Export limit exceeded: 413936 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413936 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413936 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98516 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix bridge reference leak in nv1a_ram_new() pci_get_domain_bus_and_slot() takes a reference to the PCI device, which is never released once the memory size has been read from its config space. Drop the reference before returning. | ||||
| CVE-2026-98513 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix runtime PM leak in nouveau_connector_detect() If nvif_outp_edid_get() fails, nouveau_connector_detect() returns early without dropping the runtime PM reference taken at the start of the function, keeping the device powered on until the next successful detect. Balance the reference on the error path like the other exit paths do. | ||||
| CVE-2026-98512 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree(). | ||||
| CVE-2026-98511 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked() nouveau_bo_pin_locked() checks whether an already pinned BO is in a memory domain compatible with a new pin request. When the domains are incompatible, it sets -EBUSY but still calls ttm_bo_pin() before returning. Callers treat a failed nouveau_bo_pin() as not having acquired a new pin, so the extra pin count is never decreased by a matching unpin. This triggers the warning in ttm_bo_release(): WARN_ON_ONCE(bo->pin_count); Found when fuzzing the nouveau driver with a modified Syzkaller: WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212 Modules linked in: CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy) nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256 Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8 msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-... RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36 RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8 msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55 R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290 R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> kref_put include/linux/kref.h:65 [inline] ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline] ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330 nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90 drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165 kref_put include/linux/kref.h:65 [inline] __drm_gem_object_put include/drm/drm_gem.h:562 [inline] drm_gem_object_put include/drm/drm_gem.h:575 [inline] nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195 nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000 nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225 nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284 nouveau 0000:01:00.0: syz.2.23[2209]: validate_init drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438 __fput+0x39c/0xa60 fs/file_table.c:512 nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2 task_work_run+0x15a/0x230 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x82b/0x25a0 kernel/exit.c:1009 do_group_exit+0xc2/0x280 kernel/exit.c:1152 get_signal+0x1d6e/0x1f30 kernel/signal.c:3046 arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:66 [inline] exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline] do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RI ---truncated--- | ||||
| CVE-2026-98508 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference on fence allocation failure virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL, but its caller like virtio_gpu_init_submit() never checks it. Later, virtio_gpu_init_submit() passes the NULL fence to virtio_gpu_fence_event_create(), which unconditionally dereferences it. Found when fuzzing the virtio driver with Syzkaller: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0 Call Trace: <TASK> drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fab471a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003 RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000 ---truncated--- | ||||
| CVE-2026-98504 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Omit bus properties without a subordinate bus A bridge (a device with a Type 1 header) may not have a secondary bus allocated (pdev->subordinate), e.g., if there are no available bus numbers or the bridge secondary/subordinate bus numbers are not writable. The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map() dereference pdev->subordinate without checking it. When CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer dereference and early boot hang. Generate 'bus-range' and 'interrupt-map' properties only when a subordinate bus exists. Keep the node and its remaining properties for bridges without one. The problem was latent since 407d1a51921e ("PCI: Create device tree node for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create device tree PCI host bridge node"), which appeared in v6.15. Before 1f340724419e, of_pci_make_dev_node() returned early because the parent OF node was missing. [bhelgaas: move pdev->subordinate test to callees, commit log] | ||||
| CVE-2026-98501 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() stores data->input2 before calling input_register_device(). If registration fails, input_free_device() frees the input device but data->input2 still points to the freed memory. alps_input_configured() calls hid_hw_open() before allocating input2, so URBs are already active and raw_event can fire during the failure window. A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event() to dereference the freed data->input2 -> use-after-free. Fix by only storing input2 into drvdata after successful registration and adding a NULL guard in the raw_event path. | ||||
| CVE-2026-98499 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce() The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an invalid offset to hid_field_extract(), resulting in memory reads at incorrect addresses -- possibly beyond the end of the report. If a field in the HID descriptor lists more usages than its Report Count actually reserves space for, the function's inner 'j' will walk past the end of the field: for (i = 0; i < report->maxfield; i++) { for (j = 0; j < report->field[i]->maxusage; j++) { ... value = hid_field_extract(hdev, raw_data + 1, offset + j * size, size); A descriptor listing 12288 usages against Report Count 1 has the loop extract the usage at index 12287 from bit offset 98296 -- about 12 KB past a 2-byte received report. The value is stored in wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event, making this an information disclosure. Clamp the loop to field->report_count, the number of value slots the report holds. Value slots past the last declared usage are still scanned; they reuse that usage (HID 1.11, 6.2.2.8). Verified on v6.12.105 with a UHID reproducer: a 2-byte report from such a descriptor trips KASAN before the patch and not after it. | ||||
| CVE-2026-98498 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get() When the reverse entry is found but its counter is already being released, refcount_inc_not_zero() fails and the reference taken by mlx5_tc_ct_entry_get() is never dropped before falling through to create_counter. Drop it so the reverse entry is not kept alive forever by a shared counter lookup that did not use it. | ||||
| CVE-2026-98497 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different source and destination prefix lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks independently, but setup_fte_addr6() installs each mask in the opposite address field. When the prefix lengths differ, this makes the source match use the destination prefix and the destination match use the source prefix. The resulting hardware rule can both miss traffic covered by the policy and match traffic outside it. Install each mask in its corresponding match field. | ||||
| CVE-2026-98496 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: npu: cancel wdt_work after releasing the WDT IRQ airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work, but the watchdog IRQ that queues it is requested with devm_request_irq() and is freed only after .remove() returns. airoha_npu_wdt_handler() can therefore schedule_work() again once the cancel has returned. struct airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in that same unwind, so the late work dereferences freed memory. Register the work with devm_work_autocancel() before devm_request_irq() and drop .remove(). Devres runs in reverse order, so the IRQ is freed before cancel_work_sync(), including when probe fails. A cancel left in .remove() cannot get that order. Initializing the work first also stops a pending watchdog interrupt from queuing an uninitialized work item. Probe currently calls INIT_WORK() only after devm_request_irq(). This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98481 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: port100: reject frames whose declared length exceeds the received data port100_recv_response() passes the URB transfer buffer to port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen) bytes of frame->data. datalen is a 16-bit field supplied by the device and is never checked against the number of bytes actually received (urb->actual_length), so a device reporting a datalen larger than the received frame makes port100_data_checksum() read out of bounds past the transfer buffer. Reject a response whose declared frame size does not fit the received length before validating it. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||
| CVE-2026-98479 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write target-supplied bytes into the pages that write was about to send. Those are the caller's own pinned pages for an O_DIRECT write, and page cache pages for a buffered one. Observed against a test target that emits one 512-byte Data-In naming a 128 KB write's ITT, after the R2T for that write. With O_DIRECT the caller's buffer ends up holding 512 bytes of the target's data while pwrite() returns 131072. Buffered is quieter: pwrite() and fsync() both succeed, nothing is logged, and reading those blocks back returns the target's bytes out of the page cache without a command going on the wire. Check the direction before using the scatterlist, the way the R2T path already does. | ||||
| CVE-2026-98461 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode. | ||||
| CVE-2026-98460 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command. | ||||
| CVE-2026-98457 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed. | ||||
| CVE-2026-98455 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98449 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again. | ||||
| CVE-2026-98448 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that. | ||||