| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix incorrect RCU teardown order
i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate
over the fences in an GEM object without holding a reference but only
the RCU read side lock.
What can happen here is that the GEM object is destroyed concurrently
while i915_gem_busy_ioctl is still running. This won't free the GEM
objects memory, but still drops all the dma_fence references.
Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it
assumes that a new fence list was installed and re-starts the loop.
But in the case of a destroyed GEM object a new fence list is never
installed, only the old one freed and therefore the iteration never
finishes resulting in an endless loop.
The solution is to drop the fence references only after the RCU grace
period.
The fixes tag is not necessary the patch introducing the problem, but the
one making it so worse that we need to address it.
This problem was pointed out by Sashiko-bot.
(cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix runtime PM leak in nouveau_connector_detect()
If nvif_outp_edid_get() fails, nouveau_connector_detect() returns
early without dropping the runtime PM reference taken at the start
of the function, keeping the device powered on until the next
successful detect.
Balance the reference on the error path like the other exit paths
do. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: RCU-free the scheduler-containing nouveau_sched
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched->base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix NULL pointer dereference on fence allocation failure
virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL,
but its caller like virtio_gpu_init_submit() never checks it. Later,
virtio_gpu_init_submit() passes the NULL fence to
virtio_gpu_fence_event_create(), which unconditionally dereferences it.
Found when fuzzing the virtio driver with Syzkaller:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0
Call Trace:
<TASK>
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fab471a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd
RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003
RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: of_property: Omit bus properties without a subordinate bus
A bridge (a device with a Type 1 header) may not have a secondary bus
allocated (pdev->subordinate), e.g., if there are no available bus numbers
or the bridge secondary/subordinate bus numbers are not writable.
The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map()
dereference pdev->subordinate without checking it. When
CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer
dereference and early boot hang.
Generate 'bus-range' and 'interrupt-map' properties only when a subordinate
bus exists. Keep the node and its remaining properties for bridges without
one.
The problem was latent since 407d1a51921e ("PCI: Create device tree node
for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create
device tree PCI host bridge node"), which appeared in v6.15. Before
1f340724419e, of_pci_make_dev_node() returned early because the parent OF
node was missing.
[bhelgaas: move pdev->subordinate test to callees, commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an
invalid offset to hid_field_extract(), resulting in memory reads at
incorrect addresses -- possibly beyond the end of the report. If a
field in the HID descriptor lists more usages than its Report Count
actually reserves space for, the function's inner 'j' will walk past
the end of the field:
for (i = 0; i < report->maxfield; i++) {
for (j = 0; j < report->field[i]->maxusage; j++) {
...
value = hid_field_extract(hdev, raw_data + 1,
offset + j * size, size);
A descriptor listing 12288 usages against Report Count 1 has the loop
extract the usage at index 12287 from bit offset 98296 -- about 12 KB
past a 2-byte received report. The value is stored in
wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event,
making this an information disclosure.
Clamp the loop to field->report_count, the number of value slots the
report holds. Value slots past the last declared usage are still
scanned; they reuse that usage (HID 1.11, 6.2.2.8).
Verified on v6.12.105 with a UHID reproducer: a 2-byte report from
such a descriptor trips KASAN before the patch and not after it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: port100: reject frames whose declared length exceeds the received data
port100_recv_response() passes the URB transfer buffer to
port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen)
bytes of frame->data. datalen is a 16-bit field supplied by the device
and is never checked against the number of bytes actually received
(urb->actual_length), so a device reporting a datalen larger than the
received frame makes port100_data_checksum() read out of bounds past the
transfer buffer.
Reject a response whose declared frame size does not fit the received
length before validating it.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write, and page cache pages for a buffered one.
Observed against a test target that emits one 512-byte Data-In naming a 128
KB write's ITT, after the R2T for that write. With O_DIRECT the caller's
buffer ends up holding 512 bytes of the target's data while pwrite()
returns 131072. Buffered is quieter: pwrite() and fsync() both succeed,
nothing is logged, and reading those blocks back returns the target's bytes
out of the page cache without a command going on the wire.
Check the direction before using the scatterlist, the way the R2T path
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: validate event length before filtering
is_filtered_packet() reads the event code from skb->data[0] without first
checking that the skb is nonempty. When an opcode filter is configured,
it also reads the command opcode at offsets 3 or 4 without checking that
a Command Complete or Command Status event is long enough.
hci_send_to_sock() invokes the filter before hci_event_packet() validates
the event header. A malformed event supplied by a controller or a vhci
device can therefore cause an out-of-bounds read.
Keep the unmasked event code for the opcode checks. The masked value is
needed for the 64-bit event bitmap, but using it to identify command events
aliases event codes above 0x3f. In particular, Synchronous Train Complete
(0x4f) was treated as Command Status (0x0f) even though its payload has no
opcode.
Reject actual command events that are too short for the field being
inspected. A truncated command event cannot match a configured opcode. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: reject out-of-range OCF values
The raw HCI socket security filter has 128 OCF bits per supported OGF,
but masks the 10-bit OCF with 127 before looking up the command. An
unprivileged socket can therefore submit a reserved OCF that aliases an
allowlisted command modulo 128.
A conforming controller should reject reserved opcodes. Nevertheless,
the security decision must apply to the opcode that will actually be
sent, especially since controller-specific behavior is outside the host
stack's control.
Reject OCF values that cannot be represented by the security filter
instead of aliasing them onto an unrelated command. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate frame length before control and FCS access
l2cap_data_rcv() unpacks either a two-byte or four-byte control field
without first ensuring that it is present. A short ERTM or streaming-mode
frame can therefore cause an out-of-bounds read.
There is a second short-frame case when CRC16 is enabled. After the
control field is pulled, l2cap_check_fcs() subtracts two from skb->len
without checking it. If fewer than two bytes remain, the subtraction
wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS
load reads past the logical end of the frame.
Validate that the frame contains both its control field and, when
enabled, its FCS before either field is accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, however, can go away underneath it.
rfcomm_recv_disc() forces the dlc state before tearing it down:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers
BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state
already BT_CLOSED that switch does not match and the function falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL, while
d->defer_setup stays 1.
A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after
that point therefore skips the -ENOTCONN path -- sk->sk_state is
BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the
NULL session. No race is needed: once the DISC has been processed, the
dereference is unconditional.
Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over
/dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM
PSM, starts a session and sends SABM for a channel bound with
BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been
accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted
socket then hits:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780
Call Trace:
<TASK>
do_sock_getsockopt+0x3ad/0x7d0
__sys_getsockopt+0x10e/0x1b0
__x64_sys_getsockopt+0xc2/0x160
do_syscall_64+0xda/0x4b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
0x10 is the offset of sock in struct rfcomm_session;
rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt().
Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the
deferred setup accept") fixed the same "a remote DISC clears the session
while deferred setup is still flagged" problem in rfcomm_dlc_accept();
this is the remaining instance of it, in the getsockopt path.
Deferred setup only leaves a socket usable here once it has reached
BT_CONNECT2, so restrict the exception to that state and check that a
session is actually present before following it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: delete compound mids on send failure before unlock
When sending a compound request fails, smb_send_rqst() kicks off a
reconnect. compound_send_recv() still has those mids on pending_mid_q,
but it unlocks the server without removing them first.
During reconnect, cifs_abort_connection() walks pending_mid_q and runs
each mid callback. With no response yet, those callbacks return credits
and drop in_flight. Then compound_send_recv()'s send-error path returns
the same credits again. in_flight ends up decremented twice and
smb2_add_credits() WARNs.
syzbot hits this during SMB2_negotiate when the socket send fails.
cifs_call_async() already calls delete_mid() before unlock on send
failure. Do the same for compound chains and set cancelled_mid[] so the
out: path does not delete them again. |
