| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix potential races in dat skey functions
When dat_cond_set_storage_key() finds a large page, it will
conditionally set the storage key in absolute memory using
large_crste_to_phys() to get the absolute address.
There is a race window between dat_entry_walk() and
large_crste_to_phys(): the large page could have been split
concurrently, and large_crste_to_phys() might be called with a crste
that does not designate a large page, leading to crashes.
Similar issues were also present in dat_set_storage_key().
dat_get_storage_key() and dat_reset_reference_bit() did instead check
for a potential concurrent splitting of the large page, but then
handled it incorrectly.
Fix by performing a READ_ONCE on the crste pointer, checking and using
the result, instead of dereferencing the pointer again. In case a race
is detacted, try dat_entry_walk() again. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix race in _destroy_pages_crste()
Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid
dereferencing the pointer multiple times. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Prevent potential out-of-bounds read
When the system has more than 85 secrets, the uv_secret_list struct
array only holds up to 85 items per page, resulting in an out of bounds
read in find_secret_in_page if the targeted secret is in the next page
or not stored at all.
Fix this by looping over the number of stored secrets which is the
per sub-list count of stored secrets and not the overall count. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If
the sock is a listener that still has children in its accept queue,
tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched()
there trips the debug check:
BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
locks held by test_progs/628: 3, last CPU#3:
#0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210
#1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0
#2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0
CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
dump_stack+0x10/0x20
__might_resched+0x3d2/0x610
inet_csk_listen_stop+0x7b/0xbf0
tcp_abort+0x23b/0x3b0
bpf_sock_destroy+0xfc/0x140
bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fad39b28aca
RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca
RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014
RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000
</TASK>
The commit that added the kfunc already guards lock_sock() in tcp_abort()
and udp_abort() with has_current_bpf_ctx(), but missed the listener path.
Do the same for the cond_resched(). The loop runs inside the iterator's
rcu_read_lock(), it must not reschedule or report a quiescent state there. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: riscv: Fix NACL hfence entry update order
The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE
entry to be populated as follows:
1) find an unused entry with Config.Pending == 0
2) update the Page_Number and Page_Count words
3) update the Config word with Config.Pending set
__kvm_riscv_nacl_hfence() writes the Config word first, so the SBI
implementation (or NACL hardware) can observe a pending entry with
pnum/pcount values left over from the previous use of that entry,
resulting in incorrect TLB flush ranges.
Write pnum and pcount first and the Config word last. Since the
consumer is an external agent on coherent shared memory, use
WRITE_ONCE() to stop the compiler from reordering the stores and
smp_wmb() to make the parameter words globally visible before the
Pending bit is set. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve()
pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided
sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl()
and the WARN_ON() there, which is fatal at EL2. The existing
!sve_state_size test rejects such a length, but only after the macro has
run.
Check sve_vl_valid() before deriving the state size. A valid length
cannot yield a zero size, so the !sve_state_size test goes with it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure
pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features
when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE,
which is left set. Later vCPUs on that VM then skip the SVE setup and
register with a NULL sve_state, which the guest's first FP access hands
to sve_load_state().
Return the error without touching vcpu_features. |
| In the Linux kernel, the following vulnerability has been resolved:
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size
is 0) is mounted, and performs shift operations using dictionarysize, the
shift exponent is -1, causing a shift-out-of-bounds.
Detail as below:
squashfs_comp_opts(msblk, buffer, length)
squashfs_xz_comp_opts()
if (comp_opts)
n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1
if (opts->dict_size != (1 << n) && opts->dict_size !=
(1 << n) + (1 << (n + 1))) <----shift-out-of-bounds
Fix it by adding a dictionary size range check before the shift operation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd_zbc: Reject disks with too many zones
sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and
stores the result in the unsigned int nr_zones field of struct
zoned_disk_info, silently truncating counts that exceed 32 bits. The
truncated count is later used to size per-zone resources, while the device
may still report more zones than fit.
Moreover, sd_zbc_report_zones() counts the reported zones with a signed int
zone_idx, which overflows past INT_MAX. Reject devices reporting more than
INT_MAX zones at scan time; such a device is not realistic for any medium
that exists today, and accepting it produces inconsistent zone bookkeeping. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump()
When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP
without freeing its skb argument. This leaks the cloned skb and also
prevents nxp_set_ind_reset() from being called to perform recovery.
Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC))
call with IS_ENABLED(CONFIG_DEV_COREDUMP). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel
In send_cancel(), pending mesh_tx objects are removed from the
hdev->mesh_pending list and freed via mesh_send_complete(). However, if
a mesh transmission was already queued onto hdev->cmd_sync_work_list via
mesh_next(), the queued entry retains a raw pointer to mesh_tx.
When hci_cmd_sync_work later processes the entry, it attempts to execute
mesh_send_sync and its destroy callback mesh_send_start_complete using
the already freed mesh_tx pointer, leading to a use-after-free.
Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the
target mesh_tx before completing it. If the entry is found and dequeued,
its destroy callback will complete and free the object; otherwise,
mesh_send_complete() is called directly.
Additionally, ensure the transmission queue advances after cancellation
or errors. In mesh_send_start_complete(), call mesh_next() on error
unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds
hdev->cmd_sync_work_lock and calling mesh_next() synchronously would
deadlock. Instead, advance the queue in send_cancel() once the lock is
released and if no transmission is in progress. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Fix payload page pool error cleanup
The payload page pool pointer contains an error pointer when its
allocation fails. The cleanup path passes that error pointer to
page_pool_destroy() instead of destroying the header page pool. This
can dereference the error pointer and leave the header page pool
allocated.
Destroy the header page pool instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve packet pointer class displacement in regsafe()
regsafe() maps packet pointer IDs between states and checks that each
current register range is a subset of the corresponding explored
register range. It does not, however, preserve the displacement between
registers that share a packet pointer ID.
This is unsound because packet range is shared by ID. A bounds check on
one class member updates every member, and a later access can consume the
range through another member. Commit 022ac0750883 ("bpf: use reg->var_off
instead of reg->off for pointers") folded the fixed pointer offset into
r64 and removed the old off equality check, so two individually narrower
registers can prune even when their displacement has changed. The
explored path can then license an out-of-bounds packet access on the
pruned path.
Require matching range bases for packet pointers with an ID. Together
with the existing ID mapping, this preserves the displacement between
members of each packet-pointer class without adding per-ID state.
Packet pointers without an ID remain unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Restrict CO-RE poisoning to relocatable instructions
CO-RE relocation records can name any instruction offset. When a
relocation cannot be resolved, bpf_core_patch_insn() currently poisons its
target before checking whether that instruction is a valid relocation
target. Malformed metadata can therefore replace jumps, calls, exits,
register-source arithmetic, or non-immediate loads instead of failing at
the relocation step.
Handle poisoning only after the instruction has passed the same class and
operand-form checks used for a resolved relocation. Route invalid forms
through the existing diagnostic and return a hard error. Keep poisoning
supported instructions, including both halves of a plain ldimm64, so an
unresolved relocation in dead code remains valid.
Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return
its status directly from each validated instruction case. This avoids
routing the success path through a common label and leaves the helper free
to report errors.
The shared relocation code applies this restriction to both libbpf and
in-kernel CO-RE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure
If register_netdev() fails for one of the MTK_MAX_DEVS devices in
mtk_probe(), the error path jumps to err_deinit_ppe, skipping
mtk_unreg_dev(). The previously registered net_devices are then freed by
mtk_free_dev() while still in NETREG_REGISTERED state, hitting the
BUG_ON(dev->reg_state != NETREG_UNREGISTERED).
Route the register_netdev() failure to err_unreg_netdev so the net_devices
registered so far are properly unregistered before being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: keep rtnl_lock for the ioctl self test
An offline self test that brings the interface down and back up with
netif_close() / netif_open() requires rtnl_lock for both. Since the
ethtool IOCTL path became rtnl-optional for ops-locked drivers, the
ETHTOOL_TEST ioctl runs holding only the netdev instance lock, so on an
ops-locked driver the self test now tears the device down without
rtnl_lock.
With lockdep this reproduces deterministically on every offline self
test on such a driver; note the sole lock held is the instance lock, not
rtnl:
WARNING: suspicious RCU usage
net/core/netpoll.c:207 suspicious rcu_dereference_protected() usage!
1 lock held by ethtool/107:
#0: (&dev->lock){+.+.}, at: dev_ethtool
Call Trace:
netpoll_poll_disable
__dev_close_many
netif_close_many
netif_close
fbnic_self_test
dev_ethtool_locked
dev_ethtool
dev_ioctl
sock_ioctl
__x64_sys_ioctl
Without lockdep the same condition trips ASSERT_RTNL() in
__dev_close_many() / __dev_open(); that check only samples the global
rtnl state, so it can be masked by a concurrent rtnl holder, but the
device is still being reconfigured without the lock it requires.
The ethtool self_test is a legacy ioctl-only command, so an ETHTOOL_TEST
case is only needed on the ioctl path. Add an opt-in bit for drivers whose
self test needs rtnl_lock and set it on the ops-locked drivers whose
offline self test tears the interface down and up:
- fbnic (ops-locked via queue_mgmt_ops): fbnic_self_test() offline path
uses netif_close() / netif_open().
- bnxt (ops-locked via queue_mgmt_ops): bnxt_self_test() offline path
goes through bnxt_close_nic() / bnxt_half_open_nic() /
bnxt_half_close_nic() / bnxt_open_nic(), which close and reopen the
device. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Handle maximum standalone channels
Standalone channels use one NAPI vector for each Tx and Rx queue.
fbnic's allocation path excludes FBNIC_MAX_TXQS from that layout. A
64-Tx/64-Rx configuration therefore records 128 vectors but allocates
only 64, leaving NULL entries that resource setup dereferences.
Include the maximum vector count in standalone allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: use the Rx queue napi pointer to find the napi vector
The queue management ndos pick the napi vector for an Rx queue with:
nv = fbn->napi[idx % fbn->num_napi];
The issue is this is only correct in the cases where there are no
standalone Tx vectors. In those cases we were allocating the Tx vectors
first and then the Rx so the queues would be pointing to Tx NAPI vectors
instead of the Rx ones.
The mapping the ndos want is already recorded. fbnic_set_netif_napi()
publishes it with netif_queue_set_napi(), which stores the napi pointer
in netdev_rx_queue.napi, and fbnic_reset_netif_napi() clears it again.
Both run under the netdev instance lock that the queue management ndos
also hold, so the pointer can be read directly.
Use it and drop the divide. The pointer is NULL exactly while the
datapath is down, so fbnic_queue_mem_alloc() can reject that case rather
than reaching into freed state: netdev_rx_queue_restart() calls it
before it tests netif_running(), and fbnic_pm_suspend() leaves
netif_running() true across a PCIe recovery that never completes, so a
queue restart can arrive after fbnic_stop() has freed the rings and the
vectors. fbnic_stop() clears the association in
fbnic_reset_netif_queues() before fbnic_free_napi_vectors(), so the
NULL is always published first. fbnic_queue_start() and
fbnic_queue_stop() need no check of their own, as
netdev_rx_queue_reconfig() only reaches them once fbnic_queue_mem_alloc()
has succeeded under the same instance lock. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: reset num_napi when the napi vectors are freed
fbn->num_napi is the count of live napi vectors, each of which owns an
IRQ. The PM path had freed them without clearing the count.
fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the
IRQs, but leaves netif_running() true so resume knows to re-open. Resume
rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets
num_napi and __fbnic_open() re-allocates the vectors.
When the datapath is torn down but never rebuilt, num_napi is left
pointing at freed vectors under 2 different scenarios:
- a PCIe error recovery that fails (fbnic_err_slot_reset() ->
__fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so
.resume never runs; or
- an __fbnic_open() that fails partway on resume and unwinds, freeing
the vectors after fbnic_reset_queues() has already set num_napi.
The netdev is then running with num_napi > 0 but napi[] freed, and the
eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down()
and dereferences the freed vectors:
BUG: kernel NULL pointer dereference, address: 0000000000000210
RIP: fbnic_dbg_down+0x28
Clear num_napi when the vectors are freed: in the suspend teardown (a
good resume re-establishes it before __fbnic_open()) and on the resume
open failure. A redundant ndo_stop() then walks an empty napi[]. The
normal ndo_stop() down/up cycle is untouched and keeps num_napi for the
next ndo_open(). |
