| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway. |
| Memory overflow in Packet Processing can lead to unpredictable or erroneous behavior or Denial of Service in NetScaler ADC and NetScaler Gateway. |
| Memory overflow in the management plane can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Memory corruption in DNS / DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| A vulnerability was detected in D-Link DIR-600L 2.17/2.17b02. Affected by this vulnerability is the function authenticationcgi_main of the file authentication.cgi. Performing a manipulation of the argument id/password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. |
| A security vulnerability has been detected in sox_ng up to 14.8.1. Affected by this issue is the function read_samples_voc of the file src/voc.c of the component VOC Decoder. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The name of the patch is 0b40408b. A patch should be applied to remediate this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability was found in DrayTek Vigor2960 1.5.1.6. This issue affects the function check_file_exist of the file /cgi-bin/mainfunction.cgi of the component File Existence Check. Performing a manipulation of the argument upload_name results in heap-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is capable of addressing this issue. Upgrading the affected component is recommended. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A vulnerability was detected in TRENDnet TEW-657BRM 1.00.1. This issue affects some unknown processing of the file /usr/sbin/upgrade_flash.cgi. Performing a manipulation of the argument boundary results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." |
| A security vulnerability has been detected in Edimax BR6478ACV2 1.23. The impacted element is the function formPPTPSetup of the file webs. The manipulation of the argument pptpUserName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Building a malicious package that uses cgo could bypass "#cgo LDFLAGS" validation and cause unexpected code execution at build time, or cause the go command to panic, via crafted quoting in "//go:cgo_ldflag" directives. When "cmd/cgo" generates "_cgo_gotypes.go", it quotes each "#cgo LDFLAGS" argument with strconv.Quote in a "//go:cgo_ldflag" directive, but "cmd/compile" and "cmd/go" parsed those directives by splitting on raw quote characters without handling backslash escapes or unquoting the string. This mismatch allowed disallowed linker flags or unvalidated linker search paths to be smuggled past the go command's flag checks and passed to the external linker. In addition, deduplicating LDFLAGS in the go command could panic with an out-of-bounds slice index when a prefix of the flag list matched near the end of the slice. "cmd/compile" and "cmd/go" now properly handle backslash-escaped quotes and unquote "//go:cgo_*" pragma strings with strconv.Unquote, and the slice bounds check in processCgoOutputs has been fixed. |
| OriginLab Origin Viewer OGM File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab Origin Viewer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-30770. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: reject short connection requests
nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a
struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The
iWARP path allocates exactly the peer-provided length, so a six-byte MPA
request reaches the parser and the hsqsize load reads two bytes past the
allocation.
Require the complete request structure before reading any of its fields.
The decoded KASAN report is:
BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41
Workqueue: iw_cm_wq cm_work_handler
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
cma_cm_event_handler (drivers/infiniband/core/cma.c:2181)
iw_conn_req_handler (drivers/infiniband/core/cma.c:2640)
cm_work_handler
(drivers/infiniband/core/cm.c:2502
drivers/infiniband/core/cm.c:3858)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Allocated by task 12:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_node_track_caller_noprof
(mm/slub.c:5414 mm/slub.c:5545)
kmemdup_noprof (mm/util.c:138)
cm_event_handler
(drivers/infiniband/core/iwcm.c:194
drivers/infiniband/core/iwcm.c:1076)
siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408)
siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750)
siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086)
The buggy address is located 0 bytes to the right of
allocated 6-byte region [ff1100010459d360, ff1100010459d366) |
| A vulnerability was determined in D-Link DIR-878 1.20B05. This impacts the function SetVLANSettings of the file prog.cgi of the component HNAP Handler. Executing a manipulation of the argument VID can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in D-Link DIR-878 1.20B05. This affects the function GetCAPTCHAsetting of the file bin/prog.cgi of the component HNAP Handler. Performing a manipulation of the argument uid results in heap-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Sandbox escape due to incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 160, Firefox ESR 115.45, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| In multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In thread_free of thread.c, there is a possible way to corrupt kernel heap metadata on thread creation failure due to memory corruption. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible way to trigger an out of bounds read via an attestation comparison oracle due to an incorrect bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |