Search

Search Results (430018 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-16279 1 Dassault Systèmes 1 3dswymer 2026-08-28 9.3 Critical
An Improper Authorization vulnerability affecting 3DPassport in 3DSwymer from Release 3DEXPERIENCE R2023x through Release 3DEXPERIENCE R2026x could allow an attacker to gain access to some user accounts.
CVE-2026-80213 1 Ruby 1 Resolv 2026-08-28 4 Medium
An issue was discovered in the resolv gem before 0.7.2 for Ruby. Resolv::DNS::MessageEncoder wrote a DNS label's length into a single octet without checking its range. A label longer than 255 octets had its length stored modulo 256 but the label data was written unchanged, and thus the bytes on the wire described a different name than the one the application asked to encode. RFC 1035 section 2.3.4 limits a label to 63 octets, and the two high bits of the length octet are reserved for compression pointers. put_string packed the length with put_pack("C", d.length) and put_label used it for labels, and thus any value from 0 to 255 could end up as a label length octet, including the reserved 0x40-0xBF range and the 0xC0-0xFF pointer range. Resolv::DNS::Name.create did not check per-label or total name length either, and thus an attacker-controlled hostname reached the encoder unchanged. An application that resolves an attacker-controlled hostname sends a query whose wire bytes name a domain the attacker chose. A hostname suffix that the application validates against an allowlist becomes padding that never appears on the wire, and thus allowlist and egress checks can be bypassed. The recursive resolver caches the response under the attacker's name, and DNS logs record that name rather than the one the application asked for. A label length whose low octet lands in the 0xC0-0xFF range produces a length octet that conforming parsers read as the start of a compression pointer, with the following attacker-controlled byte as the offset.
CVE-2026-81094 1 Mcp-router 1 Mcp-router 2026-08-28 9.1 Critical
The mcp-router CLI served its MCP aggregator on every interface and enforced authentication only when the operator asked for it. The serve command in apps/cli/src/commands/serve.ts defaulted its host to the all-interfaces address on a fixed port, and required a token only when the corresponding flag was supplied, so a default invocation exposed the aggregator, and every MCP server it fronted, to anyone able to reach the port. Release 0.6.3 defaults the host to the loopback address and refuses to start without a token whenever the host it is given is not a loopback address; no earlier release carries either check.
CVE-2026-73827 1 Saitodev 1 Soy Calendar 2026-08-28 N/A
SOY Calendar contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product.
CVE-2026-81097 1 Maquina-app 1 Rails-mcp-server 2026-08-28 8.4 High
The execute_ruby tool is documented as a read-only Ruby sandbox and is enforced by a pattern denylist together with replacements for the process-spawning methods on Kernel. The pseudo-terminal library's spawn entry points are neither in the denylist nor replaced, so a normal tool call could reach them and start a shell, executing commands as the account running the server and outside the guarded methods. The denylist was introduced with the tool in 1.4.0 and never covered those entry points through 1.6.0. Version 1.6.1 restricts the requires the sandbox permits to a data-only list and blocks dynamic dispatch to execution entry points; 2.0.0 removes the tool.
CVE-2026-81099 1 Timescale 1 Tiger-slack 2026-08-28 6.8 Medium
tiger-slack started its MCP HTTP transport without enabling the host allow-list the underlying SDK provides. mcp/src/httpServer.ts called the shared httpServerFactory helper and never set the DNS-rebinding-protection option, so the transport accepted a request whatever host it named, and a page in a browser could point a name it controlled at the address the server was bound to and drive the locally reachable Slack MCP server through the visitor's browser. The fix passes the option explicitly alongside a dependency update; the update alone would not have closed it. The repository publishes no release that brackets the fix, so the affected boundary is the commit preceding it.
CVE-2026-81102 1 Dropbox 1 Mcp-server-dash 2026-08-28 3.1 Low
The Dash MCP server bound its listener to the loopback address but never checked the host a request named. src/mcp_server_dash.py constructed the server for its network mode with the interface restricted to loopback and no transport-security settings, so a name that had been pointed at the loopback address still reached the listener while carrying the attacker's host name. A page in a visitor's browser could therefore drive the local server and invoke its company-search and file-detail tools under the Dropbox credential the server holds. Only the network mode was reachable this way; the standard input mode was not. The fix supplies transport-security settings that enable host checking and allow only the loopback name and port, rejecting other hosts before a tool runs. The repository publishes no versions, so the affected boundary is the commit preceding the fix.
CVE-2026-18717 1 Applied Systems Engineering 1 Ase2000 V2 2026-08-28 7.4 High
ASE2000 2.35 through 2.37 is vulnerable to an improper certificate validation vulnerability, which may allow an attacker to impersonate the trusted peer, complete the TLS handshake, and read or modify protected communications.
CVE-2026-71396 1 Bendix 10 Ec80esp+ 2nd Can, Ec80esp+ 6s/6m, Ec80esp+ Integrated Tpms and 7 more 2026-08-28 5.4 Medium
Bendix EC80 Brake ECU uses hard-coded credentials, which could allow an attacker to disable automatic traction control.
CVE-2026-44629 1 Genetec Inc. 1 Synergis Softwire 2026-08-28 7.9 High
Improper access control to the Synergis Softwire installation folder. This vulnerability affects Streamvault all-in-one appliances (SV-100E and SV-300E series) and Synergis Softwire installed on Windows servers.
CVE-2026-78499 1 Watchguard 1 Dimension 2026-08-28 N/A
A server-side request forgery (SSRF) vulnerability WatchGuard Dimension FTP Server Test configuration allows an authenticated privileged attacker to enumerate exposed network services on adjacent network systems.
CVE-2026-77838 1 Saitodev 1 Soy Calendar 2026-08-28 N/A
SOY Calendar contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product.
CVE-2026-73542 1 Seiko Epson Corporation 1 Multiple Seiko Epson Printers And Scanners 2026-08-28 3.7 Low
Multiple SEIKO EPSON printers and scanners contain revoked root certificates. A man-in-the-middle attack may allow an attacker to obtain communication data transmitted by the product. As for the details of the affected products and versions, refer to the vendor's information.
CVE-2026-66404 1 Ecovacs Robotics 2 Deebot Pro K1vac, Deebot Pro M1 2026-08-28 6.5 Medium
DEEBOT PRO M1 and DEEBOT PRO K1VAC do not validate server certificates in MQTT communications. Operation logs and activity logs stored on the affected products may be retrieved.
CVE-2026-66403 1 Ecovacs Robotics 2 Deebot Pro K1vac, Deebot Pro M1 2026-08-28 7.5 High
DEEBOT PRO M1 and DEEBOT PRO K1VAC leave the web server for debugging purposes enabled. The floor map and log information stored on the affected products may be retrieved.
CVE-2024-34517 1 Neo4j 1 Neo4j 2026-08-28 6.5 Medium
The Cypher component in Neo4j 5.0.0 through 5.18 mishandles IMMUTABLE privileges in some situations where an attacker already has admin access.
CVE-2026-79988 1 Craftcms 1 Cms 2026-08-28 N/A
The Twig sandbox mechanism in Craft CMS is configured to allow dangerous functionality from the Yii framework, leading to authenticated RCE similar to previously disclosed vulnerabilities.
CVE-2026-80567 1 Linux 1 Linux Kernel 2026-08-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred.
CVE-2026-80571 1 Linux 1 Linux Kernel 2026-08-28 7.0 High
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak In papr_phy_attest_create_handle(), the params->cmd.length is not validated before use, which can result in a buffer overlow. Check it and return -EINVAL if it is either 0 or exceeds sizeof(params->cmd). Also, params is freed on the success path but not error. Free it on errors after memory allocation. And free it on negative fd.
CVE-2026-80575 1 Linux 1 Linux Kernel 2026-08-28 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Input: cs40l50-vibra - validate custom data from user space cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect straight from the ff_effect the user passed to EVIOCSFF, without requiring it to hold anything: work_data.custom_data = memdup_array_user(periodic->custom_data, periodic->custom_len, sizeof(s16)); work_data.custom_len = periodic->custom_len; The driver then reads two words out of that buffer: custom_data[0] as the waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the index within the bank in cs40l50_effect_index_set(). Neither read is covered by a length check, and custom_len is fully user controlled: - custom_len == 0 makes memdup_array_user() call memdup_user() with a length of zero, which returns ZERO_SIZE_PTR rather than an error, so custom_data[0] dereferences it. - custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps effect->type out of the OWT case, and custom_data[1] is then read one word past the allocation. The bank value itself is also mishandled. It is masked with CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a custom_data[0] of 0x8000 or above wraps to a negative value that passes the "bank_type >= CS40L50_WVFRM_BANK_NUM" test. cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the switch statement's default case gets a chance to reject it: base_index = vib->dsp.banks[effect->type].base_index; max_index = vib->dsp.banks[effect->type].max_index; Require the two words the driver reads to be present, and hold the masked bank in a u32 so the existing upper-bound test covers the whole range. The da7280 haptic driver already range checks custom_len this way.