| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Drop __init from ECC setup paths for re-probe safety
Sashiko reports:
"Does suppressing sysfs unbinding fully prevent the execution of freed __init
memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the
probe is deferred until after __init memory is freed."
The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and
their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were
marked __init. These run from the probe path, which may execute after init
memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds
once a late/module dependency appears, or a manual unbind/rebind. Calling
__init code then dereferences freed memory. Remove __init so these functions
remain valid at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: save IRQ state in blkg_tryget_closest()
bio_set_dev() associates the bio with a blkg through bio_associate_blkg().
If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with
spin_lock_irq() and releases it with spin_unlock_irq(), which
unconditionally enables local interrupts.
Callers may call bio_set_dev() with interrupts already disabled, e.g.
dm-thin's pool_map() does so while holding pool->lock taken with
spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts
while pool->lock is still held, so an I/O completion softirq can run on
the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio()
-> complete_mapping_preparation()) and deadlock. lockdep reports this
as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage.
Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()")
fixed the same problem while the lock lived in blkg_lookup_create(), but
commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in
blkg_lookup_create()") moved the locking into blkg_tryget_closest() and
reverted it to spin_lock_irq().
Save and restore the caller's IRQ state instead. |
| Heap-based buffer overflow in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to disclose information over a network. |
| Photoshop Desktop is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. |
| Photoshop Desktop is affected by a Double Free vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix domain reference leak when DPRX read is canceled
tb_tunnel_one_dp() takes a domain reference which is only dropped once
tb_dp_tunnel_active() has run on the work queue. If that work is
cancelled that reference is leaked. Since
commit f5cc545f5969 ("thunderbolt: Wait for tb_domain_release() to
complete when driver is removed") instead of just leaking memory this
now also blocks in the completion wait forever when unbinding the
driver.
This can be triggered whenever a DP tunnel is torn down before the DPRX
read has completed, e.g. by unplugging within the timeout, and then
unbinding the driver.
That reference only exists to keep the domain around while the DPRX work
is scheduled so let the work itself own it: take it in tb_dp_dprx_start()
and drop it in both places that end the work. Get/put are then paired
inside the same file and it doesn't matter anymore if the callback ever
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Make the DP tunnel activation callback mandatory
tb_tunnel_alloc_dp() takes an optional callback which is run from
dprx_work once the DPRX capabilities read has completed. Without that
callback tb_dp_dprx_start() reads the capabilities synchronously and
never queues the work. It however always takes a tunnel reference which
is only dropped by dprx_work itself or by tb_dp_dprx_stop() when
cancel_delayed_work() actually canceled that work. That reference is
thus leaked for every tunnel without a callback.
The only tunnels without one are those from tb_tunnel_discover_dp(),
which are activated again when restoring from hibernation.
Pass the callback to tb_tunnel_discover_dp() as well and drop the
synchronous path such that the DPRX capabilities are always read from
dprx_work. Hibernation restore then also no longer blocks for up to 12
seconds while waiting for that read to complete.
Also fix up the KUnit tests. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Hold a router reference for each allocated HopID
tb_stop() drops the reference to all DP tunnels but does not deactivate
them, thus nothing cancels a dprx_work still in flight (which holds its
own tunnel reference) and the tunnel can outlive tb_switch_remove(). The
HopID releases in tb_path_free() then operate on freed IDAs and trigger
warnings like
ida_free called for id=8 which is not allocated.
This can be triggered by unbinding the driver while a DP tunnel is still
waiting for the DPRX capabilities read to finish. On the Apple NHI
unplugging the cable runs into just that reliably because the read can
never finish right now and because the unplug powers down the entire
USB4 complex and removes the NHI device.
Take a router reference whenever an input or output HopID is allocated
and drop it again after the HopID is released. This keeps the ports and
their HopID IDAs alive for as long as they are used.
The KUnit tests allocate routers without ever registering their devices
so initialize the embedded struct device there as well and drop its
initial reference when the test is finished. |
| Missing Authorization vulnerability in WPGraphQL WPGraphQL wp-graphql allows Retrieve Embedded Sensitive Data.This issue affects WPGraphQL: from n/a through 2.23.1. |
| The Animated Number Counters plugin for WordPress is vulnerable to generic SQL Injection via the 'counterid' parameter in all versions up to, and including, 3.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with editor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order SQL injection: the write path correctly uses $wpdb->prepare(), but that protection is not carried forward to the read path, where the retrieved value is concatenated unsanitized into unprepared queries in both a single-quoted string context and a bare numeric context. |
| Heap-based buffer overflow in Windows Error Reporting allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in DNS Server allows an authorized attacker to disclose information over a network. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.1.0 via the 'ID' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with author-level access and above, to modify arbitrary courses created by other instructors — overwriting their title, content, and status — and reassign ownership of those courses to themselves. This is possible because Input::sanitize_array() preserves attacker-supplied POST keys (including 'ID') without stripping them, and WordPress interprets a non-empty ID in the wp_insert_post() argument array as an update to the existing post rather than a new insert. |
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. |
| A flaw was found in xorg-x11-server. The GLX (OpenGL Extension to the X Window System) interface fails to verify that incoming data sizes do not exceed allocated buffer limits when handling large rendering requests. An authenticated local client can exploit this vulnerability by sending a specially crafted request, triggering a heap-based buffer overflow. Successful exploitation can result in arbitrary code execution with the privileges of the X server or cause a Denial of Service (DoS) by crashing the application. |
| A flaw was found in xorg-x11-server. A local authenticated client can exploit this flaw by sending a crafted input device ungrab request with an unvalidated modifier value. This lack of validation causes the server to perform an out-of-bounds write on the heap, resulting in memory corruption that can lead to a denial of service (DoS) or potential arbitrary code execution. |
| A flaw was found in xorg-x11-server. An authenticated local user can trigger an out-of-bounds heap memory read by sending specially crafted X Keyboard Extension (XKB) requests with inconsistent key range parameters. This flaw leads to information disclosure, allowing the user to read sensitive data from the server's heap memory. |
| A flaw was found in xorg-x11-server. A local user can exploit a use-after-free condition—where the software attempts to access memory after it has been freed—by establishing a passive input grab and removing an input device. When subsequent input events are processed, the server dereferences the dangling device pointer. This flaw can lead to arbitrary code execution or a Denial of Service (DoS) via an X server crash. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq
Referencing the last interrupt inserted in an LR is rather fragile, as
this interrupt can vanish if a concurrently unmapped LPI.
Solve this by bumping up the refcount on the interrupt when populating
last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are
being reclaimed. |
