| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Fix clock provider use-after-free on probe failure
ac100_rtc_register_clks() registers the RTC-32k clock with
clk_hw_register_fixed_rate() and the clock provider with
of_clk_add_hw_provider(). Neither is device managed, and both are
released only from ac100_rtc_remove(). The driver core does not call
remove() when probe() fails: really_probe() reaches probe_failed below
the device_remove() call and goes straight to releasing the device's
managed resources.
ac100_rtc_probe() ends with
return devm_rtc_register_device(chip->rtc);
so if that fails after the clocks have been registered, the provider is
left on the global of_clk_providers list holding chip->clk_data, which
was allocated with devm_kzalloc() and is freed while probe() unwinds. A
later lookup on this device tree node then reads freed memory in
of_clk_hw_onecell_get(). Consumers that do exactly that exist in tree:
the wifi power sequence nodes on sun8i-a83t-bananapi-m3 and
sun8i-a83t-cubietruck-plus take <&ac100_rtc 1>, and the sun9i-a80 boards
route osc32k through <&ac100_rtc 0>. The window is narrow, as
devm_rtc_register_device() can only fail with -ENOMEM here, but the
provider is left dangling whenever it does.
The RTC-32k clock is leaked on the same path. Since clk_core_lookup()
searches a global list that is not scoped per device, __clk_register()
rejects the duplicate name with -EEXIST, so the leak also makes a later
probe of the same device fail.
The error path that returns -EINVAL when the ADDA 4M parent clock cannot
be found leaks the RTC-32k clock in the same way. No provider has been
registered at that point, so that one is a leak rather than a
use-after-free.
Register both with devm_clk_hw_register_fixed_rate() and
devm_of_clk_add_hw_provider() so that they are released whenever the
device goes away, on a failed probe as well as on unbind. Devres
releases in reverse order of acquisition, so the provider is removed
before chip->clk_data is freed, and the clkout children are now
unregistered before their parent rather than after it.
ac100_rtc_unregister_clks() and the remove callback then have nothing
left to do and are removed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| A security vulnerability has been detected in speaches-ai speaches up to 0.9.0-rc.3. This vulnerability affects the function PyannoteDiarizationModelManager._load_fn of the file src/speaches/executors/pyannote_diarization.py of the component Pyannote Diarization Model Loading. The manipulation of the argument model leads to use of externally-controlled input to select classes or code. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The feature was introduced in PR #628 (feat/switch to pyannote audio), merged as commit 870e1e16a73452496e99d49f759eabd692a8e0e0. The project was informed of the problem early through an issue report but has not responded yet. |
| JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: fix uninit-value in mptcp_write_data_fin
When sending a DATA_FIN without data, and because the DATA_FIN occupies
1 octet of the connection-level sequence space [1], it is then required
to add a DSS mapping with specific values.
If the checksum has been negotiated, it also needs to be computed, and
included in the outgoing packet, and thus the initial csum data needs to
be reset to 0 as well. This is no longer the case since commit
cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"),
because the whole ext_copy structure is no longer zeroed by default.
This seems to be the only case where use_map is changed and set
afterwards, so initialising the csum field only in this case, along with
other fields for this specific case. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix command effects log lifetime for multipath heads
KASAN reported a use-after-free when an I/O passthrough command was sent
through a multipath namespace head after the controller path that first
created the head had been removed:
BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core]
Read of size 4 at addr ffff888141b14400 by task nvme/19811
nvme_command_effects+0x192/0x200 [nvme_core]
nvme_cmd_allowed+0x7e/0x1b0 [nvme_core]
nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core]
nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core]
Move the log cache to the subsystem, with one entry per command set. Both
controllers and namespace heads hold subsystem references, keeping their
log pointers valid until subsystem release. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still reference the cdev after the nvme_ns_head reference count
drops to 0 (and is freed).
This can be shown with an application which delays between opening the cdev
and issuing the ioctl while the NS head is being torn down:
# ./ioctl_file /dev/ng1n1 &
# waiting 10 seconds ....
# ./ini_nvme_teardown.sh
[ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target"
[ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target"
# now going to issue ioctl ....
[ 26.549285] ==================================================================
[ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40
[ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237
[ 26.553805]
[ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy)
[ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 26.554241] Call Trace:
[ 26.554245] <TASK>
[ 26.554248] dump_stack_lvl+0x68/0xa0
[ 26.554266] print_report+0x10d/0x5d0
[ 26.554276] ? __virt_addr_valid+0x21d/0x3f0
[ 26.554287] ? cdev_put.part.0+0x3d/0x40
[ 26.554292] kasan_report+0x96/0xd0
[ 26.554300] ? cdev_put.part.0+0x3d/0x40
[ 26.554307] cdev_put.part.0+0x3d/0x40
[ 26.554313] __fput+0x7bc/0xa70
[ 26.554322] fput_close_sync+0xd8/0x190
[ 26.554328] ? __pfx_fput_close_sync+0x10/0x10
[ 26.554337] __x64_sys_close+0x79/0xd0
[ 26.554344] do_syscall_64+0x117/0x6b0
[ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 26.554358] RIP: 0033:0x7f938c067727
[ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf
[ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727
[ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000
[ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78
[ 26.554397] </TASK>
[ 26.554399]
[ 26.575612] Allocated by task 100:
[ 26.575871] kasan_save_stack+0x24/0x50
[ 26.576157] kasan_save_track+0x14/0x30
[ 26.576418] __kasan_kmalloc+0x7f/0x90
[ 26.576668] __kmalloc_noprof+0x281/0x6c0
[ 26.576938] nvme_alloc_ns+0x7f7/0x3170
[ 26.577206] nvme_scan_ns+0x508/0x880
[ 26.577449] async_run_entry_fn+0x8c/0x350
[ 26.577723] process_scheduled_works+0xb6f/0x1a00
[ 26.578034] worker_thread+0x4ad/0xb40
[ 26.578283] kthread+0x34f/0x450
[ 26.578501] ret_from_fork+0x563/0x800
[ 26.578752] ret_from_fork_asm+0x1a/0x30
[ 26.579012]
[ 26.579124] Freed by task 237:
[ 26.579335] kasan_save_stack+0x24/0x50
[ 26.579596] kasan_save_track+0x14/0x30
[ 26.579855] kasan_save_free_info+0x3a/0x60
[ 26.580131] __kasan_slab_free+0x43/0x70
[ 26.580388] kfree+0x321/0x500
[ 26.580591] nvme_ns_head_chr_release+0x39/0x50
[ 26.580883] __fput+0x352/0xa70
[ 26.581095] fput_close_sync+0xd8/0x190
[ 26.581350] __x64_sys_close+0x79/0xd0
[ 26.581595] do_syscall_64+0x117/0x6b0
[ 26.581842] entry_SYSCAL
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not wake up kswapd in __kfree_rcu_sheaf()
Since kfree_rcu() can be called under pi_lock (a raw spinlock in the
scheduler), kfree_rcu() itself should never allocate memory with
__GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock,
which leads to a deadlock.
Reproducing the issue even intentionally was not straightforward.
The set_cpus_allowed_force() path that is called under pi_lock is
exercised very rarely, and competing tasks that allocate memory will
most likely wake kswapd up.
Therefore the existence of the deadlock was verified with a modified
kernel that has a lockdep map for waking up kswapd:
======================================================
WARNING: possible circular locking dependency detected
7.2.0-rc1-slab-for-next+ #10 Not tainted
------------------------------------------------------
git/6660 is trying to acquire lock:
ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20
but task is already holding lock:
ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&pgdat->kswapd_wait){....}-{3:3}:
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
__wake_up_common_lock+0x31/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
-> #1 (kswapd_wakeup){-.-.}-{0:0}:
__lock_acquire+0x5a4/0xc50
lock_sync.part.0+0x75/0x100
lock_sync+0x36/0x70
might_wakeup_kswapd+0x61/0xa0
__kfree_rcu_sheaf+0x33/0xd90
kvfree_call_rcu+0x1d4/0x3b0
set_cpus_allowed_force+0x163/0x220
cpuset_cpus_allowed_fallback+0x18b/0x240
select_fallback_rq+0x1e6/0x250
[...]
-> #0 (&p->pi_lock){-.-.}-{2:2}:
check_prev_add+0xe6/0xe00
validate_chain+0x51e/0x6e0
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
try_to_wake_up+0x77/0xa90
default_wake_function+0x27/0x60
autoremove_wake_function+0x23/0xb0
__wake_up_common+0xb8/0x170
__wake_up_common_lock+0x51/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
other info that might help us debug this:
Chain exists of:
&p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pgdat->kswapd_wait);
lock(kswapd_wakeup);
lock(&pgdat->kswapd_wait);
lock(&p->pi_lock);
*** DEADLOCK ***
3 locks held by git/6660:
#0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60
#1: ffffffff8a31c460 (kswapd_wakeup){-.-.}-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: reject short WMI command responses
ath9k_wmi_rsp_callback() removes the validated WMI header and copies
the number of bytes expected by the waiting command into its response
buffer. A device response shorter than that expectation can therefore
be read beyond the skb payload.
Record -EMSGSIZE for a short response, complete the waiter, and return
the stored status from the command path. This also prevents callers from
consuming stale response bytes as a successful reply. |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix rx Scatter-Gather support
When a received frame is larger than dma_buf_sz, the DMA scatters it
across multiple RX descriptors (rx Scatter-Gather). The secondary RX
buffer (sec_page) was only allocated and programmed when split-header
(SPH) was active, so for regular frames buffer2 was neither allocated
nor backed by a valid mapping. As soon as an incoming frame overflowed
buffer1, the DMA wrote the overflow into the unmapped secondary-buffer
address, triggering an SMMU translation fault on IOMMU-based platforms:
arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90
arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1]
Enable scatter-gather for non-SPH frames on cores that can program an
independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2
as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account
for it in the buffer length computation. Legacy cores have no set_sec_addr
op, so they keep buffer2 disabled.
Since buffer2 is handed to the DMA at page offset 0, the page pool sync
window is widened to cover both buffers in every mode: offset is set to 0
and max_len to dma_buf_sz + stmmac_rx_offset().
The FCS can straddle the buffer1/buffer2 boundary and a descriptor
boundary, so it is now stripped from the tail of the assembled frame with
pskb_trim() instead of from a single buffer, avoiding an unsigned underflow
for frames that overflow a buffer by 1..3 bytes. For single-buffer frames
the XDP program must not see the FCS, so it is removed from the XDP buffer
before the program runs.
Native XDP currently only supports single-buffer (linear) frames. An
oversized frame accepted by the MAC (jumbo enabled) is received via
buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict
the frame is forwarded truncated. XDP multi-buffer support to handle
this case is planned as a follow-up.
AF_XDP zero-copy RX is not covered by this change: a ZC queue still
programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit),
so an oversized frame overflowing buffer1 can still trigger the same
SMMU translation fault. Handling is planned as a follow-up. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject polled dio with user integrity metadata
IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while
iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O
always uses __blkdev_direct_IO(), which never publishes the bio for
polling, so IOPOLL calls bio_poll() on the uio_meta.
Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device
(scsi_debug dif=1 dix=1). KASAN reports:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000004
KASAN: null-ptr-deref in range
[0x0000000000000020-0x0000000000000027]
RIP: 0010:bio_poll+0x9d/0x4b0
Call Trace:
iocb_bio_iopoll+0x5b/0x80
io_uring_classic_poll+0xf3/0x140
io_do_iopoll+0x4e3/0xc00
io_iopoll_check+0x275/0x560
__do_sys_io_uring_enter+0x2e5/0x720
Return -EOPNOTSUPP when HIPRI is combined with user metadata. |
| Access of resource using incompatible type ('type confusion') in Desktop Window Manager allows an authorized attacker to elevate privileges locally. |
| Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows iSCSI allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. |
