Export limit exceeded: 409447 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409447 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409447 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68175 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was added May 12th 2008. At that time, resources created in pipe_open() could not be freed because there was not pipe_close function pointer of the tracer. The pipe_close function pointer was added in December 7th, 2009, but the mmiotrace tracer was not updated. mmio_pipe_open() allocates a header_iter and takes a pci_dev reference when trace_pipe is opened. mmio_close() frees them, but it was only wired to the tracer's .close callback. tracing_release_pipe() invokes .pipe_close, not .close, when the trace_pipe file is released. As a result, closing trace_pipe with the mmiotrace tracer active leaked the header_iter allocation and left a stale pci_dev reference. Set .pipe_close to mmio_close, matching how function_graph wires both callbacks to the same handler. Note, if the trace_pipe is read to completion, it will clean up the resources, but if one were to run: # head -n 1 /sys/kernel/tracing/trace_pipe VERSION 20070824 Over and over again, it would trigger a massive leak. | ||||
| CVE-2026-68165 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function. | ||||
| CVE-2026-68164 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow overlapping input ranges for damon_set_regions() damon_set_regions() assumes the input ranges are sorted by the address and don't overlap each other. Hence the assumption was initially to be explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting") has mistakenly removed the validation. This can make DAMON behave in unexpected ways. At the best, the monitoring results snapshot will just look weird since there will be overlapping regions. DAMOS will also work weirdly, applying the same action multiple times for overlapping regions, and make DAMOS quota weird. More seriously, depending on the setup and regions updates sequence, negative size regions can be made. It will trigger WARN_ONCE() if the kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the monitoring results, the negative size region can further trigger division by zero in damon_merge_two_regions(). Note that some of the consequences including the WARN_ONCE() and the divide by zero depend on commits that were introduced after the root cause commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting"). Fix the problems by checking the assumption and returning an error if the input ranges don't meet the assumption. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-68160 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptrace, snaptrace + snaptrace_len, false, &realm)) { ... } ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad) with the attacker-supplied fake end e == snaptrace + snaptrace_len. With snaptrace_len == 0xFFFFFFFF the bound check is trivially satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past the legitimate msg->front buffer, and ri->num_snaps / ri->num_prior_parent_snaps then drive further out-of-bounds reads of the encoded snap arrays. The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks above the op switch each catch this OOB through their ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit behind a hdr.version-gated if, so a malicious or compromised MDS that sets msg->hdr.version = 1 reaches the IMPORT path with no version-gated decoder having validated snap_trace_len. The shape has been present since ceph_handle_caps() was introduced. Validate snap_trace_len against the message front buffer before consuming it, using the canonical ceph_decode_need() / ceph_has_room() helper. The helper bounds the length with subtraction (n <= end - p, guarded by end >= p) rather than pointer addition, so it is wrap-safe for the attacker-controlled u32 length on 32-bit builds where p + snap_trace_len could overflow the address space. This matches the rest of the ceph decode path (e.g. the pool_ns_len check a few lines below), and the existing goto bad cleanup already covers this exit path. | ||||
| CVE-2026-68158 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | ||||
| CVE-2026-68157 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bucket whose name exists in the CRUSH map while its type has no matching entry in type_names. get_immediate_parent() then dereferences a NULL type_cn and passes an invalid pointer into strcmp(), causing a null-ptr-deref. Skip such malformed parent buckets unless both the bucket name and type name metadata are present. This keeps malformed hierarchy data from crashing locality lookup and safely falls back to "not local". [ idryomov: add WARN_ON_ONCE ] | ||||
| CVE-2026-68154 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper. | ||||
| CVE-2026-68153 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown. | ||||
| CVE-2026-68151 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERP from a switch nested in the scan loop, so its break leaves the switch and not the loop. A binary carrying more than one PT_INTERP runs the case again and overwrites both interpreter_name and interpreter. The previous name allocation leaks and so does the previous interpreter reference, along with the write denial open_exec() took on it. The denial is never released, so the file stays unwritable for as long as the system runs. An unprivileged caller reaches this with a crafted binary and repeats it at will. binfmt_elf stops at the first PT_INTERP. Do the same here. The flaw dates back to the driver's introduction in the pre-git history tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF binary format driver"). | ||||
| CVE-2026-68147 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode eviction under direct reclaim. - fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It just zeroizes and frees the blk_crypto_key without calling blk_crypto_evict_key(). That causes a use-after-free. For now, let's fix this in the straightforward and easily-backportable way by switching to an on-stack array. Currently the fscrypt multi-device functionality is used only by f2fs, which has a hardcoded limit of 8 block devices. An on-stack array works fine for that. (Of course, this solution won't scale up to large number of block devices. For that we'd need a different solution, like moving the block device iteration into the filesystem. Or in the case of btrfs, which will only support blk-crypto-fallback, we should make it just call blk-crypto-fallback directly, so the block devices won't be needed.) | ||||
| CVE-2026-68144 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one. | ||||
| CVE-2026-68137 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/struct x25_sock. Take sock_hold(s) while x25_list_lock still proves that the list entry is live, then drop the temporary reference after the socket has been locked, rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(), because another path may have disconnected the socket before this path acquired the socket lock. Restart the list walk after each disconnect because the list lock was dropped and the previous iterator state may no longer be valid. A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in x25_kill_by_neigh(). | ||||
| CVE-2026-68135 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-68131 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | ||||
| CVE-2026-68125 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed. | ||||
| CVE-2026-68124 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.6 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68123 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved length instead and bound each consumer against the current skb length. Use U32_MAX as the no-truncation sentinel so the value remains valid if skb geometry changes before a consumer handles it. | ||||
| CVE-2026-68117 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | ||||
| CVE-2026-68115 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) | ||||
| CVE-2026-68111 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) | ||||