| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27. An attacker in a privileged network position may be able to cause a denial-of-service. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server
(with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after
free of a `struct Curl_easy` object. |
| The Salon Booking System WordPress plugin before 10.31.11 does not prevent users holding its custom salon staff role from assigning arbitrary capabilities to other accounts when editing a customer, allowing them to escalate any account to administrator and take over the site. |
| WebITR developed by Uniong has a Insecure Deserialization vulnerability. Authenticated remote attackers can use the hard-coded cryptographic key to craft and submit malicious serialized data, thereby executing arbitrary code on the server. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service.
The impacted component is io.vertx:vertx-json-schema.
The following Vert.x modules depend on vertx-json-schema and are also affected:
io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mssql-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError.
The impacted component is io.vertx:vertx-pg-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention.
A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination.
The impacted component is io.vertx:vertx-mqtt. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application.
The impacted component is io.vertx:vertx-mysql-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist.
This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server.
Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible.
The impacted component is io.vertx:vertx-db2-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks.
The impacted component is io.vertx:vertx-gprc-server. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-pg-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mysql-client. |
| A missing critical step in authentication vulnerability in Apache Tomcat when the JNDI realm was configured with with a non GSSAPI SASL authentication mechanism allowed attackers to authenticate without providing the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, PipInvoke.get_pip_install_cmd() handles --seeder pip --download by calling get_wheel(download=False) and then allowing pip to consult the configured index, bypassing virtualenv's download_wheel() and verify_wheel_digest() path. When virtualenv's default-index PyPI digest comparison remains enabled, an index candidate matching the bundled package and version can therefore be selected without comparison to PyPI SHA-256 metadata. Explicit custom-index settings already opt out of that comparison and remain outside this verification-bypass claim; the demonstrated configuration used a non-PyPI index while leaving the index environment variables unset so the comparison policy remained active. This condition does not independently defeat TLS or establish control of the index response. This issue is fixed in version 21.14.9. |
| In Progress® Kendo® UI for jQuery releases starting with R1 2020 and prior to 2026.3.1015, the ListBox default item template renders the bound dataTextField value as raw HTML without encoding. An attacker who can modify the bound data can supply HTML containing event handlers that execute JavaScript in a user's browser when the affected list item is rendered. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery prior to 2026.3.1015, the TabStrip, Menu, and PanelBar components insert data source imageUrl values into single-quoted image src attributes without proper escaping. An attacker who can modify an image URL can inject additional HTML attributes, including event handlers, and execute JavaScript in a user's browser when the affected component renders the image. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. The earliest affected version has not been confirmed. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery versions starting with 2019.2.514 and prior to 2026.3.1015, the PanelBar component inserts data source item URL values into a single-quoted href attribute without proper encoding. An attacker who can control an item URL can inject additional HTML attributes, including event handlers, and execute JavaScript in a user's browser when the affected item is interacted with. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| The Azure Key Vault KMS provider in Kroxylicious accepts an untrusted vaultName from wire-deserialized EDEK bytes without format validation, enabling SSRF that exfiltrates the proxy's Azure bearer token to an attacker-controlled host. Token replay against the real Key Vault defeats the entire record-encryption trust model. |
