| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OCS Inventory NG 2.3.0.0 contains an unquoted service path vulnerability that allows local attackers to escalate privileges to system level. Attackers can place a malicious executable in the unquoted service path and trigger the service restart to execute code with elevated system privileges. |
| Emerson ValveLink Products store
sensitive information in cleartext within a resource that might be accessible to another control sphere. |
| AspEmail 5.6.0.2 contains a binary permission vulnerability that allows local users to escalate privileges through the Persits Software EmailAgent service. Attackers can exploit full write permissions in the BIN directory to replace the service executable and gain elevated system access. |
| Flatnux 2021-03.25 contains an authenticated file upload vulnerability that allows administrative users to upload arbitrary PHP files through the file manager. Attackers with admin credentials can upload malicious PHP scripts to the web root directory, enabling remote code execution on the server. |
| Emerson ValveLink products
do not use or incorrectly uses a protection mechanism that provides
sufficient defense against directed attacks against the product. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| A low-privileged attacker can remotely access the PKI folder of the CODESYS Control runtime system and thus read and write certificates and its keys. This allows sensitive data to be extracted or to accept certificates as trusted. Although all services remain available, only unencrypted communication is possible if the certificates are deleted. |
| The Honeywell Experion PKS contains an Integer Underflow
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation, which could result in improper integer data value checking during subtraction leading to a denial of service.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. |
| The Honeywell Experion PKS
and OneWireless WDM
contains a Deployment of Wrong Handler
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation,
which could result in incorrect handling of packets leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| The All-Images.ai – IA Image Bank and Custom Image creation plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the '_get_image_by_url' function in all versions up to, and including, 1.0.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A BPv7 bundle with a malformed extension block causes uncontrolled memory allocation inside ION-DTN 4.1.3s, leading to receiver thread termination and a Denial-of-Service (DoS). The triggering bundle contains an extension block starting at `0x85070201005bbb0e20b4ea001a000927c0...`. The first byte in the extension block (0x85) indicates a CBOR array of five elements of which the first four are numbers (0x07, 0x02, 0x01, 0x00) but the fifth element is a byte string of length 27 (`0x5bbb0e20b4ea001a000927c0...`). The vulnerability seems to be due to processing the fifth element of the array (i.e., the byte string) as replacing it with a number makes the vulnerability no longer be triggered. While parsing this extension block, ION obtains a very large block length, which in the code in `bei.c`:764) seems to be passed from `blockLength` which is an unsigned int, to a 32 bit signed integer `blkSize`. The unsigned to signed conversion causes `blkSize` to hold the value of -369092043, which is then converted into a 64-bit unsigned value inside `MTAKE(blkSize)`, resulting in an attempt to allocate an unrealistic amount of memory, causing the error. As of time of publication, no known patched versions of BPv7 exist. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| Server-Side Request Forgery (SSRF) in Omnissa Secure Email Gateway (SEG) in SEG prior to 2.32 running on Windows and SEG prior to 2503 running on UAG allows routing of network traffic such as HTTP requests to internal networks. |
| Missing authentication for critical function vulnerability exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, a remote unauthenticated attacker may obtain the product configuration information including authentication information. |
| Dosage is a comic strip downloader and archiver. When downloading comic images in versions 3.1 and below, Dosage constructs target file names from different aspects of the remote comic (page URL, image URL, page content, etc.). While the basename is properly stripped of directory-traversing characters, the file extension is taken from the HTTP Content-Type header. This allows a remote attacker (or a Man-in-the-Middle, if the comic is served over HTTP) to write arbitrary files outside the target directory (if additional conditions are met). This issue is fixed in version 3.2. |
| (conda) Constructor is a tool that enables users to create installers for conda package collections. In versions 3.12.2 and below, the installation directory inherits permissions from its parent directory. Outside of restricted directories, the permissions are very permissive and often allow write access by authenticated users. Any logged in user can make modifications during the installation for both single-user and all-user installations. This constitutes a local attack vector if the installation is in a directory local users have access to. For single-user installations in a shared directory, these permissions persist after the installation. This issue is fixed in version 3.13.0. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. In versions 4.2.0 through 7.5.3, and 8.0.0 through 8.3.1-alpha.1, there is a Server-Side Request Forgery (SSRF) vulnerability in the file upload functionality when trying to upload a Parse.File with uri parameter, allowing execution of an arbitrary URI. The vulnerability stems from a file upload feature in which Parse Server retrieves the file data from a URI that is provided in the request. A request to the provided URI is executed, but the response is not stored in Parse Server's file storage as the server crashes upon receiving the response. This issue is fixed in versions 7.5.4 and 8.4.0-alpha.1. |
| The following versions of Spring Cloud Gateway Server Webflux may be vulnerable to the ability to expose environment variables and system properties to attackers.
An application should be considered vulnerable when all the following are true:
* The application is using Spring Cloud Gateway Server Webflux (Spring Cloud Gateway Server WebMVC is not vulnerable).
* An admin or untrusted third party using Spring Expression Language (SpEL) to access environment variables or system properties via routes.
* An untrusted third party could create a route that uses SpEL to access environment variables or system properties if: * The Spring Cloud Gateway Server Webflux actuator web endpoint is enabled via management.endpoints.web.exposure.include=gateway and management.endpoint.gateway.enabled=trueor management.endpoint.gateway.access=unrestricte.
* The actuator endpoints are available to attackers.
* The actuator endpoints are unsecured. |
| On IROAD v9 devices, the dashcam has hardcoded default credentials ("qwertyuiop") that cannot be changed by the user. This allows an attacker within Wi-Fi range to connect to the device's network to perform sniffing. |
| Agentflow developed by Flowring has an Use of Hard-coded Cryptographic Key vulnerability, allowing unauthenticated remote attackers to exploit the fixed key to generate verification information, thereby logging into the system as any user. Attacker must first obtain an user ID in order to exploit this vulnerability. |