| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow in EOP ring size calculation.
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
order_base_2(q->eop_ring_buffer_size / 4) - 1
But order_base_2 can in theory return 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
order_base_2(q->eop_ring_buffer_size / 8)
using properties of logarithms.
Also add to the above comment to make the mathematics more clear.
(cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not force reloc root creation during qgroup_account_snapshot()
[BUG]
When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota",
it has a high chance to trigger the following kernel warning and flips
the fs RO:
BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173
CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs]
Call Trace:
<TASK>
insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__x64_sys_ioctl+0x416/0x9a0
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2
BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173
item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33
extent refs 1 gen 222 flags 2
ref#0: tree block backref root 266
[ Skip the tree dump ]
item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33
extent refs 1 gen 162 flags 258
ref#0: tree block backref root 267
BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0
BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117
[CAUSE]
The above error is showing that there is a tree reference to a metadata
extent that is no longer there.
With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is
some extra debug output:
BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0
BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615
BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615
BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1
btrfs_force_cow_block+0x129/0x7d0 [btrfs]
btrfs_cow_block+0x10a/0x250 [btrfs]
btrfs_search_slot+0x5eb/0xf40 [btrfs]
btrfs_insert_empty_items+0x3a/0x70 [btrfs]
insert_with_overflow+0x53/0x130 [btrfs]
btrfs_insert_dir_item+0x125/0x290 [btrfs]
btrfs_add_link+0xaa/0x410 [btrfs]
btrfs_rename+0x5ea/0xcd0 [btrfs]
btrfs_rename2+0x28/0x60 [btrfs]
vfs_rename+0x5b2/0xe10
filename_renameat2+0x244/0x430
__x64_sys_rename+0x48/0x70
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Skip KFD mapping clear before initialization
amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev
has a fully populated node array. This is not true when KFD device
initialization fails after probe.
For example, kgd2kfd_device_init() sets num_nodes before checking
PCIe atomics support. On Polaris systems without the required atomics,
it returns before allocating nodes[0], but the kfd_dev remains attached
to the amdgpu device. A later GPU reset then dereferences nodes[0]->id.
Require the authoritative KFD initialization flag before walking the
node array, matching the existing KFD reset and teardown paths.
(cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv->cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
mhi_mbim_rx() ignores the return value of skb_copy_bits() when it
copies each datagram out of the NTB. The datagram offset and length
come from the DPE, which is only checked to lie within the NTB
itself, so a modem can point a datagram outside the received skb.
The copy then fails and the freshly allocated skbn is passed to
netif_rx() with its uninitialized contents still in place, leaking
kernel heap memory into the network stack.
Free the skb and account an error when the copy fails.
Verified in a QEMU guest with a fault injector pointing a DPE
outside the received NTB: the copy fails, and the unpatched driver
hands the uninitialized skbn to the network stack (observed as
"unknown protocol" on bytes that were never written). With this
check the failed datagram is dropped and counted as an rx error.
Changes in v2: factor the free-and-count sequence out into
mhi_mbim_rx_drop(), shared with the unknown-protocol path, as
suggested by Loic Poulain. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: validate access flags before swapping the MR's PD
rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: use rds_conn_drop() on protocol version mismatch
rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with
conn->c_cm_lock held. When the peer negotiates a protocol version
older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls
rds_conn_destroy(), which is only safe in the rmmod path: it
synchronously tears the connection down and flush_work()es the
shutdown work cp_down_w.
That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is
the very lock the event handler still holds, so the flush never
completes: the two workers wait on each other and the RDS connection
workqueues stall for good.
All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR,
DISCONNECTED) use rds_conn_drop(), which marks the connection
RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use
it here as well. |
