Export limit exceeded: 413977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413977 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98843 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: zero gaps in read-gaps folio to avoid writing back stale data netfs_read_gaps() leaves gaps around a streaming write's dirty region unread on the server side, so a short/EOF response there left stale folio content that later got written back. Zero it after the read completes, not before: netfs_wait_for_read() returns rreq->transferred once ret >= 0, so build an iterator over the same bvec array the read used, advance past ret, and zero the rest. The dirty region already maps to sink pages in that array rather than the real folio, so this can't touch it, and only the actual shortfall gets zeroed instead of the whole gap upfront. | ||||
| CVE-2026-112145 | 1 Speaches-ai | 1 Speaches | 2026-10-19 | 7.3 High |
| A security vulnerability has been detected in speaches-ai speaches up to 0.9.0-rc.3. This vulnerability affects the function PyannoteDiarizationModelManager._load_fn of the file src/speaches/executors/pyannote_diarization.py of the component Pyannote Diarization Model Loading. The manipulation of the argument model leads to use of externally-controlled input to select classes or code. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The feature was introduced in PR #628 (feat/switch to pyannote audio), merged as commit 870e1e16a73452496e99d49f759eabd692a8e0e0. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-109720 | 1 Mozilla | 1 Firefox | 2026-10-19 | 7.1 High |
| JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98438 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case. | ||||
| CVE-2026-81452 | 1 Dell | 1 Alienware Command Center | 2026-10-19 | 7 High |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. | ||||
| CVE-2026-98814 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix command effects log lifetime for multipath heads KASAN reported a use-after-free when an I/O passthrough command was sent through a multipath namespace head after the controller path that first created the head had been removed: BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core] Read of size 4 at addr ffff888141b14400 by task nvme/19811 nvme_command_effects+0x192/0x200 [nvme_core] nvme_cmd_allowed+0x7e/0x1b0 [nvme_core] nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core] nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core] Move the log cache to the subsystem, with one entry per command set. Both controllers and namespace heads hold subsystem references, keeping their log pointers valid until subsystem release. | ||||
| CVE-2026-98828 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: reject short WMI command responses ath9k_wmi_rsp_callback() removes the validated WMI header and copies the number of bytes expected by the waiting command into its response buffer. A device response shorter than that expectation can therefore be read beyond the skb payload. Record -EMSGSIZE for a short response, complete the waiter, and return the stored status from the command path. This also prevents callers from consuming stale response bytes as a successful reply. | ||||
| CVE-2026-109740 | 1 Mozilla | 1 Firefox | 2026-10-19 | 9.6 Critical |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-98803 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | ||||
| CVE-2026-98821 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: reject polled dio with user integrity metadata IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O always uses __blkdev_direct_IO(), which never publishes the bio for polling, so IOPOLL calls bio_poll() on the uio_meta. Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device (scsi_debug dif=1 dix=1). KASAN reports: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004 KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:bio_poll+0x9d/0x4b0 Call Trace: iocb_bio_iopoll+0x5b/0x80 io_uring_classic_poll+0xf3/0x140 io_do_iopoll+0x4e3/0xc00 io_iopoll_check+0x275/0x560 __do_sys_io_uring_enter+0x2e5/0x720 Return -EOPNOTSUPP when HIPRI is combined with user metadata. | ||||
| CVE-2026-69880 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-19 | 7.8 High |
| Access of resource using incompatible type ('type confusion') in Desktop Window Manager allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69882 | 1 Microsoft | 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more | 2026-10-19 | 7.8 High |
| Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69883 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-19 | 9.8 Critical |
| Use after free in Windows iSCSI allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-69991 | 1 Microsoft | 22 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 19 more | 2026-10-19 | 7.5 High |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-77474 | 2026-10-19 | 7.1 High | ||
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. | ||||
| CVE-2026-68906 | 1 Mz-automation | 1 Libiec61850 | 2026-10-19 | N/A |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, parseUserInformation in src/mms/iso_acse/acse.c checks len for zero before validating the negative bufPos returned by BerDecoder_decodeLength for a truncated long-form length. The continue path therefore swallows the error, reads buffer[-1], resets parsing to the beginning, and repeats the same malformed state. An unauthenticated remote peer can send a malformed AARE PDU during association to cause an infinite CPU loop under a normal allocator or a one-byte out-of-bounds read and process abort when the preceding byte is inaccessible. This issue is fixed in version 1.6.2. | ||||
| CVE-2026-59967 | 1 Tandoorrecipes | 1 Recipes | 2026-10-19 | 5.4 Medium |
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.10, looks up BookmarkletImport by sequential primary key within the active Space without restricting created_by to the requesting user when an authenticated member of a shared Space submits another member's pending bookmarklet identifier to POST /api/recipe-from-source/. Request processing uses api/recipe-from-source/, BookmarkletImport, filter, delete. The attack works because the endpoint parses and returns the victim's stored URL and captured page content, then unconditionally deletes the victim's pending import. This can disclose authenticated or private captured page content and destroy another Space member's pending import. This issue is fixed in version 2.6.10. | ||||
| CVE-2026-112140 | 1 Llsourcell | 1 Doctor-dignity | 2026-10-19 | 6.3 Medium |
| A vulnerability was found in llSourcell Doctor-Dignity up to 3f2ffb6c892f13b50a708d05900d3227acb40ded. This impacts the function _get_lib_module of the file python/mlc_chat/chat_module.py. The manipulation of the argument model_lib results in code injection. The attack may be launched remotely. The exploit has been made public and could be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-112107 | 1 Ztxz16 | 1 Fastllm | 2026-10-19 | 6.3 Medium |
| A flaw has been found in ztxz16 fastllm up to 1.8.2. Affected by this issue is the function SafeTensorItem::CreateBuffer of the file src/model.cpp of the component Safetensors Weight Loading. This manipulation of the argument data_offsets causes buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-112103 | 1 F3-factory | 1 Fatfree-core | 2026-10-19 | 3.7 Low |
| A vulnerability has been found in f3-factory fatfree-core up to 3.9.2. This vulnerability affects the function _curl of the file web.php of the component HTTP Client. Such manipulation leads to improper certificate validation. The attack may be performed from remote. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 3.9.3 is able to resolve this issue. The name of the patch is a2c755c8dc9ad0eb7d5fd261b09aff90f649433c. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||