| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffalo LS520D 4.53 is vulnerable to Arbitrary file read, which allows unauthenticated attackers to access the NAS web UI and read arbitrary internal files. |
| IXON VPN Client before 1.4.4 on Windows allows Local Privilege Escalation to SYSTEM because there is code execution from a configuration file that can be controlled by a low-privileged user. There is a race condition in which a temporary configuration file, in a world-writable directory, can be overwritten. |
| A vulnerability affecting HPE Networking Instant On Access Points has been identified where a device processing a specially crafted packet could enter a non-responsive state, in some cases requiring a hard reset to re-establish services. A malicious actor could leverage this vulnerability to conduct a Denial-of-Service attack on a target network. |
| A vulnerability in the router mode configuration of HPE Instant On Access Points exposed certain network configuration details to unintended interfaces. A malicious actor could gain knowledge of internal network configuration details through inspecting impacted packets. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
When running perf_fuzzer on PTL, sometimes the below "unchecked MSR
access error" is seen when accessing IA32_PMC_x_CFG_B MSRs.
[ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30)
[ 55.611280] Call Trace:
[ 55.611282] <TASK>
[ 55.611284] ? intel_pmu_config_acr+0x87/0x160
[ 55.611289] intel_pmu_enable_acr+0x6d/0x80
[ 55.611291] intel_pmu_enable_event+0xce/0x460
[ 55.611293] x86_pmu_start+0x78/0xb0
[ 55.611297] x86_pmu_enable+0x218/0x3a0
[ 55.611300] ? x86_pmu_enable+0x121/0x3a0
[ 55.611302] perf_pmu_enable+0x40/0x50
[ 55.611307] ctx_resched+0x19d/0x220
[ 55.611309] __perf_install_in_context+0x284/0x2f0
[ 55.611311] ? __pfx_remote_function+0x10/0x10
[ 55.611314] remote_function+0x52/0x70
[ 55.611317] ? __pfx_remote_function+0x10/0x10
[ 55.611319] generic_exec_single+0x84/0x150
[ 55.611323] smp_call_function_single+0xc5/0x1a0
[ 55.611326] ? __pfx_remote_function+0x10/0x10
[ 55.611329] perf_install_in_context+0xd1/0x1e0
[ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10
[ 55.611333] __do_sys_perf_event_open+0xa76/0x1040
[ 55.611336] __x64_sys_perf_event_open+0x26/0x30
[ 55.611337] x64_sys_call+0x1d8e/0x20c0
[ 55.611339] do_syscall_64+0x4f/0x120
[ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed. |
| Versions of the package expand-object from 0.0.0 are vulnerable to Prototype Pollution in the expand() function in index.js. This function expands the given string into an object and allows a nested property to be set without checking the provided keys for sensitive properties like __proto__. |
| A prototype pollution in the lib.set function of dref v0.1.2 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| A Secure Boot Bypass Vulnerability exists in affected Access Points that allows an adversary to bypass the hardware root of trust verification in place to ensure only vendor-signed firmware can execute on the device. An adversary can exploit this vulnerability to run modified or custom firmware on affected Access Points. |
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. |
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. |
| A vulnerability in the cryptographic logic used by HPE Aruba Networking EdgeConnect SD-WAN Gateways could allow an authenticated remote attacker to gain shell access. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system, potentially leading to unauthorized access and control over the affected systems. |
| A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN Gateways Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system. |
| A broken access control vulnerability exists in HPE Aruba Networking EdgeConnect OS (ECOS). Successful exploitation could allow an attacker to bypass firewall protections, potentially leading to unauthorized traffic being handled improperly |
| Missing authorization in the installer for Zoom Workplace for Windows on ARM before version 6.5.0 may allow an authenticated user to conduct an escalation of privilege via local access. |
| A vulnerability in the command-line interface of HPE Aruba Networking EdgeConnect SD-WAN Gateways could allow an authenticated remote attacker to escalate privileges. Successful exploitation of this vulnerability may enable the attacker to execute arbitrary system commands with root privileges on the underlying operating system. |
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. |
| Improper access restrictions in HCL BigFix Remote Control Server WebUI (versions 10.1.0.0248 and lower) allow non-admin users to view unauthorized information on certain web pages. |
| BatchSignCS, a background Windows application developed by WellChoose, has an Arbitrary File Write vulnerability. If a user visits a malicious website while the application is running, remote attackers can write arbitrary files to any path and potentially lead to arbitrary code execution. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |