not larger than the current
one.
Verified in a QEMU guest with a fault injector feeding the driver's
receive callback an NTB whose single NDP points at itself: the
unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100%
and the thread never returns. With this check the loop terminates
within one iteration.
Changes in v2: move the non-increasing check to the wNextNdpIndex
retrieval site, as suggested by Loic Poulain, instead of tracking
the previous offset in a separate variable. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: rt712-sdca-dmic: fix uninitialized stream_config->type
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM.
While at it, use snd_sdw_params_to_config() helper instead of
open-coding the same logic. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb()
PSP conflicts with TLS ULP in its usage of both skb->decrypted and
sk->sk_validate_xmit_skb().
Make PSP mutually exclusive with TLS ULP, the only other user of either
of these. As other users of skb->decrypted come along, they can be added
to sk_has_decrypt_user(). It would make sense to also assert that
sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for
similar future proofing, but the PSP listener/sk_clone() path is still
broken and it could be seen as a regression to not allow rx assoc to run
on a child of a listener socket with PSP tx assoc state.
Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS
is the only one that conflicts with PSP via the decrypted bit. This is
intentional because PSP was not designed to be used with ULPs. It is
best to close off surface area that may make bugs reachable, until
someone wishes to design and test an actual user of PSP with ULPs. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix server->total_read for compound encrypted PDUs
In receive_encrypted_standard(), server->total_read is left at the
full decrypted frame size when walking sub-PDUs of a compound encrypted
frame. As a result, cifs_handle_standard() passes this full size
to smb2_check_message(), causing the PDU length guards to incorrectly
validate the entire compound frame instead of the current sub-PDU.
This allows truncated non-last sub-PDUs to bypass length validation,
leading to out-of-bounds reads in smb2_get_data_area_len().
Fix this by setting server->total_read to the true length of the
current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining
pdu_length for the last one. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: exclude old ACKs from tcp fast path
Exclude old ACKs before SND.UNA from the tcp fast path
as well as ACKs after SND.NXT.
Such ACKs will fall through to the slow path, where tcp_ack()
performs the appropriate validation and challenge ACK handling
according to RFC5961 and Commit 3d501dd326fb1c7 ("tcp: do not
accept ACK of bytes we never sent").
This prevents old ACKs from being accepted
or modifying connection state as part of the fast path before
appropriate ACK validation is applied.
In particular, this prevents payload carried by a segment with
an excessively old ACK from advancing RCV.NXT before the ACK
is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error. |
