Export limit exceeded: 15373 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74578 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_skcipher - force synchronous processing on trees without ctx->state The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv directly into the skcipher request. After io_submit() the socket lock is dropped and the request is processed asynchronously, so a concurrent sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request run under an attacker-controlled IV. For CTR/stream modes this is IV/keystream reuse and lets an unprivileged user recover the plaintext of a concurrent operation. Snapshotting ctx->iv into per-request storage for the async path is not sufficient. For ciphers with statesize == 0 - which includes cbc and ctr - the MSG_MORE inter-chunk IV chaining is carried solely by the in-place req->iv writeback, which a snapshot redirects into per-request memory that af_alg_free_resources() releases on completion, silently producing wrong output. Writing the IV back from the completion callback instead is not possible either: that would require lock_sock() there, but the callback can run in softirq/atomic context, so it must not sleep. Make the operation synchronous instead, which removes both the IV race and any writeback race. This is equivalent to the upstream resolution, commit fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the AIO socket path across net/ entirely and so produces the same end state for this file. This patch deviates from that commit deliberately: rather than removing AIO socket support tree-wide, which would be far too invasive for stable, it removes only the AIO branch in crypto/algif_skcipher.c. io_submit() now completes synchronously; AF_ALG async is rarely used in practice. The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless, and is left alone to keep the fix minimal. Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000 after the change; MSG_MORE chunked CTR output bit-identical to single-shot. | ||||
| CVE-2026-72122 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72128 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. | ||||
| CVE-2026-74500 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-68467 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mchp23k256: use SPI match data for chip caps The driver stores chip capacity information in both the OF match table and the SPI id table. Probe currently uses of_device_get_match_data(), so a non-OF SPI modalias match falls back to mchp23k256_caps even when the SPI id table selected a different part. Use spi_get_device_match_data() so SPI id-table driver_data is consumed when OF match data is absent. This keeps the existing default fallback while avoiding the wrong MTD geometry for id-table-only matches. | ||||
| CVE-2026-68471 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ieee80211: validate MLE common info length ieee80211_mle_common_size() uses the first common-info octet as the common information length for all known MLE types. However, ieee80211_mle_size_ok() only validates that octet for Basic, Probe Request, and TDLS MLEs. Reconfiguration MLEs also skipped the length octet when calculating the minimum common size, and Priority Access MLEs skipped validation of the advertised common information length. Account for the Reconfiguration common-info length octet and validate the advertised common information length for all known MLE types. Keep unknown-type handling unchanged. [remove now misleading comment] | ||||
| CVE-2026-68474 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access() spufs_mem_mmap_access() computes the local store offset as address - vma->vm_start, but bounds-checks it against vma->vm_end instead of the local store size. On 64-bit, offset is always well below vma->vm_end, so the clamp never fires and len stays unbounded against the LS_SIZE buffer returned by ctx->ops->get_ls(). Reject offsets at or beyond LS_SIZE and clamp len to the remaining space, mirroring the guard already used by spufs_mem_mmap_fault() and spufs_ps_fault(). | ||||
| CVE-2026-72071 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Fix use-after-free in user_event_mm_dup() user_event_mm_dup() walks the parent mm's enabler list locklessly under rcu_read_lock() during fork() (from copy_process()); it does not take event_mutex: rcu_read_lock(); list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link) enabler->event = user_event_get(orig->event); user_event_enabler_destroy() removes an enabler from that list with list_del_rcu() and then, without waiting for a grace period, drops the enabler's user_event reference with user_event_put() and frees the enabler with kfree(). A reader that loaded the enabler before the list_del_rcu() can still be walking it, which leads to two use-after-frees: - kfree(enabler) frees the enabler while that reader dereferences enabler->event. - user_event_put() may drop the last reference to the user_event, which is then freed (via delayed_destroy_user_event() on a work queue), while the same reader does user_event_get(orig->event) on it. Both are reachable by an unprivileged task that can open user_events_data: one multithreaded process that registers an enabler and then concurrently unregisters it and calls fork() triggers the race. KASAN reports a slab-use-after-free in user_event_mm_dup() during clone(), with a "refcount_t: addition on 0" warning when the user_event is freed. The enabler use-after-free was found first; the user_event one was reported by XIAO WU, and the earlier enabler-only fix did not address it. Defer both the user_event_put() and the kfree(enabler) to a work item queued with queue_rcu_work(), so they run only after an RCU grace period, once all readers walking the enabler list have finished. The put must run in process context because user_event_put() takes event_mutex on the last reference, so a work queue is used rather than call_rcu(). The now-unlocked put lets the locked argument of user_event_enabler_destroy() be removed; all callers are updated. | ||||
| CVE-2026-72018 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | ||||
| CVE-2026-13460 | 2 Ibm, Linux | 2 Storage Scale, Linux Kernel | 2026-08-17 | 7.5 High |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 GUI contains a hardcoded token in the source code, which was used for inter-node cluster communication and REST API authentication between GUI. | ||||
| CVE-2026-64244 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. | ||||
| CVE-2026-72090 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Use caller client for debug BO sync amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls amdxdna_hwctx_sync_debug_bo(), but passes abo->client. amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle namespace for debug_bo_hdl and as the owner of the hardware context xarray. Those must match the file that supplied args->handle. The BO's stored client pointer is object state, not the ioctl context. Pass filp->driver_priv instead, matching the original handle lookup. | ||||
| CVE-2026-72232 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | ||||
| CVE-2026-72025 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. | ||||
| CVE-2026-72151 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret() without installing a completion callback, discards both return values, and immediately frees the kpp_request via kpp_request_free(). When the resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE, keembay-ocs), either operation returns -EINPROGRESS and the deferred completion worker dereferences the freed request. The path fires automatically from the hwrng_fillfn kernel thread via tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session -> tpm_buf_append_salt on every entropy poll, without any userland action. Install crypto_req_done as the completion callback, wrap both KPP operations in crypto_wait_req(), and propagate errors to the caller. The wait is a no-op for synchronous backends. | ||||
| CVE-2026-68458 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: cache secctx size before release zeroes it binder_transaction() bounds the scatter-gather buffer area with sg_buf_end_offset and subtracts the aligned LSM context size because the secctx is written at the tail of that area. The subtraction reads lsmctx.len, but that field has already been cleared by the time the line runs: security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */ lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64)) extra_buffers_size += lsmctx_aligned_size ... security_release_secctx(&lsmctx) /* memset zeroes len */ ... sg_buf_end_offset = sg_buf_offset + extra_buffers_size - ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */ security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len reads back as 0 and the subtraction contributes nothing, leaving sg_buf_end_offset too large by the aligned secctx size on every transaction to a txn_security_ctx node. Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset - sg_buf_offset as the sole upper bound on its copy, so the inflated end offset lets the copy run into the bytes that already hold the secctx. The aligned size must therefore be cached before release rather than re-read from the now-cleared field. Fix by caching it in lsmctx_aligned_size at function scope when it is first computed and subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after release. Reuse the same value for the earlier buf_offset computation. | ||||
| CVE-2026-72296 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ife: require ETH_HLEN to be pullable in ife_decode() ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. | ||||
| CVE-2026-72303 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | ||||
| CVE-2026-72130 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into the rval[] flexible-array tail, so the minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its existing variable-length guard in nvmet_auth_challenge(). This is reachable only when in-band DH-HMAC-CHAP authentication is configured on the target. | ||||