| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read in BranchCache allows an unauthorized attacker to deny service over a network. |
| Heap-based buffer overflow in Microsoft Standard XPS allows an authorized attacker to elevate privileges over a network. |
| Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection
address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices
will open its ADS session, including any configured route credentials, to that host.
Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram:
- In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported.
- In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response.
- The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response.
Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items.
This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't predict JMP32 pointer vs zero comparisons
Consider the following program:
r1 = map_value; /* low 32 bits are zero at runtime */
r6 = 0xdead000000000000;
if w1 != 0 goto l1;
l0: r1 += r6;
r2 = *(u64 *)(r1 + 0);
exit;
l1: r6 = 0;
goto l0;
At the moment is_branch_taken() reports the jump as always taken,
because it does not distinguish between BPF_JMP and BPF_JMP32
comparisons when processing 'if w1 != 0 ...'. |
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_447CAC component |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead. |
| Improper Validation of Unsafe Equivalence in Input vulnerability in Liquid Web / StellarWP GiveWP allows Authentication Bypass.
This issue affects GiveWP: from n/a through 4.16.9. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| NVIDIA ConnectX and Bluefield contain a vulnerability in a control register, where a user with VF access could cause improper access control for the register interface by sending a malicious command to the firmware. A successful exploit of this vulnerability might lead to denial of service. |
| OpenClaw versions before 2026.8.1 fail to neutralize spreadsheet formula characters in participant display names within attendance CSV exports. Attackers can inject formula-like cells that execute with spreadsheet user permissions when the export is opened in formula-enabled applications. |
| A DHCP server, or anyone on the LAN who answers a DISCOVER first, can make the client read about a
kilobyte past the end of the received message.
The option walk keeps a pointer and an offset in step, and the only bound check uses the offset:
```c
/* addons/dhcp/nxd_dhcp_client.c:7538, 7572 */
while (i < length - 1)
{
...
size = *(++data); /* data moves 1: type -> length byte */
data += size + 1; /* data moves size + 1 more */
i += size + 1; /* i moves only size + 1 */
}
```
A TLV option occupies size + 2 bytes. `data` is advanced by size + 2 in total, `i` by size + 1, so
the offset falls one byte behind the real read position for every option the walk skips. After
enough skipped options the check `i < length - 1` still holds while `data` is already past the end
of the message, and the subsequent read of the type and length bytes comes from whatever follows.
A single OFFER carrying a long run of skippable options is enough:
```
ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1 at 0x61b000000794 thread T5
#0 _nx_dhcp_search_buffer addons/dhcp/nxd_dhcp_client.c:7541
#1 _nx_dhcp_get_option_value addons/dhcp/nxd_dhcp_client.c:7082
0x61b000000794 is located 164 bytes to the right of 1648-byte region
```
A well formed OFFER through the same path is handled normally, the client records the offer and
moves to REQUESTING, so the difference is the option layout rather than the harness.
The read runs in the DHCP client thread while the client is still unconfigured, so it happens on
every boot in reach of a hostile DHCP responder. The values read are used to configure the
interface, which is how the disclosed bytes become observable.
Advance `i` by size + 2, or derive the bound from `data` rather than keeping a second counter. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, a connection configured to permit mac=none can negotiate it with a MAC-requiring CTR or CBC block cipher because the selection logic validates needs_mac() only when MAC selection fails. A remote peer can then send a packet with a decrypted length of zero, causing russh/src/cipher/mod.rs to shrink the previously read block before indexing buffer.buffer[16..], which panics and terminates the connection task. This issue is fixed in version 0.63.1. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| ZoneMinder before 1.38.4 contains static buffer overflow vulnerabilities in RemoteCameraHttp::GetResponse() that allow malicious HTTP cameras or intercepting attackers to overflow fixed-size buffers by sending oversized response headers. Attackers can send crafted HTTP responses with oversized status messages, Connection headers, Content-Type values, or multipart boundaries to corrupt parser state and crash the capture process or corrupt memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject oversized tx_queue_len at netlink parse time
rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len
without going through netif_change_tx_queue_len(), so a device created
with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and
still triggers the oversized ring allocations in pfifo_fast, tun and
tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the
RTM_NEWLINK-on-existing-device path reach the same sinks.
Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes
NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with
txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers
parse against this policy - rtnl_setlink(), rtnl_newlink() (create
and change), and the veth peer nest - so every netlink path is capped
at parse time and rejects the attribute with -ERANGE plus a proper
"integer out of range" extack message before any device state is
modified (the RTM_SETLINK half-application wart is gone with it).
Document the bound in the rt-link.yaml netlink spec.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn):
ip link add v0 txqueuelen 500000 type veth peer name v1
-> on the fixed kernel this is rejected with -ERANGE ("integer out
of range" extack) instead of installing an oversized tx_queue_len
that later inflates pfifo_fast/tun/tap ring allocations.
- ip link set v0 txqueuelen 500000 is likewise rejected at parse time. |
| Heap-based buffer overflow in Active Directory Domain Services allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| Out-of-bounds read in Microsoft Standard XPS allows an authorized attacker to disclose information locally. |
