| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to the exposure of namespace-wide secrets via accessible file mounts. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - zero absinfo before partial copy in EVIOCSABS
The EVIOCSABS handler copies at most the user supplied ioctl size into
an uninitialized on-stack struct input_absinfo:
if (copy_from_user(&abs, p, min_t(size_t,
size, sizeof(struct input_absinfo))))
The size comes from _IOC_SIZE() of the ioctl command and is therefore
fully controlled by userspace. A short size leaves the trailing part of
the structure holding whatever was on the kernel stack, and the whole
structure is then stored into the device:
dev->absinfo[t] = abs;
EVIOCGABS hands that back to userspace, disclosing the stale stack
bytes. Only the resolution field is currently cleared, which covers the
legacy struct layout but not an arbitrarily short size.
Zero the structure before the copy so any part not supplied by the
caller reads back as zero. The existing resolution fixup is kept, since
it also handles a size that partially overlaps that field. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then copy up to 64
bytes from outside the buffer into the outgoing MODE SELECT payload,
disclosing stack contents to the target.
This is reachable while scanning a USB storage device that identifies as
an ATA device and advertises CDL support. No filesystem mount or
userspace access to the block device is required.
On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific,
one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator
sampling executed a fixed proof command inside the guest and created a
UID-0-owned marker during automatic enumeration, with KASLR and NX
enabled.
The issue was independently found during security research at Drivesec
S.r.l.
Cap the available length to the buffer size. Validate and consume the
mode header and block descriptor lengths before using the page, and
require the five bytes needed to access the CDL field. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: restrict BAR0 fallback read to SR-IOV VFs only
The BAR0 fallback read path was introduced as a workaround for SR-IOV VFs
where the VRAM aperture is not available during early init. Restrict this
workaround to only SR-IOV VFs where it's needed.
(cherry picked from commit d8a0affd207c813bd063fa2c27786f449eaf92b8) |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, Harmony tool continuations submitted through "POST /v1/responses" requests rebuild the next-turn engine input without preserving the cache_salt value, placing the continuation prefix in the global unsalted cache namespace even when the caller enabled salting. On deployments with prefix caching enabled, which is the default, an authenticated tenant who can reconstruct a victim's low-entropy post-tool history can submit the same continuation and use the cached_tokens_per_turn count to determine whether the prefix was previously processed, defeating the intended tenant isolation of salted prefix caching. This issue is fixed in version 0.30.0. |
| Plane is an open-source project management tool. Prior to 1.4.0, Plane's signup flow creates a logged-in User row for any submitted email without an out-of-band ownership check, while User.email is unique=True. The authenticated user can call GET /api/users/me/workspaces/invitations/, which returns each WorkspaceMemberInvite whose email matches request.user.email. WorkSpaceMemberInviteSerializer uses fields = "all", exposing the token that protects the invitation join endpoint. An unauthenticated attacker who knows a target's email can register an account using that address, enumerate pending invitations, and accept an invitation as the target, joining a workspace at the invited role. The term pre-auth describes the attacker's initial state: the attacker has no credential before signup, while the enumeration and join requests use the session created by that signup. This issue is fixed in 1.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: zero ff_effect before compat copy in input_ff_effect_from_user
In the compat path input_ff_effect_from_user() aliases the caller's
native struct ff_effect with the smaller struct ff_effect_compat and
copies only the compat sized prefix:
compat_effect = (struct ff_effect_compat *)effect;
if (copy_from_user(compat_effect, buffer,
sizeof(struct ff_effect_compat)))
The tail of the native structure is never written. Callers pass an
uninitialized on-stack object, for example evdev_do_ioctl() for
EVIOCSFF, so those bytes keep their previous stack contents.
input_ff_upload() then stores the full native structure in
ff->effects[id], from where a uinput based force feedback daemon can
read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to
userspace.
Zero the effect before the compat copy. |
| Information disclosure in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| A security vulnerability has been detected in uptrace up to 2.1.0-beta.8. Affected by this vulnerability is the function Login of the file pkg/org/user_handler.go. The manipulation leads to information exposure through error message. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Penpot is an open-source design and prototyping platform. Prior to 2.18.0, the get-comment-threads, get-comment-thread, and get-comments RPC commands use check-comment-permissions! but do not apply the share link's pages restriction. A holder of a page-scoped share link can retrieve comment threads and full comment bodies from other pages in the same file, including commenter names, email addresses, photos, and page identifiers. The disclosed page identifiers can also be used with affected page-reading functionality to access unshared design content. This issue is fixed in version 2.18.0. |
| Information disclosure in the Networking component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| Plane is an open-source project management tool. Prior to 1.4.0, ProjectJoinEndpoint at GET /api/workspaces/{slug}/projects/{project_id}/join/{pk}/ uses permission_classes = [AllowAny] and returns the full ProjectMemberInvite record, including its email, token, and role, to unauthenticated callers. The corresponding POST endpoint checks only whether the submitted email matches project_invite.email and does not validate the invitation token. An attacker who knows the invitation UUID can discover the invited email, register an account with that email, and accept the invitation without receiving the original invite. This issue is fixed in 1.4.0. |
| Plane is an open-source project management tool. Prior to 1.4.0, GET /api/workspaces/{slug}/cycles/ through WorkspaceCyclesEndpoint and GET /api/workspaces/{slug}/modules/ through WorkspaceModulesEndpoint return records from every project in a workspace without checking whether the requester belongs to each project. Any authenticated workspace member, including a Guest with access to only one project, can enumerate names, descriptions, sprint dates, issue counts, progress snapshots, external integration IDs, linked URLs, and member lists for cycles and modules in private projects. The sibling WorkspaceLabelsEndpoint and WorkspaceStatesEndpoint apply the correct project__project_projectmember__member=request.user filter, making the cycle and module endpoints inconsistent outliers. This issue is fixed in 1.4.0. |
| OAuth2 is a Ruby wrapper for the OAuth 2.0 and 2.1 authorization frameworks, including OpenID Connect (OIDC). From 0.4.0 to 2.0.21, a protocol-relative redirect Location returned to OAuth2::Client#request overrides the request authority, so the bearer Authorization header is sent to an attacker-controlled host, leaking the credential. This issue is fixed in version 2.0.22. |
| Information disclosure in the Networking: HTTP component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| HCL BigFix Service Management is affected by an Information Disclosure vulnerability because two exposed API endpoints return sensitive data. This information could enable an attacker to launch further, more serious attacks. |
| HCL BigFix Service Management is affected by an Information Disclosure vulnerability, which could allow an unauthenticated attacker to analyze publicly accessible JavaScript files, enabling the discovery of hidden administrative API endpoints for further targeted exploitation. |
| OpenAM before 16.1.3 contains an authorization bypass vulnerability in the sessions REST endpoint query operation that allows realm administrators to list sessions of every realm. Attackers holding delegated RealmAdmin privileges can supply a _queryFilter naming another realm to disclose usernames, universal IDs, and session handles across tenant boundaries. |
| Backdrop CMS before 1.35.1 contains an information disclosure vulnerability that allows unauthenticated attackers to retrieve configuration export archives left on the server after transfer. Attackers can download compressed archives generated by users with configuration export permission to obtain the full site configuration, including sensitive settings. |
| Kener 4.0.0 before 4.1.6 contains an information disclosure vulnerability that allows unauthenticated attackers to retrieve hidden or inactive monitor data by querying dashboard API handlers lacking visibility filters. Attackers can supply a known or guessed monitor tag to endpoints such as monitor-bar and monitor-latency-chart to obtain names, descriptions, status, uptime history and latency. |
