| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Make the DP tunnel activation callback mandatory
tb_tunnel_alloc_dp() takes an optional callback which is run from
dprx_work once the DPRX capabilities read has completed. Without that
callback tb_dp_dprx_start() reads the capabilities synchronously and
never queues the work. It however always takes a tunnel reference which
is only dropped by dprx_work itself or by tb_dp_dprx_stop() when
cancel_delayed_work() actually canceled that work. That reference is
thus leaked for every tunnel without a callback.
The only tunnels without one are those from tb_tunnel_discover_dp(),
which are activated again when restoring from hibernation.
Pass the callback to tb_tunnel_discover_dp() as well and drop the
synchronous path such that the DPRX capabilities are always read from
dprx_work. Hibernation restore then also no longer blocks for up to 12
seconds while waiting for that read to complete.
Also fix up the KUnit tests. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching()
unregister_fprobe() and unregister_fprobe_async() (used by BPF
kprobe-multi) rely on standard RCU grace periods (synchronize_rcu()
and call_rcu()) to wait until in-flight fprobe handlers complete before
freeing the fprobe.
However, if an fprobe handler executes while RCU is not watching (such
as in the idle loop or nohz_full extended quiescent states), standard
RCU does not track preemption-disabled sections. Consequently,
synchronize_rcu() does not wait for those executions, which can lead
to a use-after-free if the fprobe is freed immediately after
unregistration. Ensure handlers exit early when !rcu_is_watching().
Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously
used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every
hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep
recursion if probed functions interact with lockdep.
Since rhltable_lookup() and rhl_for_each_entry_rcu() use
rcu_dereference_all_check() (which checks rcu_read_lock_any_held()),
holding preemption disabled via rcu_read_lock_sched_notrace() is fully
valid and sufficient so long as rcu_is_watching() is true.
Define and use guard(rcu_sched_notrace)() across fprobe_ftrace_entry(),
fprobe_fgraph_entry(), and fprobe_return(). This eliminates fast-path
rcu_read_lock() and lockdep overhead while guaranteeing safe grace
period synchronization. |
| SQL injection via identifier injection in the tableName and tableFields POST parameters of admin AJAX endpoints (admin/AJAX_lookup_handler.php, admin/AJAX_check_id.php, admin/AJAX_vocabolary_control.php) in SENAYAN Library Management System (SLiMS) Bulian 9.8.0 allows any authenticated staff user to extract arbitrary database contents. |
| The affiliate-toolkit WordPress plugin before 3.9.1 does not prevent a low-privileged user from supplying a template body that its bundled templating engine compiles and executes as PHP, allowing users with the Contributor role or above to run arbitrary PHP code on the server. |
| The Fast Courier WordPress plugin before 5.2.4 does not sanitize and escape a value before using it in a SQL query on an unauthenticated REST route, allowing unauthenticated attackers to perform SQL injection and read arbitrary data from the database. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Sensitive information disclosure and manipulation due to improper authorization checks. The following products are affected: Acronis Cyber Infrastructure (ACI) before build 6.0.1-112, Acronis Cyber Infrastructure (ACI) before build 6.1.1-64, Acronis Cyber Infrastructure (ACI) before build 6.2.1-71. |
| In Z-Wave SDK 8.1.1 and earlier (for 700/800 series devices) and 6.85.02 and earlier (for 500 series devices), missing checks in the ZWAVE_CMD_NODES_EXIST handler can result in nodes being removed from the network. These messages must come from a device that has already joined the network. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Hold a router reference for each allocated HopID
tb_stop() drops the reference to all DP tunnels but does not deactivate
them, thus nothing cancels a dprx_work still in flight (which holds its
own tunnel reference) and the tunnel can outlive tb_switch_remove(). The
HopID releases in tb_path_free() then operate on freed IDAs and trigger
warnings like
ida_free called for id=8 which is not allocated.
This can be triggered by unbinding the driver while a DP tunnel is still
waiting for the DPRX capabilities read to finish. On the Apple NHI
unplugging the cable runs into just that reliably because the read can
never finish right now and because the unplug powers down the entire
USB4 complex and removes the NHI device.
Take a router reference whenever an input or output HopID is allocated
and drop it again after the HopID is released. This keeps the ports and
their HopID IDAs alive for as long as they are used.
The KUnit tests allocate routers without ever registering their devices
so initialize the embedded struct device there as well and drop its
initial reference when the test is finished. |
| A stack-based buffer overflow vulnerability in the logs settings functionality could allow an authenticated attacker to achieve code execution. |
| Epic Games Unreal Engine versions up to and including 5.8.0 ship with an insecure default configuration for the LaunchURL Blueprint node (UKismetSystemLibrary::LaunchURL). The URL scheme filter (FURLRequestFilter) is empty by default, which permits all URL schemes. On Windows, this results in a call to ShellExecuteW() with the open verb, so a supplied file:/// URI causes the referenced file to be executed. Any Unreal Engine game that loads user-generated content containing Blueprints is vulnerable to command execution via a malicious local file or a remote file on a WebDAV share. This is an instance of CWE-1188 (Initialization of a Resource with an Insecure Default). |
| The Document Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'dg_thumber_webhook' Action Request Body in all versions up to, and including, 5.1.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that logging be enabled in the plugin's Advanced settings, which is only the default state when WP_DEBUG is true; otherwise an administrator must manually enable it. |
| An excessive resource allocation issue in the remote workflow editing capabilities of KNIME Business Hub prior to version 1.19.0 allows a authenticated attack to exhaust resources on the server side. This leads to intermittent unavailability of workflow execution functionality. A workaround is not possible. |
| A use-after-free in the gf_filter_pid_get_packet function (filter_core/filter_pid.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted file. |
| A stack-based buffer overflow vulnerability in the FileProcess::CheckDir function could allow a remote authenticated attacker to achieve arbitrary code execution via a path longer than 1024 bytes. |
| A use-after-free exists in the Windows WFP packet-capture driver shipped with Akamai Guardicore Platform Agent (GPA) before 7.4. When an IPv6 proxy/redirect rule is active, a local attacker with Administrator privileges can send a single crafted outbound IPv6 packet via a raw IPV6_HDRINCL socket to trigger this at DISPATCH_LEVEL, resulting in an immediate system crash. |
| An integer underflow exists in the DNS proxy component of the macOS NetworkExtension system extension shipped with Akamai Guardicore Platform Agent (GPA) for macOS, whereby if a UDP datagram shorter than 96 bytes that begins with a specific value is received, a subsequent size computation underflows to a near-SIZE_MAX value, causing an allocation failure and uncaught Objective-C exception that aborts the root system extension. |
| A use-after-free vulnerability in the Windows WFP callout driver of Akamai Guardicore Platform Agent (GPA) allows a local low-privileged user to cause a denial of service (system crash / BSOD) via an outbound ICMPv6 packet containing an IPv6 Hop-by-Hop extension header. When the IPv6 ICMP redirect policy is active, the packet is copied into a buffer that is freed but subsequently passed to a downstream filter. The size of the freed allocation is attacker-controlled (via packet length), enabling kernel pool grooming. Exploitation requires that the non-default IPv6 ICMP capture/redirect policy is enabled for the endpoint. |
