| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix task_work add use-after-free with SQPOLL
For SQPOLL, the sqpoll thread runs task_work off its own list and
doesn't need to be told about it, so it can pop and complete a request
as soon as mpscq_push() has published it. If that was the last request
holding the ring alive, io_ring_exit_work() then frees the ctx, stops
the thread, and with it the tctx, while io_req_normal_work_add() is
still looking at both after the push:
BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510
Read of size 4 at addr ff11000000ca0000 by task repro/55
(...)
BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70
Write of size 8 at addr ff11000000c3bd00 by task repro/55
Hold an RCU read lock across the add, like io_req_local_work_add() already
does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings
as well before freeing the ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails
Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the
nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and
vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could
re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page.
Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure
KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request
is cleared on VM-Exit (including the "forced" case), i.e. there is no risk
of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request
trying to map the nested pages. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the logical key offset from persistent memory
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree->subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used. |
| Release of invalid pointer or reference in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. |
| Omnigent 0.3.0 before 0.14.0 contains a path traversal vulnerability that allows authenticated users to escape the workspace by setting os_env.cwd on nested sub-agents. Attackers can upload a bundle whose sub-agent uses an absolute or parent-traversing working directory, bypassing root-only validation in bundles.py, to read and write host files as the runner user. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: cancel deferred work items in thread exit
If there are deferred work items on the thread todo list, then they are
not cleaned up in the Thread::release() method. Thus, update the code to
clean up the work items even if they are deferred.
This can happen if the thread dies while it has an active outgoing
transaction. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: guard dc_sink dereferences in MST mode validation
dm_dp_mst_is_port_support_mode() reads
aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check,
and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads
aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL
check. dc_sink is cleared asynchronously on MST unplug, and both
functions run from paths that the driver's own comments document as
racing that teardown: the connector probe worker's ->mode_valid
callback and a compositor's atomic check, neither of which holds the
MST manager lock that the teardown path uses. The former does have an
existing dsc_aux NULL check, but dsc_aux isn't reliably cleared in
every path that clears dc_sink, so it doesn't cover this.
Fail the port-support check and skip the FRL conversion path when the
sink is already gone.
(cherry picked from commit 7c3db8da4e039698ae198c870712428644e965c7) |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
advance_nextseg() modifies the SRH Segments Left field and the IPv6
destination address without ensuring the packet data is writable.
seg6_next_csid_advance_arg() has the same problem when it advances the
NEXT-C-SID argument in the destination address.
The skb may be cloned, for example by an AF_PACKET socket receiving on
the ingress device. advance_nextseg() and seg6_next_csid_advance_arg()
then write into the packet data shared with the clone. A read from that
socket can return the modified packet instead of the received one. The
simplified path below shows this for advance_nextseg():
__netif_receive_skb_one_core
__netif_receive_skb_core
deliver_skb [orig: users=2, cloned=0]
packet_rcv
skb_clone clone queued to the AF_PACKET socket
consume_skb(orig) [orig: users=1, cloned=1]
ipv6_rcv
ip6_rcv_core skb_share_check: no-op [orig: users=1]
[...]
input_action_end_core
advance_nextseg writes into the data shared with the clone
Call skb_ensure_writable() in advance_nextseg() and in
seg6_next_csid_advance_arg() before they modify the packet data.
skb_ensure_writable() may reallocate skb->head, which invalidates the
pointers into the packet data taken before the call.
advance_nextseg() now returns a valid SRH pointer, or NULL if
skb_ensure_writable() fails.
seg6_next_csid_advance_arg() takes the pointer to the destination
address from the skb after skb_ensure_writable().
On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
| Time-of-check time-of-use (toctou) race condition in Reliable Multicast Transport Driver (RMCAST) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix command effects log lifetime for multipath heads
KASAN reported a use-after-free when an I/O passthrough command was sent
through a multipath namespace head after the controller path that first
created the head had been removed:
BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core]
Read of size 4 at addr ffff888141b14400 by task nvme/19811
nvme_command_effects+0x192/0x200 [nvme_core]
nvme_cmd_allowed+0x7e/0x1b0 [nvme_core]
nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core]
nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core]
Move the log cache to the subsystem, with one entry per command set. Both
controllers and namespace heads hold subsystem references, keeping their
log pointers valid until subsystem release. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still reference the cdev after the nvme_ns_head reference count
drops to 0 (and is freed).
This can be shown with an application which delays between opening the cdev
and issuing the ioctl while the NS head is being torn down:
# ./ioctl_file /dev/ng1n1 &
# waiting 10 seconds ....
# ./ini_nvme_teardown.sh
[ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target"
[ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target"
# now going to issue ioctl ....
[ 26.549285] ==================================================================
[ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40
[ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237
[ 26.553805]
[ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy)
[ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 26.554241] Call Trace:
[ 26.554245] <TASK>
[ 26.554248] dump_stack_lvl+0x68/0xa0
[ 26.554266] print_report+0x10d/0x5d0
[ 26.554276] ? __virt_addr_valid+0x21d/0x3f0
[ 26.554287] ? cdev_put.part.0+0x3d/0x40
[ 26.554292] kasan_report+0x96/0xd0
[ 26.554300] ? cdev_put.part.0+0x3d/0x40
[ 26.554307] cdev_put.part.0+0x3d/0x40
[ 26.554313] __fput+0x7bc/0xa70
[ 26.554322] fput_close_sync+0xd8/0x190
[ 26.554328] ? __pfx_fput_close_sync+0x10/0x10
[ 26.554337] __x64_sys_close+0x79/0xd0
[ 26.554344] do_syscall_64+0x117/0x6b0
[ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 26.554358] RIP: 0033:0x7f938c067727
[ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf
[ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727
[ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000
[ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78
[ 26.554397] </TASK>
[ 26.554399]
[ 26.575612] Allocated by task 100:
[ 26.575871] kasan_save_stack+0x24/0x50
[ 26.576157] kasan_save_track+0x14/0x30
[ 26.576418] __kasan_kmalloc+0x7f/0x90
[ 26.576668] __kmalloc_noprof+0x281/0x6c0
[ 26.576938] nvme_alloc_ns+0x7f7/0x3170
[ 26.577206] nvme_scan_ns+0x508/0x880
[ 26.577449] async_run_entry_fn+0x8c/0x350
[ 26.577723] process_scheduled_works+0xb6f/0x1a00
[ 26.578034] worker_thread+0x4ad/0xb40
[ 26.578283] kthread+0x34f/0x450
[ 26.578501] ret_from_fork+0x563/0x800
[ 26.578752] ret_from_fork_asm+0x1a/0x30
[ 26.579012]
[ 26.579124] Freed by task 237:
[ 26.579335] kasan_save_stack+0x24/0x50
[ 26.579596] kasan_save_track+0x14/0x30
[ 26.579855] kasan_save_free_info+0x3a/0x60
[ 26.580131] __kasan_slab_free+0x43/0x70
[ 26.580388] kfree+0x321/0x500
[ 26.580591] nvme_ns_head_chr_release+0x39/0x50
[ 26.580883] __fput+0x352/0xa70
[ 26.581095] fput_close_sync+0xd8/0x190
[ 26.581350] __x64_sys_close+0x79/0xd0
[ 26.581595] do_syscall_64+0x117/0x6b0
[ 26.581842] entry_SYSCAL
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add better pm_runtime error handling in func probe
Add a common error path in probe that balances the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request
As reported by Sashiko:
If a transport driver encounters a hardware error and returns a negative
error code such as -EPIPE, ret is implicitly promoted to size_t when
compared against size. This causes the negative error code to evaluate
as a large positive number, making the (ret > size) condition true.
This silently converts the hardware error into a success return value
and copies the unmodified buffer back, which could leave BPF programs
operating on uninitialized or stale data.
Fix this by casting size into ssize_t to return the actual negative
error code. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't run ops.dequeue() with a DSQ lock held
ops.dequeue() is invoked with the source user DSQ's lock still held on
the consume and move paths (scx_consume_dispatch_q(),
move_task_between_dsqs()). A BPF scheduler which locks the source user
DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq -
self-deadlocks.
ops.dequeue() can only call the "any" kfuncs and none of them can lock a
builtin DSQ, so the global and bypass paths can't deadlock; however,
all DSQ locks share one lockdep class, so iterating any user DSQ from
ops.dequeue() on those paths trips the recursion check.
Move the invocation after the DSQ unlock on all three paths.
SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer
so that the callback is invoked exactly once. |
| Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.28. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Pixelite Events Manager events-manager allows Leveraging Race Conditions.This issue affects Events Manager: from n/a through 7.4.7. |
